Jump to content
XPEnology Community
  • 0

Seeking help on model installation, it always be DS920+


alantang

Question

Hello:

 

No matter whay model I choose it always use DS920+?

I have try DS3615xs & DS3622xs+ but it also show DS920+

 

Did I have somthing missed?

Below is the command that I use.

 

1.) After login tc with password, it show "tc@box:~$" at command prompt

2.) ./rploader.sh update

3.) ./rploader.sh fullupgrade

4.) ./rploader.sh identifyusb

5.) ./rploader.sh serialgen DS3615xs realmac

6.) ./rploader.sh build geminilake-7.1.0-42661

7.) exitcheck.sh reboot

I answer "y" when it prompt on each items

 

after reboot, it show the model is DS920+ in the Synology Assistant

 

Link to comment
Share on other sites

8 answers to this question

Recommended Posts

  • 0
On 7/8/2022 at 1:16 AM, pocopico said:

 

Geminilake is the ds920 , bromolow is the DS3615. It would make more sense to just use the model for building, but that was decided when the platforms were only two :D

Yeah.. kinda over looked his build command!😂

 

For the DS3615xs it should be:

1.) ./rploader.sh clean

2.) ./rploader.sh update

3.) ./rploader.sh fullupgrade

4.) ./rploader.sh identifyusb

5.) ./rploader.sh serialgen DS3615xs realmac

6.) ./rploader.sh build bromolow-7.1.0-42661

7.) exitcheck.sh reboot

 

For the DS3622xs+

 

1.) ./rploader.sh clean

2.) ./rploader.sh update

3.) ./rploader.sh fullupgrade

4.) ./rploader.sh identifyusb

5.) ./rploader.sh serialgen DS3622xs+ realmac

6.) ./rploader.sh build broadwellnk-7.1.0-42661

7.) exitcheck.sh reboot

 

For the DS920+:

 

1.) ./rploader.sh clean

2.) ./rploader.sh update

3.) ./rploader.sh fullupgrade

4.) ./rploader.sh identifyusb

5.) ./rploader.sh serialgen DS920+ realmac

6.) ./rploader.sh build geminilake-7.1.0-42661

7.) exitcheck.sh reboot

Link to comment
Share on other sites

  • 0
1 hour ago, alantang said:

Hello:

 

No matter whay model I choose it always use DS920+?

I have try DS3615xs & DS3622xs+ but it also show DS920+

 

Did I have somthing missed?

Below is the command that I use.

 

1.) After login tc with password, it show "tc@box:~$" at command prompt

2.) ./rploader.sh update

3.) ./rploader.sh fullupgrade

4.) ./rploader.sh identifyusb

5.) ./rploader.sh serialgen DS3615xs realmac

6.) ./rploader.sh build geminilake-7.1.0-42661

7.) exitcheck.sh reboot

I answer "y" when it prompt on each items

 

after reboot, it show the model is DS920+ in the Synology Assistant

 

I don't see a "clean" command in toy steps.

Are you using the same USB drive? You may need to create a new USB and start fresh.

I found that starting fresh solves many issues.

 

Try adding this as the first step in your commands:

./rploader.sh clean now

Link to comment
Share on other sites

  • 0
2 hours ago, alantang said:

Hello:

 

No matter whay model I choose it always use DS920+?

I have try DS3615xs & DS3622xs+ but it also show DS920+

 

Did I have somthing missed?

Below is the command that I use.

 

1.) After login tc with password, it show "tc@box:~$" at command prompt

2.) ./rploader.sh update

3.) ./rploader.sh fullupgrade

4.) ./rploader.sh identifyusb

5.) ./rploader.sh serialgen DS3615xs realmac

6.) ./rploader.sh build geminilake-7.1.0-42661

7.) exitcheck.sh reboot

I answer "y" when it prompt on each items

 

after reboot, it show the model is DS920+ in the Synology Assistant

 

 

Geminilake is the ds920 , bromolow is the DS3615. It would make more sense to just use the model for building, but that was decided when the platforms were only two :D

Edited by pocopico
Link to comment
Share on other sites

  • 0
4 hours ago, rojoone2 said:

Yeah.. kinda over looked his build command!😂

 

For the DS3615xs it should be:

1.) ./rploader.sh clean

2.) ./rploader.sh update

3.) ./rploader.sh fullupgrade

4.) ./rploader.sh identifyusb

5.) ./rploader.sh serialgen DS3615xs realmac

6.) ./rploader.sh build bromolow-7.1.0-42661

7.) exitcheck.sh reboot

 

For the DS3622xs+

 

1.) ./rploader.sh clean

2.) ./rploader.sh update

3.) ./rploader.sh fullupgrade

4.) ./rploader.sh identifyusb

5.) ./rploader.sh serialgen DS3622xs+ realmac

6.) ./rploader.sh build broadwellnk-7.1.0-42661

7.) exitcheck.sh reboot

 

For the DS920+:

 

1.) ./rploader.sh clean

2.) ./rploader.sh update

3.) ./rploader.sh fullupgrade

4.) ./rploader.sh identifyusb

5.) ./rploader.sh serialgen DS920+ realmac

6.) ./rploader.sh build geminilake-7.1.0-42661

7.) exitcheck.sh reboot

 

 

 

Thanks all! I think that is the point of why always show DS920+. I just new in using tinycore redpill loader. May I know how can I found those information regarding to which model using the specific build?

 

I will try it on tonight to test again!

 

*PS: I just a new USB STick to perform a new build!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...