Spats Posted July 23, 2022 #1 Posted July 23, 2022 2 x Intel Xeon L5630@2.13Ghz 24Gb DDR3 ECC memory Dell Perc 200I flashed to IT mode 4 QLOGIC BCM5709C onboard INTEL PRO 1000 2 port 1 gb card Had this working great in this server, turned it off for a week, switched it back on would not boot. I took out my 2 2tb iron wolves hdd's deleted partitions put them back in built a new image with same 4 gb flash drive. no drives detected when i build same image on same flash drive. Nothing has been done to system no changes etc. I swapped out the hdd's for a 320gb hdd still no hdd being detected. any ideas what could be wrong. TIA Guys Quote
0 Spats Posted July 23, 2022 Author #2 Posted July 23, 2022 Sorted, SAS Controller was Disabled. Quote
Question
Spats
2 x Intel Xeon L5630@2.13Ghz
24Gb DDR3 ECC memory
Dell Perc 200I flashed to IT mode
4 QLOGIC BCM5709C onboard
INTEL PRO 1000 2 port 1 gb card
Had this working great in this server, turned it off for a week, switched it back on would not boot.
I took out my 2 2tb iron wolves hdd's deleted partitions put them back in built a new image with same 4 gb flash drive.
no drives detected when i build same image on same flash drive.
Nothing has been done to system no changes etc.
I swapped out the hdd's for a 320gb hdd still no hdd being detected.
any ideas what could be wrong.
TIA Guys
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.