Tech_Junkie Posted July 27, 2022 Share #1 Posted July 27, 2022 Been scouring through the forums and I've seen mention that "For certain platforms, Intel CPUs must be 4th generation “Haswell” or newer with FMA3 instruction set" from this link: but when looking at the build list, Haswell is not listed? Just trying to figure out which platform to use and which version of DSM I can run on it. TIA I tried using: ./rploader.sh build geminilake-7.1.0-42661 but when it boots I get "Booting the Kernal" and it's not discoverable on the the network. Quote Link to comment Share on other sites More sharing options...
Tech_Junkie Posted July 27, 2022 Author Share #2 Posted July 27, 2022 (edited) I ended up running the following commands: ./rploader.sh listmods bromolow-7.1.0-42661 ./rploader.sh build broadwellnk-7.1.0-42661 I then was able to discover and load: DSM_DS3622xs+_42661 In business now! Is there an easy way to clone the USB drive to and internal SSD, or would you recommend leaving the OS on the USB and use the SSD for cache drive? Edited July 27, 2022 by Tech_Junkie Quote Link to comment Share on other sites More sharing options...
flyride Posted August 1, 2022 Share #3 Posted August 1, 2022 USB drive is a loader. It does not contain an OS, and is a required part of the system (it cannot be removed). If you installed DSM to a SSD, the SSD has both the OS code and your data shares on it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.