Jump to content
XPEnology Community

DSM 7.1.1-42962


pipsen
 Share

Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Recommended Posts

DSM-7.1.1-42962-ReleaseNote.jpg

 

https://www.synology.com/en-global/releaseNote/DSM

 

Spoiler

Version: 7.1.1-42962
(2022-09-05)


Important Notes

  • Starting from this version, the bad sector count column will not be displayed along with hard drive information. Users should go to each drive's Health Info > History to view its complete bad sector information. To determine whether bad sectors are affecting the drive, see if there's a significant increase in the number of bad sectors over time.
  • Adjusted how the system calculates the estimated lifespan for M.2 NVMe SSDs to provide a more accurate estimation.
  • Support for AAC encoded audio is widespread across end devices like smartphones, tablets, computers, and the majority of other media playback devices. The need for AAC transcoding to achieve better compatibility has significantly diminished and will be removed starting with DSM 7.1.1.
  • Surveillance Station must be updated to version 9.0.1- 7673 or above to be compatible with this update.


What’s New

  • Added support for recipient profiles for email notifications, allowing users to add multiple email addresses under each profile and customize rules for the profiles.
  • Users can now enable the quota setting for shared folders that are located on volumes with data deduplication enabled.
  • Added support for RAID arrays with 16 and 20 hard drives when creating RAID groups.
  • Supports checking the 2-factor authentication status of user accounts at Control Panel > User & Group > Users.
  • Added support for SR-IOV on the following the Synology network interface cards: E10G21-F2, E25G21-F2.


Fixed Issues

  • Fixed an issue where the "Enable UID/GID shifting" setting would be deactivated after modifying the time interval for updating the user/group list on an LDAP client.
  • Fixed multiple security vulnerabilities regarding CIFS-utils (CVE-2022-27239, CVE-2022-29869).
  • Fixed a security vulnerability regarding OpenLDAP (CVE-2022-29155).
  • Fixed a security vulnerability regarding cURL (CVE-2022-22576).
  • Fixed a security vulnerability regarding Zlib (CVE-2018-25032).
  • Fixed a security vulnerability regarding Freetype (CVE-2022-27406).
  • Fixed multiple security vulnerabilities regarding 802.1X (CVE-2021-30004, CVE-2021-30266).
  • Fixed multiple security vulnerabilities regarding GNU C Library(CVE-2021-43396, CVE-2022-23218, CVE-2022-23219).
  • Fixed multiple security vulnerabilities regarding YAML-cpp (CVE-2018-20573, CVE-2018-20574, CVE-2019-6285).
  • Fixed multiple security vulnerabilities regarding Linux Kernel (CVE-2019-11477, CVE-2019-11478, CVE-2019-11479, CVE-2020-12770, CVE-2019-18282, CVE-2019-19527, CVE-2019-19532, CVE-2019-19537, CVE-2021-0605, CVE-2021-3732, CVE-2021-3739, CVE-2021-3753, CVE-2021-4149, CVE-2021-4203, CVE-2021-20317, CVE-2021-20321, CVE-2021-20322, CVE-2021-29154, CVE-2021-29650, CVE-2021-34556, CVE-2021-35477, CVE-2021-39633, CVE-2021-39698, CVE-2021-45868, CVE-2022-0185, CVE-2022-0330, CVE-2022-0617, CVE-2022-0847, CVE-2022-1011, CVE-2022-1048, CVE-2022-1055, CVE-2022-1353, CVE-2022-20008, CVE-2022-27666, CVE-2022-28893, CVE-2022-29582).
  • Updated OpenSSL to version 1.1.1o to fix multiple security vulnerabilities (CVE-2022-1292, CVE-2021-3712, CVE-2022-0778).
  • Updated libarchive to version 3.6.1 to fix multiple security vulnerabilities (CVE-2021-36976, CVE-2022-26280).
  • Updated Mbed-TLS to version 2.28 to fix multiple security vulnerabilities (CVE-2021-44732, CVE-2021-45450, CVE-2021-43666).
  • Updated Python to version 3.8.12 to fix multiple security vulnerabilities (CVE-2021-3733, CVE-2021-3737, CVE-2022-0391).
  • Updated Redis to version 6.2.7 to fix multiple security vulnerabilities (CVE-2022-24735, CVE-2022-24736).
  • Updated ISC DHCP to version 4.4.3 to fix a security vulnerability (CVE-2021-25217).

