MacAce Posted September 13, 2022 Share #1 Posted September 13, 2022 (edited) Hello, I have installed 918+ DSM7.0.1 42218 Update 5 via automated Redpill loader 0.4 alpha 7 at a barematel Asus Mainboard with an I5-7500. The System works without Problems. The Mainboard has one 1GBit Nic. Installation via normal Tinyloader was not possible -> Bootloop. (7.1 was possible, but i need the AME and have no Original Serial) Now i want to install a second Nic with 2.5GBit. I use the driver package from bb-qq at github. The package is installed and runs Releases · bb-qq/r8152 · GitHub The NIC is a CLUB 3D CAC-1420. I use this manual for the installation: Leinen los – Synology NAS mit 2.5 GBit ans Netzwerk anbinden – The Database Me When i go via SSH in the System, I see the Card (lsusb). But the card is not assigned to a eth port. (Ifconfig -a) There is only the eth0 from the internal nic from the Mainboard. The same error came with a D-Link 1GB Nic. But this became the eth0 and works, when I disable the Internal NIC from the Mainboard. The 2.5GB do not this, I become no connection. The automated redpill loader has access to the 2.5GB Nic and give him a IP. When I add mac1 with macadress, mac2 with macadress and netif_num: "2" in the config from the automated loader it makes no different. I think I must assign the eth1 to the hardware adress from 2.5 Nic, but how I do this ? Edited September 13, 2022 by MacAce Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.