arunmcops Posted September 5, 2022 Share #1 Posted September 5, 2022 Hi, I have AMD 4700S system. 8 Core Ryzen, 16 GB RAM, 2 SATA Ports. 2x 2 TB WD HDDs. Which system would be workable ? 3622xs+ or any other ? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 5, 2022 Share #2 Posted September 5, 2022 AMD 4700S is an unusual type of embedded board, but it seems to work like the Ryzen series anyway. In the case of Ryzen CPUs, there seems to be no need to hide the model. DS3622xs+ is also stable DS1621+ itself is also a model equipped with an AMD CPU based on the original v1000 platform. Quote Link to comment Share on other sites More sharing options...
arunmcops Posted September 19, 2022 Author Share #3 Posted September 19, 2022 Tried to install with DS1621+ but encountered this error : It looks that you will need the following modules : Found SATA Controller : pciid 1022d00007801 Required Extension : No matching extension As per lspci, the sata controller is as below: 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) After creation of bootable USB, stuck at this Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 19, 2022 Share #4 Posted September 19, 2022 2 hours ago, arunmcops said: Tried to install with DS1621+ but encountered this error : It looks that you will need the following modules : Found SATA Controller : pciid 1022d00007801 Required Extension : No matching extension As per lspci, the sata controller is as below: 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) After creation of bootable USB, stuck at this Because DS1621+ is based on Device Tree, All messages related to Sata controller and port mapping from the TCRP loader build process can be ignored. Instead, you just need to see if the dtbpatch or redpill-dtb-static ext driver is being installed normally. That kernel boot screen is normal. Now use find.synology.com in another PC's web browser. Quote Link to comment Share on other sites More sharing options...
arunmcops Posted September 19, 2022 Author Share #5 Posted September 19, 2022 9 minutes ago, Peter Suh said: Instead, you just need to see if the dtbpatch or redpill-dtb-static ext driver is being installed normally. How to do this ? process ? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 19, 2022 Share #6 Posted September 19, 2022 5 minutes ago, arunmcops said: How to do this ? process ? Go back to the last Tinycore in the USB GNU grub boot menu and check which ext drivers are included with the command below. tc@box:~$ ls -l *load/c*/e* Quote Link to comment Share on other sites More sharing options...
arunmcops Posted September 19, 2022 Author Share #7 Posted September 19, 2022 Tried again with DS3622xs+. Sata controller and port mapping went ok but same issue again .. It looks that you will need the following modules : Found SATA Controller : pciid 1022d00007801 Required Extension : No matching extension Any extention available or any way to add it ? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 19, 2022 Share #8 Posted September 19, 2022 Tried again with DS3622xs+. Sata controller and port mapping went ok but same issue again .. It looks that you will need the following modules : Found SATA Controller : pciid 1022d00007801 Required Extension : No matching extension Any extention available or any way to add it ? If user_config.json can be edited before loader build, leave sataportmap and diskidxmap blank with “”. Do not use satamap actionSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 20, 2022 Share #9 Posted September 20, 2022 Like This. tc@box:~$ cat user_config.json { "extra_cmdline": { "pid": "0xa4a5", "vid": "0x0525", "sn": "1230LWN009033", "mac1": "0011322A46E7", "SataPortMap": "", "DiskIdxMap": "" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { } } Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 20, 2022 Share #10 Posted September 20, 2022 1 hour ago, Peter Suh said: Like This. tc@box:~$ cat user_config.json { "extra_cmdline": { "pid": "0xa4a5", "vid": "0x0525", "sn": "1230LWN009033", "mac1": "0011322A46E7", "SataPortMap": "", "DiskIdxMap": "" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { } } I followed ThorGroup's advice as Pocopico described in TCRP's sataport() function. ------------------------------------------------------- ThorGroup advised not to map the controller ports beyond the MaxDisks limit, but there is no harm in doing so - unless additional devices are connected along with SATABOOT. This will create a gap/empty first slot. Quote Link to comment Share on other sites More sharing options...
arunmcops Posted September 20, 2022 Author Share #11 Posted September 20, 2022 13 hours ago, Peter Suh said: Like This. tc@box:~$ cat user_config.json { "extra_cmdline": { "pid": "0xa4a5", "vid": "0x0525", "sn": "1230LWN009033", "mac1": "0011322A46E7", "SataPortMap": "", "DiskIdxMap": "" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { } } Done it. No result. Same status. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted September 20, 2022 Share #12 Posted September 20, 2022 On 9/19/2022 at 8:43 PM, arunmcops said: Tried to install with DS1621+ but encountered this error : It looks that you will need the following modules : Found SATA Controller : pciid 1022d00007801 Required Extension : No matching extension As per lspci, the sata controller is as below: 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) After creation of bootable USB, stuck at this pid/vid should be replaced with that of your usb stick. It should not be used as I wrote it. The only thing I want to emphasize is this. SataPortMap": "", "DiskIdxMap": "" And that black console has nothing more to do. Another need to type find.synology.com in your PC's web browser and monitor the IP assignment. Quote Link to comment Share on other sites More sharing options...
arunmcops Posted September 21, 2022 Author Share #13 Posted September 21, 2022 11 hours ago, Peter Suh said: pid/vid should be replaced with that of your usb stick. It should not be used as I wrote it. The only thing I want to emphasize is this. SataPortMap": "", "DiskIdxMap": "" And that black console has nothing more to do. Another need to type find.synology.com in your PC's web browser and monitor the IP assignment. 😁 Honest mistake. Will do that today evening. I too was confused as to why json file is showing different VID/PID as well as MAC ID than actual hardware. 1 Quote Link to comment Share on other sites More sharing options...
arunmcops Posted September 21, 2022 Author Share #14 Posted September 21, 2022 Thanks for your continuous support. Today I went through a lot of your posts, and learnt a lot. A heartfelt thanks from community of fellows who are new to Xpenology. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.