 

 

Edited by pipsen
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Automated Redpill Loader DS2422+
- Using custom extra.lzma: NO
- Installation type: PROXMOX –  Intel Pentium G2030

- Additional comments: Neet to migration DSM with arpl 0.4 alpha 5

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Automated Redpill Loader 0.4 alpha 5 DS918+
- Using custom extra.lzma: NO
- Installation type: VMWare Workstation

- Additional comments: Migration from tcrp to arpl necessary

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Automated Redpill Loader 0.4 alpha 5 DS3622xs+
- Using custom extra.lzma: NO
- Installation type: VM on ESXi-7.0U3g-20328353

- Additional comments:  Created the bootloader with "arpl 0.4 alpha 5" from scratch + edit "Serialnumber", "MAC", "SataPortMap" and "DiskIdxMap"

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 3
- Loader version and model: Automated Redpill Loader DS918+
- Using custom extra.lzma: NO
- Installation type: VIRTUAL VMWARE – NUC J3455

- Additional comments: arpl v0.4 alpha 5 no boot display only configurate by web ip:7681

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 3
- Loader version and model: Redpill Jun´s mod DS918+
- Using custom extra.lzma: NO
- Installation type: VIRTUAL VMWARE – NUC J3455

- Additional comments: ./rploader.sh build apollolake-7.0.1-42218-JUN

 

 

- Outcome of the update: UNSUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 3
- Loader version and model: Tinycore Redpill DS918+
- Using custom extra.lzma: NO
- Installation type: VIRTUAL VMWARE – NUC J3455

- Additional comments: Recovery loop. No works with ./rploader.sh postupdate apollolake-7.1.0-42661

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 3
- Loader version and model: Automated Redpill Loader 0.4 alpha 5 DS918+
- Using custom extra.lzma: NO
- Installation type: Bare Metal, Asrock J5040-itx, 32gb RAM, SATA expansion card Marvell 88SE9215 (4 disks), total 8 disk detected with success

- Additional comments:  Switched from Tinycore-Redpill v0.8.0.3 to "arpl 0.4 alpha 5" + edit "Serialnumber", "MAC"

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42951
- Loader version and model: Automated Redpill Loader 0.4 alpha 6 DVA3221
- Using custom extra.lzma: NO
- Installation type: Bare Metal, HP Envy 700 PC Series

- Additional comments:  Updated to ARPL 0.4 alpha 6

 
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42951
- Loader version and model: Automated Redpill Loader 0.4 alpha 6 DS920+
- Using custom extra.lzma: NO
- Installation type: Bare Metal, Dell Optiplex 3020 SFF

- Additional comments:  Updated to ARPL 0.4 alpha 6

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661-update4
- Loader version and model: Automated Redpill Loader 0.4 alpha 6 DS918+
- Using custom extra.lzma: NO
- Installation type: Asrock N3710
- Additional comments: Switched from Tinycore-Redpill v0.8.0.3 to "arpl 0.4 alpha 6" + edit "Config manual file"

 

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661-update4
- Loader version and model: Redpill TinyCore Loader DS3615xs
- Using custom extra.lzma: NO
- Installation type: N70E-DR (1037U)
- Additional comments: Redpill TinyCore Loader 0.9

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661
- Loader version and model: Automated Redpill Loader 0.4 alpha 6 DS918+
- Using custom extra.lzma: NO
- Installation type: Bare Metal, QNAP TS-269 Pro

- Additional comments:  Updated to ARPL 0.4 alpha 6

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42951
- Loader version and model: Automated Redpill Loader 0.4 alpha 6 DVA3221
- Using custom extra.lzma: NO
- Installation type: Bare Metal, QNAP TS-469 Pro

