Jump to content
XPEnology Community

DSM 7.1.1-42962


pipsen
Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4 (DS3615xs)
- Loader version and model: ARPL 5.0A1 - DS3622xs+
- Installation type: BAREMETAL - HP Microserver Gen8 - Xeon E3-1260L

- Additional comments: ARPL made this whole process super easy. 5 drives migrated perfectly.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 4
- Loader version and model: TCRP v0.9.2.9 DS3622xs+
- Installation type: BAREMETAL - HP Microserver Gen8 - Xeon E3-1260L

- Additional comments: the first time I've forgot to update the disk number before migrating, but after doing it and build it again the disk appears perfectly.

Link to comment
Share on other sites

  • 2 weeks later...
On 10/7/2022 at 3:05 PM, nicoueron said:

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DS3622xs+ DSM 7.1
- Loader version and model:  Tinycore-Redpill v0.9.2.7 Loader DS3622xs+
- Using custom extra.lzma: no
- Installation type: baremetal HP gen7 N54L

- Additional comments: AME now OK :) with real SN/mac

hi pal by any chance would you be able to make a .img file of your usb drive please pal as i cannot get the bootloader to compile for me and i have followed the steps 3 times lol

Link to comment
Share on other sites

  Outcome of the update: SUCCESSFUL

- DSM version prior update: new baremetal

- Loader version and model: Automated Redpill Loader v1.0-beta2, DS920+

- Using custom extra.lzma: NO  

- Installation type: Bare Metal, Asrock J5040-itx, 32gb RAM, SATA expansion card Marvell 88SE9215 (4 disks)

- Additional comments:  Created the bootloader with "arpl v1.0-beta2" from scratch + edit "Serialnumber & Mac".

Edited by chamurai
Link to comment
Share on other sites

  • 3 weeks later...

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 4
- Loader version and model: RedPill 0.8.0.5 (DS3622xs+ : broadwellnk-7.1.0-42661)
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - MSI H110M-VH PLUS | NIC: Realtek RTL8111H Gigabit LAN controller | Intel G4400

- Additional comments:  Updated to Automated Redpill, changed SN and MAC address

 

Quote

- Created a new flash disk with Automated redpilll loader (ARPL) v1.0 Beta 6 with build number set to 42661

- Booted to DSM with the new loader and updated to 42962 via GUI

- Booted to ARPL, changed the builder number to 42962 and re-built the loader

- Booted to DSM and allowed it to complete the upgrade process

 

Link to comment
Share on other sites

Hi there !

I'm going to buy a Dell optiplex 3070 with an i3-9100 CPU.

I want to build a NAS with NVR capability.

My actual configuration is like this (Only Hikvision brand) :

3 X AI 8Mpx cameras : DS-2CD2786G2

1 X NVR with 6To storage : DS-7608NI-K2/8P

The goal is to replace the NVR and I have 2 solutions:

1. Cloud storage with TrueNas core or something else

2. Cloud storage and with surveillance station with DSM 7.1

 

I need your help.

Could you tell me what is the best solution and what is the best process to make it successful ?

 

Thanks a lot for your help :)

 

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: TCRP Friend 0.0.3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8

- Additional comments: Upgraded like an original Synology NAS

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: TCRP Friend 0.0.3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS P8H61-M-LE-R2

- Additional comments: Upgraded like an original Synology NAS

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: TCRP Friend 0.0.3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS P5N7A-VM

- Additional comments: Upgraded like an original Synology NAS

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: TCRP Friend 0.0.3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-B75M-HD3

- Additional comments: Upgraded like an original Synology NAS

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: TCRP Friend 0.0.3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-Z68X-UD3H-B3

- Additional comments: Upgraded like an original Synology NAS

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426

- Loader version and model: TCRP Friend 0.0.3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL – Lenovo Thinkcentre M910S

- Additional comments: Upgraded like an original Synology NAS

Link to comment
Share on other sites

  • 5 weeks later...

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 with update 1
- Loader version and model: tinycore-redpill v0.9.3.0
- Using custom extra.lzma: NO
- Installation type: Baremetal DS3615xs Asus M5A78L-M LX/BR Phenom II X4, RAM: 6GB, 4x 1TG + 2X 2GB + SSD 480GB (cache)

- Additional comments: First installation

 

- Outcome of the update: UNSUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 update 1

- DSM version update: DSM 7.1.1-42962  update 2 and 3
- Loader version and model: tinycore-redpill v0.9.3.0
- Using custom extra.lzma: NO
- Installation type: Baremetal DS3615xs Asus M5A78L-M LX/BR Phenom II X4, RAM: 6GB, 4x 1TG + 2X 2GB + SSD 480GB (cache)

- Additional comments: all updates result in infinity boot to recover

Edited by Trabalhador Anonimo
Add information
Link to comment
Share on other sites

  • 4 weeks later...
On 10/17/2022 at 12:42 PM, wessu said:

- Outcome of the update: SUCCESSFUL (after loader update)
- DSM version prior update: DSM 7.1.0-42661
- Loader version and model: Manual Redpill Loader DS2422+
- Using custom extra.lzma: NO
- Installation type: Baremetal ( Intel i3 10th generation on Gigabyte Z590 AC)

- Additional comments:  I did a GUI update and did not update TCRP. I got recovery loop. So I had to update TCRP to 7.1.1-42962 after I did clean command. Redo the user-config.json and add the Realtek 2.5 GBe via R8125 extension. Build for apollolake 7.1.1-42962 then I was able to proceed to DSM7. I got an error with 2FA. I did not know how to reset the box since it is not a synology box. Luckily, I had SSH and I re-enabled the admin account. I was able to set it up then login to DSM7. It took me ton of time to figure all this out. If you are updating. Do yourself a favor and disable 2FA prior to the update. Admin account setup via SSH link

Hi what name about this motherboard?

 

Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 update 3
- Loader version and model: ARPL v1.0-beta11a
- Using custom extra.lzma: NO
- Installation type: Baremetal DS920+, ASRock Fatal1ty Z170 Gaming-ITX/ac RAM, Intel® Core™ i3-7100 Processor, 2x4GB DDR3, 6 x SATA3 6.0 Gb/s Connectors (Intel onboard controller), PCI-E card with ASMedia ASM1166 controller (6 extra SATA3 ports), EATON 5SC500i UPS, 6 SATA3 HDDs (SHR), 2 SATA3 SSD (Cache)

- Additional comments: manual Update from DSM 7.1.1-42962 update 3 to DSM 7.1.1-42962 update 4 via synology_geminilake_920+.pat

Link to comment
Share on other sites

 Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42661 Update 4
- Loader version and model: ARPL v1.1-beta2 - DS3622xs+ / Broadwellnk- 7.1.1-42962 to update 4
- Using custom extra.lzma: NO
- Installation type: Baremetal - Gigabyte - intel i3 --> 

- Additional comments: NIC Gigabyte eth0 OK for installation - add NIC USB2.5 Realtek, ok works; but NIC Qnap 10G doesn't work (AQC107 FAIL) - 

Edited by Mary Andrea
Link to comment
Share on other sites

  • 1 month later...

- Outcome of the update: SUCCESSFUL
- DSM version prior update: TCRP v0.4.4 DS3615xs DSM 7.0.1-42218
- Loader version and model: TCRP v0.9.4.3 DS3622xs+ DSM 7.1.1-42962 Update 1
- Using custom extra.lzma: no
- Installation type: BAREMETAL HP N54L

- Additional comments: Had to modify DiskIdxMap=0001 and SataPortMap=9 to get all my 6 HDDs to work.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...