DSM 7.1.1-42962

[Flautista1988]

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3 with Jun's Loader 1.03
- Loader version and model: Automated Redpill Loader 0.4 alpha 11, DS3615xs
- Using custom extra.lzma: NO                     
- Installation type: Baremetal (Intel Core I5 4660 on Asus Motherboard)

- Additional comments:  Created the bootloader with "arpl 0.4 alpha 11"

[Pandadoo]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3 -25426
- Loader version and model: Automated Redpill Loader (ARPL) 0.4 alpha 11  DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HPE GEN10 PLUS Microserver (Pentium G5420 stock)

- Additional comments: Straight from Jun's 6.2.3 to 7.1.1 with ARPL 0.4 alpha11.

Standard install in ARPL (Choose Model + Build number + Serial Number + Build the loader + Boot the loader)

[Jseinfeld]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3 -25426
- Loader version and model: Automated Redpill Loader 0.4 alpha 11  DS920+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Asrock J4105

- Additional comments: This was a pretty simple upgrade. Here are some tips

 

• After install, the NAS would boot but would seemed to shutdown mid-way automatically. Ping would work, but HTTP would refuse connections. Turned out to be the i915 module. Rebuild the loader with defaults and it worked great.
• For some reason 1 of 6 disks was detected as eSATA. Changing the physical port the disk was attached to worked
• Apart from these, it was a simple process. Everything works great. Even have the /dev/dri folder working

[artyom]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3-25426
- Loader version and model: TCRP 0.9.2.4 UEFI - DS918+
- Using custom extra.lzma: No
- Installation type: Bare Metal, Asrock J4105-ITX 8 Gb Ram

- Additional comments: Normal update works perfectly with clean install and migration.

[satdream]

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs => Automated Redpill Loader 0.4 alpha 12  DS3622xs+

- Using custom extra.lzma: Yes

- Installation type: BAREMETAL - HP Microserver Gen8 - 16Gb - Intel Xeon E3-1265L v2 2.5 Ghz - Intel NIC - SAS9202-16E-LSI - QNAP USB 3.0 Ethernet 5GbE

- Additional comments: 

1. Migrated from DS3617xs JUN'S LOADER v1.03b to ARPL 0.4 Alpha 12 7.0.1 42218
2. Migrated from DS3617xs ARPL 0.4 Alpha 12 7.0.1 42218 to 7.1.1 Update 1 42962
3. Migrated from DS3617xs ARPL 0.4 Alpha 12 7.1.1 Update 1 42962 to DS3622xs+ 7.1.1 Update 1 42962

 

Had to update QNAP USB 3.0 Ethernet 5GbE driver with broadwellnk driver, then 1x spare disk to reinitialize but 20 HDDs + 2 SSDs perfectly working (2x SSD + 4 HDDs within Gen 8 + 4 HDDs in External SAS Rack + 12 HDDs in External SAS Rack)

[htanh034]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661
- Loader version and model: Tinycore-Redpill v0.9.2.6 Loader DS3622xs+
- Using custom extra.lzma: NO
- Installation type: ESXi-7.0U2

- Additional comments:

./rploader.sh postupdate broadwellnk-7.1.0-42661 power auto off >>> ./rploader.sh build broadwellnk-7.1.1-42962 >>> ok

[WujcioPafcio]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 4
- Loader version and model: TCRP 0.9 DS920+
- Using custom extra.lzma: NO
- Installation type: Proxmox, AMD PRO A8-8650B

- Additional comments:  Updated TCRP to 0.9.2.6, edited user_config.json to apply serial and MAC addresses, build.
After upgrade loader and load DSM, promted migration, set file from origin synology source.

Commands

./rploader.sh clean now
./rploader.sh update now
./rploader.sh fullupgrade now
rm /mnt/sdd3/auxfiles/ds*
./rploader.sh serialgen DS920+ realmac
./rploader.sh identifyusb now
./rploader.sh satamap now
./rploader.sh ext geminilake-7.1.1-42962 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-virtio/rpext-index.json
./rploader.sh ext geminilake-7.1.1-42962 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-acpid/rpext-index.json
./rploader.sh build geminilake-7.1.1-42962
exitcheck.sh reboot

[Rebutia]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 1
- Loader version and model: TCRP v0.9.2.6 Loader DS3622xs
- Using custom extra.lzma: No
- Installation type: Bare metal - J1900 based industrial ITX motherboard with 12 SATA
- Additional comments:  Upgrade with TCRP bringfriend feature. I would like to use Realtek USB 2.5G dongle and dodo-dk's ACPID. So I install both extensions in 7.1.0-42661, build the loader in manual mode. And then enable the bringfriend feature. Firstly, going into DSM 7.1-42661, then secondly I upgrade to 7.1.1-42962 U1 through GUI. After restarting both extensions work fine and stable in 7.1.1-42962 U1.
The following commands are for your reference, they might not work with your case.

