ASUS M2N68-AM

[quiri99]

With forcedeth the nas is found by assistant, but does not find hdd ... The first problem I've seen is

 

Spoiler

./rploader.sh satamap
No SATA ports mapped. Setup for compatibility with SCSI/SAS controller mapping.
Recommended settings:
SataPortMap=1
DiskIdxMap=00

in automatic mode I see that you need sata_nv and radeon, when I build with manual these drivers are added or do I have to add them manually? if I have to add them manually how can I do?

Spoiler

./rploader.sh ext broadwellnk-7.1.0-42661 auto
It looks that you will need the following modules :
Found IDE Controller : pciid 10ded000003f6  Required Extension : sata_nv
Searching for matching extension for sata_nv
Found IDE Controller : pciid 10ded000003f6  Required Extension : sata_nv
Searching for matching extension for sata_nv
Found VGA Controller : pciid 1002d0000954f  Required Extension : radeon
Searching for matching extension for radeon

some help?

hw: asus m2n68-am, amd x2 215

[D_G_B]

On 7/24/2022 at 6:51 AM, quiri99 said:

  auto (Hide contents)

It looks that you will need the following modules :
Found IDE Controller : pciid 10ded000003f6  Required Extension : sata_nv
 

some help?

hw: asus m2n68-am, amd x2 215

 

You are running on an AMD motherboard with an AMD CPU. This combination is not compatible with the broadwellnk platform that you are trying to use.

 

What you will want to do is go to your BIOS and make sure that the SATA controller is set to AHCI mode and hotswap is enabled if available (otherwise, make sure you had HDs connected to all usable SATA ports).

 

Then build a loader for the V1000 platform, which is for the AMD systems.

 

The broadwellnk platforms use SataMap and DiskIdxMap... The AMD platforms use DeviceTree...

 

Be aware, the integrated GeForce 7025 graphics controller will NOT be usable.

Edited July 27, 2022 by D_G_B
spelling