Jump to content
XPEnology Community

Please help upgrading from DSM 5.0


Recommended Posts

Folks,

 

Can you please tell me is it worth upgrading from oldie DSM 5.0-4528 Update 1 to latest version or it's better to install a fresh one? If it can be upgraded, can you guys point me to step by step instructions (if any)?

 

Thanks

Link to comment
Share on other sites

I would recommend you try DS3622xs+. it works on most hardware.

I would also recommend you use a spare disk and USB to test so your data will be safe.

Have a look at this tutorial to understand the process:

 

Read through the tutorial again!

 

Try with these commands after you create a new USB and log into TinyCore:

 

./rploader.sh update 
./rploader.sh fullupgrade 

 

./rploader.sh serialgen DS3622xs+

./rploader.sh identifyusb 
./rploader.sh satamap 

 

./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json

./rploader.sh ext broadwellnk-7.1.0-42661https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json

./rploader.sh build broadwellnk-7.1.0-42661 manual

 

exitcheck.sh reboot

  • Thanks 1
Link to comment
Share on other sites

  • 5 months later...
On 7/14/2022 at 4:09 PM, rojoone2 said:

I would recommend you try DS3622xs+. it works on most hardware.

I would also recommend you use a spare disk and USB to test so your data will be safe.

Have a look at this tutorial to understand the process:

 

Read through the tutorial again!

 

Try with these commands after you create a new USB and log into TinyCore:

 

./rploader.sh update 
./rploader.sh fullupgrade 

 

./rploader.sh serialgen DS3622xs+

./rploader.sh identifyusb 
./rploader.sh satamap 

 

./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json

./rploader.sh ext broadwellnk-7.1.0-42661https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json

./rploader.sh build broadwellnk-7.1.0-42661 manual

 

exitcheck.sh reboot

 

 

Sorry long time didn't replied,

Does this process involve reformatting currently used SHR array of HDDs or it's possible to re-assign them in the newer version of DSM later?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...