- Additional comments:  Updated to ARPL 0.4 alpha 6

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661
- Loader version and model: Automated Redpill Loader 0.4 alpha 6 DS918+
- Using custom extra.lzma: NO
- Installation type: VM - Unraid, AMD 5950X

- Additional comments:  Migrated from TC to ARPL 0.4 alpha 6

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Automated Redpill Loader 0.4 alpha7 DS3622xs+
- Using custom extra.lzma: NO
- Installation type: VM on ESXi-7.0U3f

- Additional comments:  Migrated to  arpl 0.4 alpha 7 from tcrpI didn't even try it with tcrp, arpl works excellent, after migration I added the disks and performed a recover procedure.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: new build
- Loader version and model: Automated Redpill Loader 0.4 alpha 7 DS920+
- Using custom extra.lzma: NO
- Installation type: esxi 7u2

- Additional comments:  ARPL 0.4 alpha 7

 

However, using the same same machine, new VM

- Outcome of the update: UNSUCCESSFUL
- DSM version prior update: new build
- Loader version and model: Automated Redpill Loader 0.4 alpha 7 DS3622+
- Using custom extra.lzma: NO
- Installation type: esxi 7u2

- Additional comments:  ARPL 0.4 alpha 7

the loader was up... but it stated "no harddrive found" no matter how many time I retried... I was using vitual hard drive with 60G .... At the end, I changed to build the model DS920+ and everything went smooth...disk can be recognized... 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 update4
- Loader version and model: Redpill TinyCore v0.8 Loader DS3622xs
- Using custom extra.lzma: auto custum

Spoiler
./rploader.sh ext broadwellnk-7.1.1-42962 auto

- Installation type: BAREMETAL - ASRock Rack C2550D4I
- Additional comments:  Redpill TinyCore Loader v0.9 (develop) DS3622xsUpdate Loader FIRST, migrating DSM after.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 3
- Loader version and model: TCRP 0.9 DS918+
- Using custom extra.lzma: NO
- Installation type: Bare Metal, Asrock J4105-ITX 16 GB

- Additional comments:  Updated to new TCRP 0.9 stick prior to update

 

- Outcome of the update: unsuccessful -->SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 3
- Loader version and model: TCRP 0.9 DS918+
- Using custom extra.lzma: NO
- Installation type: Bare Metal, Asrock J4105-ITX 8 GB

- Additional comments:  normal update with TCRP 0.9 did not work. With ARPL update to DS920+ and then back to DS918+ with TCRP. Lost some configuration on my backup system.

Link to comment
Share on other sites

- A frissítés eredménye: SUCCESSFUL
- DSM verzió előzetes frissítés: Tinycore-Redpill v0.9.0.2 - DS3622xs+
- Loader verzió és modell: Automatizált Redpill Loader 0.4 alpha 8 DS3622xs+
- Egyéni extra.lzma használata: NO
- Telepítés típusa: BAREMETAL - HP GEN8 MICROSERVER, Xeon E3 1220v2

- További megjegyzések: ARPL 0.4 alpha 8

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 4
- Loader version and model: TCRP 0.9 DS920+
- Using custom extra.lzma: NO
- Installation type: Virtualbox, Host Intel 8265U

- Additional comments:  Not use GUI, im upgrade loader

./rploader.sh clean
./rploader.sh update                       // TCRP 0.9.1.7 -> 0.9.1.9
rm /mnt/sda3/auxfiles/ds*                  // remove any previous .pat files
./rploader.sh build geminilake-7.1.1-42962 // fresh build with actual config to promnt migration
exitcheck.sh reboot

After upgrade loader and load DSM, promted migration, set file from origin synology source, enjoy

  • Thanks 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Automated Redpill Loader 0.4 alpha 8 DS3622xs+
- Using custom extra.lzma: NO
- Installation type:  BAREMETAL - HP GEN8 MICROSERVER, Xeon E3 1260L

- Additional comments: Migration from tcrp to ARPL 0.4 alpha 8 necessary

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962
- Loader version and model: Automated Redpill Loader 0.4 alpha 7 DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP GEN8 MICROSERVER, Xeon E3 1220v2

- Additional comments:  Created the bootloader with "arpl 0.4 alpha 7" from scratch + edit "Serialnumber".