./rploader.sh update
./rploader.sh fullupgrade
./rplaoder.sh satamap 
./rploader.sh serialgen DS3622xs+
./rploader.sh identifyusb
./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/dodo-dk/rp-ext/main/acpid/rpext-index.json
./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8152/rpext-index.json
./rploader.sh build broadwellnk-7.1.0-42661 manual
./rploader.sh bringfriend
exitcheck.sh reboot

[MichelD]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: TCRP v0.8.0.5 DS918+ DSM 7.1.0-42661u4
- Loader version and model: TCRP v0.9.2.6 DS918+
- Using custom extra.lzma: no
- Installation type: BAREMETAL – Celeron G4900; Asrock H310M-HDV; 4GB DDR4, 3 disks, onboard NIC RTL8111H
- Additional comments:
Step1
- Manual upgrade to DSM7.1.1-42962u1 from GUI
- Powered off system during reboot, using the PSU switch

 

Step2
- Removed the TCRP v0.8.0.5 thumbdrive
- Booted from a new TCRP v0.9.2.6 thumdrive:

./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh serialgen DS918+
./rploader.sh identifyusb now
./rploader.sh satamap now
./rploader.sh backup
./rploader.sh build apollolake-7.1.1-42962
exitcheck.sh reboot

[Huey_Pilot]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 1
- Loader version and model: tinycore-redpill.v0.9.2.6 - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Thecus - N4200eco

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 1
- Loader version and model: tinycore-redpill.v0.9.2.6 - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Qnap - TS-453A

- Additional comments:

At first the wrong VID and PID for the USB, so I manualy edit the user_config file with the right VID and PID for the USB and that worked.

[vencafm]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3-25426 Update 3
- Loader version and model: Automated Redpill Loader 0.4 alpha 12  DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL Fujitsu Esprimo P720 E90+ MT, Intel Core i3 4160 3.6 GHz, 8 GB RAM

- Additional comments: The upgrade was smooth. Just some application required to be repaired like Plex.

[zoulou13]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: TCRP v0.4.6 DS3615XS DSM 7.0.1-42218
- Loader version and model: TCRP v0.9.2.6 DS3622XS+ DSM 7.1.1-42962 Update 1
- Using custom extra.lzma: no
- Installation type: ESXI 6.5 update 3

[Badger]

- Outcome of the update: UNSUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 4
- Loader version and model: ARPL 5.0 alpha 1
- Using custom extra.lzma: NO
- Installation type: Baremetal - MSI  MS 7641 V3 w/old AMD CPU

- Additional comments: Tried to update to 7.1.1 42962, but no luck.  Created new usb flash drive with ARPL...  selected DS3622xs+...  build 42962....  typed in my previous SN... stuck on "booting"...  never completed boot.  

 

[nicoueron]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DS3622xs+ DSM 7.1
- Loader version and model:  Tinycore-Redpill v0.9.2.7 Loader DS3622xs+
- Using custom extra.lzma: no
- Installation type: baremetal HP gen7 N54L

- Additional comments: AME now OK  with real SN/mac

[Badger]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 4
- Loader version and model: TCRP v0.9... I think?  Loader DS3622xs+ w/ Broadwellnk-7.1.1-42962 update 1
- Using custom extra.lzma: NO
- Installation type: Baremetal - MSI  MS 7641 V3 w/old AMD CPU, 4GB ram, 3 2TB disks

- Additional comments: Lots of trial and fail on this one.  New loader via ARPL did not work (IP showed in router, by couldn't connect).  New loader from fresh TCRP v0.9 download same result (IP showed, but no connect).  Decided to go back to TCRP v0.8, but couldn't find an img download anywhere.  Found an old v8 img on my pc and created new usb stick with TCRP 8.  Proceded with Flyride's tutorial for install/migration to 7.x via TCRP.... then "./rploader update" appeared to upgrade TCRP to v0.9.  Went step by step through the guide (chose 7.1.1-42962).  Had to edit config.json and change build number to 7.1.1-42962... change SN to the previous build's SN.  Booted and it showed as "Migratable".  Dowloaded 42962 .pat file from Synology download center and installed keeping all data and settings.  Whew!

[zoulou13]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: TCRP v0.4.6 DS3615xs DSM 7.0.1-42218
- Loader version and model: TCRP v0.9.2.6 DS3622xs+ DSM 7.1.1-42962 Update 1
- Using custom extra.lzma: no
- Installation type: BAREMETAL HP N54L

[Dragsdal]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.0.1-42218 Update 3

- Loader version and model: Tinycore-Redpill v0.9.2.7 (DS3615xs)

- Using custom extra.lzma: No

- Installation type: Baremetal - HP Proliant Microserver N40L

- Additional comments: My previous loader was Tinycore-Redpill 0.4.6 and I initially tried using Automated Redpill Loader 0.5 Alpha 1, but it threw me into an endless booting loop. Nearly having a heartattack thinking my HDDs were wiped/unavaliable, I then tried upgrading to Tinycore-Redpill v0.9.2.7. Luckily that worked.

