olson_canadian Posted August 17, 2022 #1 Posted August 17, 2022 Hi everyone, I've been using Xpenology for quite some time. I have two systems both running 6.2.3-25426. I've setup test systems to try to upgrade to 6.2.4-x, but they always fail. I can't remember why, but I've moved past that branch and want to move to the 7.1.x-x branch now. My main Xpenology NAS is running an intel core i5-6600T CPU, but my other NAS that mirrors the main NAS is running an AMD FX 4170 on an Asus motherboard. (Can't remember the model off hand) Setting up 7.1 is a breeze on my intel PC, but I was curious if there is a way to move to 7.1.x-x. on the AMD FX PC? I've tried Pocopico's tinycore-redpill, but the USB won't boot into tinycore at all. Is the AMD FX CPU no longer a viable Xpenology solution anymore? Any help would be very much appreciated. Thx! Quote
Ylamarche5382 Posted August 17, 2022 #2 Posted August 17, 2022 I used ARPL and installed the DS3622xs loader on an AMD FX and it works perfectly (DSM 7.1) 1 Quote
olson_canadian Posted August 17, 2022 Author #3 Posted August 17, 2022 2 hours ago, Ylamarche5382 said: I used ARPL and installed the DS3622xs loader on an AMD FX and it works perfectly (DSM 7.1) Thank you so much for letting me know about this! I'm going to try it out now. Quote
Ylamarche5382 Posted August 17, 2022 #4 Posted August 17, 2022 Just a detail, be sure to install the correct drivers. If you have a realtek card here is the driver to add: https://github.com/fbelavenuto/arpl-addons/releases/download/v1.6/r8169.addon when you add a driver, you will then have to go to "User Drivers" and enable it 1 Quote
olson_canadian Posted August 17, 2022 Author #5 Posted August 17, 2022 2 minutes ago, Ylamarche5382 said: Just a detail, be sure to install the correct drivers. If you have a realtek card here is the driver to add: https://github.com/fbelavenuto/arpl-addons/releases/download/v1.6/r8169.addon when you add a driver, you will then have to go to "User Drivers" and enable it Thx! I have a Realtek RTL8105. Would you happen to have a link for the driver for it? Quote
olson_canadian Posted August 17, 2022 Author #7 Posted August 17, 2022 (edited) 3 hours ago, Ylamarche5382 said: The one I sent should work Hi, I seem to be having an issue. I was hoping you could help me speed up my troubleshooting. I have the loader built but it seems to hang when booting. As you'll see in the screenshot I attached, I'm getting a netif_num message. I have two NIC's. The built in 1GB Realtek and the PCI-e rtl8125 2.5 Gbe NIC. I'm not sure what "set netif_num to 0 ***" means. I'm guessing that it's not literal when asking me to add the stars, but I figured I'd ask just in case. Thank you in advance EDIT: I should have read fbelavenuto's github more thoroughly. I didn't realize that I would have to add drives manually for "sataportmap" and "diskidxmap". But I'm not sure how to do that. If you could help me with that, that would be awesome! Edited August 17, 2022 by olson_canadian Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.