pistachio Posted August 14, 2022 Share #1 Posted August 14, 2022 (edited) I've a ASROCK J4105 mobo with 4 sata ports and additional Marvel 4 Sata port PCI-E card. TRCP automatically detected and setup the following, which appears to be correct: Quote Found "00:12.0 Intel Corporation Device 31e3 (rev 03)" Detected 2 ports/2 drives. Override # of ports or ENTER to accept <2> Found "01:00.0 Marvell Technology Group Ltd. Device 9215 (rev 11)" Detected 4 ports/1 drives. Override # of ports or ENTER to accept <4> Found "04:00.0 ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)" Detected 2 ports/2 drives. Override # of ports or ENTER to accept <2> Computed settings: SataPortMap=242 DiskIdxMap=000206 All 5 inserted disks work perfectly in 7.1 but the "Drive Information" diagram only shows 4 available drives *see screenshot below*. How do I fix this? Edited August 14, 2022 by pistachio added details Quote Link to comment Share on other sites More sharing options...
pistachio Posted August 14, 2022 Author Share #2 Posted August 14, 2022 (edited) I think it has something to do with: "synoinfo": { "internalportcfg": "0xffff", But not sure what/how to change it. edit: Digging further, ffff = 1111111111111111, so 16 internal drives, which matches to the maxdrives=16. I'm still not sure why it only presents 4 drives in the display. Any ideas? Edited August 15, 2022 by pistachio Quote Link to comment Share on other sites More sharing options...
flyride Posted August 15, 2022 Share #3 Posted August 15, 2022 The number of drives displayed in the graphic has to do with the DSM platform used and cannot be easily changed. You can safely ignore it. Quote Link to comment Share on other sites More sharing options...
pistachio Posted August 15, 2022 Author Share #4 Posted August 15, 2022 (edited) Thank you! Good to know it's purely graphical. I was worried it was indicative of some misconfiguration which might affect other things like which drives the DSM partitions were installed, or if the missing drives were treated as USB etc. Is there a writeup anywhere how it is configured though? I understand the use of hex/bin but all I found so far are random examples of how people have fixed their config (albeit trial & error) but can't find a proper writeup or description anywhere. Edited August 15, 2022 by pistachio bin instead of dec Quote Link to comment Share on other sites More sharing options...
flyride Posted August 15, 2022 Share #5 Posted August 15, 2022 There is no interrelation between the graphic and the MaxDisks and the internalportcfg, esataportcfg, usbportcfg bitmasks. These only need to be changed if you plan to use more than 16 disks. Otherwise just leave them alone. Quote Link to comment Share on other sites More sharing options...
pistachio Posted August 15, 2022 Author Share #6 Posted August 15, 2022 Appreciate the clarification. Case closed, thanks for your help! Quote Link to comment Share on other sites More sharing options...
mgrobins Posted August 17, 2022 Share #7 Posted August 17, 2022 I'd still like to follow up on this if it's possible to correct it. I did think of using the RSxxxx build option so I can have a lot more visible drives and easily manage them using the gui. I think that brings issues with the drive compatibility lockdown and smart data availability though doesn't it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.