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962
- Loader version and model: Automated Redpill Loader 0.4 alpha 8, DS918+
- Using custom extra.lzma: NO
- Installation type: VMWare ESXi 6.7.0 U3b @ custom build Asus Z170I-PRO, Intel Core i5-6600K,

- Additional comments:  Created the bootloader with "arpl 0.4 alpha 8" from scratch 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 update4
- Loader version and model: Redpill TinyCore v0.8 Loader DS3622xs
- Using custom extra.lzma: No- Installation type: BAREMETAL - MSI MB, Intel Core i5-8400
- Additional comments:  Redpill TinyCore Loader v0.92 (develop) DS3622xs. Update Loader FIRST, migrating DSM after. I found Redpill TinyCore Loader v0.92 easier than  Automated Redpill Loader 0.4 alpha 8. ( I tried but not successful)

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962
- Loader version and model: Automated Redpill Loader 0.4 alpha 9, DS3622xs+
- Using custom extra.lzma: NO
- Installation type: VMware Workstation

- Additional comments:  Created the bootloader with "arpl 0.4 alpha 9"

 

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Automated Redpill Loader DS3622xs+
- Using custom extra.lzma: NO
- Installation type: Bare metal Dell T3500, Xeon® Processor W3530
- Additional comments:  Switched from Tinycore-Redpill to Automated Redpill Loader but i didnt check if Tinycore-Redpill will do the job

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Redpill TinyCore v0.9 Loader DS3622xs
- Using custom extra.lzma: No
- Installation type: Bare metal - ASROCK QC5000-ITX/PH with AMD  FT3 Kabini A4-5000 Quad-Core APU
- Additional comments:  Redpill TinyCore Loader v0.9  DS3622xs

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Redpill TinyCore v0.9 Loader DS3622xs
- Using custom extra.lzma: No
- Installation type: ESXi-7.0U3f - ASROCK QC5000-ITX/PH with AMD  FT3 Kabini A4-5000 Quad-Core APU
- Additional comments:  Redpill TinyCore Loader v0.9  DS3622xs

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4
- Loader version and model: Redpill TinyCore v0.9 Loader DS3622xs
- Using custom extra.lzma: No
- Installation type: Bare metal - ASROCK M3A785GMH/128M with AMD Athlon II X2 240 
- Additional comments:  Redpill TinyCore Loader v0.9  DS3622xs
 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4 (Tinycore-Redpill v0.8.0.5 - DS3622xs+)
- Loader version and model: Tinycore-Redpill v0.9.2.2 Loader DS3622xs
- Using custom extra.lzma: No
- Installation type: BAREMETAL - ASRock C2750D4I

- Additional comments:

******TURN OFF 2FA FOR THE LOVE OF GOD*******

******TURN ON SSH IN CASE YOU DIDN'T DO ABOVE******

Upgraded to DSM 7.1.1-42962 via GUI

shutdown

pull usb, create new one under development branch

Plug back in usb

Booted into TCRP and run through whole process again of creation/ maybe use mac/sn as before if you care

exitcheck.sh reboot

enjoy

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL
- DSM version prior update: new baremetal
- Loader version and model: Automated Redpill Loader 0.4 alpha 11, DS3622xs+
- Using custom extra.lzma: NO
- Installation type: Baremetal (Asrock AD525PV3)

- Additional comments:  Created the bootloader with "arpl 0.4 alpha 11"

 

Outcome of the update: SUCCESSFUL
- DSM version prior update: new baremetal
- Loader version and model: Automated Redpill Loader 0.4 alpha 11, DS3622xs+
- Using custom extra.lzma: NO                     
- Installation type: Baremetal (Intel s3420gp motherboard with Intel Xeon X3440)

- Additional comments:  Created the bootloader with "arpl 0.4 alpha 11"

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...