Edited October 12, 2022 by Dragsdal

[shibby]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Redpill TinyCore v0.8 Loader DS920+ with M-Shell and Jun`s mod (DS920+J)
- Using custom extra.lzma: No
- Installation type: Bare metal - Asus H170M-Plus, Core i5-6500T
- Additional comments: I didn't have to do anything before or after upgrade

[hagewk]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 3
- Loader version and model: TCRP v0.9.2.7 DS918+
- Using custom extra.lzma: NO
- Installation type: Bare Metal, Asrock J4105-ITX 8 GB

- Additional comments: Updated to new TCRP v0.9.2.7 stick prior to update

 

./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh serialgen DS918+
./rploader.sh identifyusb now
./rploader.sh satamap now
./rploader.sh backup
./rploader.sh build apollolake-7.1.1-42962
exitcheck.sh reboot

[Sharkboy]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 1
- Loader version and model: Redpill Loader DS918+ 0.9.2.7
- Using custom extra.lzma: NO
- Installation type: BAREMETAL –  MSI Z170 A PRO / Intel I7-6700K

[sliders]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 Update 1 via GUI
- Loader version and model: Tinycore-Redpill v0.8 - DS920+
- Installation type: BAREMETAL - HP ProDesk 400 G4 -Ram 16Go

[nk950357]

Outcome of the update: SUCCESSFUL
- DSM version prior update: from DSM 7.1-42661 to  DSM 7.1.1-42962 Update 1 via GUI
- Loader version and model: Automated Redpill Loader 0.5 alpha 1, DS918+
- Using custom extra.lzma: NO                     
- Installation type: Baremetal (ASUS PRIME B365M with Intel Core i3 8100T)

- Additional comments: 

Update from tinycore-redpill. Just flash arpl into usb drive, configuring by ip:7681, then reboot (by reboot button on case, so no any display needed).

Do update progress in DSM before configuring arpl. Because I've ssd cache before, after rebooting you'll got all data missing because ssd cache isn't working.

Don't worry, don't be scared like me. You may found that volume missing so you can't edit libsynonvme.so.1 easily by copying it into volume, try copy to an usb, edit it to match your ssd, paste it to original place and chmod it, reboot. Everything backs to work besides wallpaper and language setting missing.

Edited October 15, 2022 by nk950357

[wessu]

- Outcome of the update: SUCCESSFUL (after loader update)
- DSM version prior update: DSM 7.1.0-42661
- Loader version and model: Manual Redpill Loader DS2422+
- Using custom extra.lzma: NO
- Installation type: Baremetal ( Intel i3 10th generation on Gigabyte Z590 AC)

- Additional comments:  I did a GUI update and did not update TCRP. I got recovery loop. So I had to update TCRP to 7.1.1-42962 after I did clean command. Redo the user-config.json and add the Realtek 2.5 GBe via R8125 extension. Build for apollolake 7.1.1-42962 then I was able to proceed to DSM7. I got an error with 2FA. I did not know how to reset the box since it is not a synology box. Luckily, I had SSH and I re-enabled the admin account. I was able to set it up then login to DSM7. It took me ton of time to figure all this out. If you are updating. Do yourself a favor and disable 2FA prior to the update. Admin account setup via SSH link

[nayre]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1 Update 3

- DSM version after update: DSM 7.1.1-42962 Update 1
- Loader version and model: Automated Redpill Loader 0.4 alpha 5, DS920+
- Using custom extra.lzma: NO
- Installation type: Bare Metal, Asrock J5040-itx, 32gb RAM, 4 disk connected to the MB, all detected

- Additional comments:  smooth and stitchless update from Jun 6.1-1.02, even CC2531 ZigBee USB stick and HA in docker started work without any problems

Edited October 18, 2022 by nayre

[knopie]

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 4

- DSM version after update: DSM 7.1.1-42962 Update 1
- Loader version and model: TCRP v0.9.2.7 DS3622XS+
- Using custom extra.lzma: NO
- Installation type: Bare Metal, MSI, G4400, 16 GB

- Additional comments:  Updated via GUI to 7.1.1  after that I updated to new TCRP v0.9.2.7 

./rploader.sh clean
./rploader.sh update
./rploader.sh fullupgrade
reboot , version TCRP v0.9.2.7 is active
./rploader.sh update
./rploader.sh fullupgrade
./rploader.sh satamap
./rploader.sh serialgen DS3622xs+
./rploader.sh identifyusb
./rploader.sh backup
./rploader.sh build broadwellnk-7.1.1-42962
./rploader.sh bringfriend
exitcheck.sh reboot

 

TCRP friend is active, after first reboot TCRP friend rebooted once again after copying some files.