Kyar Posted September 25, 2022 Share #826 Posted September 25, 2022 il y a 55 minutes, dodo-dk a dit : @SanKen you can change the MAC Adress: Custom MAC (Révéler le contenu masqué) @fbelavenuto Thank you very much for your hard work. Best tool ever. @Kyar i have added 4 virtual SCSI Drives in Proxmox and startet the VM and all are working, Volume create... What SCSI Controller do you use or do you use Passthrough Drives? Thanks for your reply. My config : I create a issue on github : https://github.com/fbelavenuto/arpl/issues/195 Maybe can you check if you have the same config ? Thanks you Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #827 Posted September 25, 2022 (edited) Sorry I use DS3622. I test it with 918 now. In my config I use i440fx, rest same. @Kyar if you don't need more than 6 virtual Drives, you can use SATA instead SCSI and if440fx instead q35, so it works on my test setup with 6 Drives. Edited September 25, 2022 by dodo-dk Quote Link to comment Share on other sites More sharing options...
Kyar Posted September 25, 2022 Share #828 Posted September 25, 2022 il y a 32 minutes, dodo-dk a dit : Sorry I use DS3622. I test it with 918 now. In my config I use i440fx, rest same. @Kyar if you don't need more than 6 virtual Drives, you can use SATA instead SCSI and if440fx instead q35, so it works on my test setup with 6 Drives. I have listen somewhere that SCSCI and q35 are more powerfull on emulation. Do you thinks that I can lose performance with sata and if440fx ? Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #829 Posted September 25, 2022 q35 is only need if you passthrough pci devices. I don't think there is so much different between sata and scsi on virtual Drives. It works with q35 too, my mistake was that i have limited the disks to 6 drives in arpl. I have change it to 12 and now q35 with 6 sata drives works too. I think you should test it. Quote Link to comment Share on other sites More sharing options...
Kyar Posted September 25, 2022 Share #830 Posted September 25, 2022 il y a une heure, dodo-dk a dit : q35 n'est nécessaire que si vous passez par des périphériques pci. Je ne pense pas qu'il y ait tellement de différence entre sata et scsi sur les lecteurs virtuels. Cela fonctionne aussi avec q35, mon erreur était que j'ai limité les disques à 6 disques en arpl. Je l'ai changé en 12 et maintenant q35 avec 6 disques sata fonctionne aussi. Je pense que tu devrais le tester. Ok, I have changed my HDD to SATA : They use ports 7 8 9, how can I change to 1 2 3 ? Quote Link to comment Share on other sites More sharing options...
Ting_sf Posted September 25, 2022 Share #831 Posted September 25, 2022 (edited) Hi, this is a great tool, I used this on my proxmox vm to build a ds3617xs 7.1-42661, everything seems working except I do not see my virtio nic, No problem with r8139 nic. I am using arpl-0.4-alpha11.img, and I thought I had virto 9 drive installed, but does not work. I tried to upload a .json driver (worked for me before), anybody help me out on this? much appreciated. ting actually, I resolved it. It is my r8139 nic does not show up, after I change it to e1000, then it comes back. Thanks, this tool works great for me. Edited September 25, 2022 by Ting_sf Provide some ipdates Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #832 Posted September 25, 2022 @Kyar with qm35 it starts from 7 with i440fx from 1. Try this. Quote Link to comment Share on other sites More sharing options...
Kyar Posted September 25, 2022 Share #833 Posted September 25, 2022 il y a une heure, dodo-dk a dit : @Kyar with qm35 it starts from 7 with i440fx from 1. Try this. Perfect, now all it's good. Thanks you for your involvement Quote Link to comment Share on other sites More sharing options...
Jseinfeld Posted September 25, 2022 Share #834 Posted September 25, 2022 (edited) Thanks for this bootloader! It worked great on my J4105. Using alpha 11 with the 920+ config, with default settings. Edited September 25, 2022 by Jseinfeld Quote Link to comment Share on other sites More sharing options...
Green Posted September 25, 2022 Share #835 Posted September 25, 2022 (edited) On 9/23/2022 at 8:43 AM, fbelavenuto said: I'm working on it, for now you can SSH login to DSM (need to enable it in control panel) and use "arpl-reboot.sh config" command Huh ? Could someone expand upon this please Edited September 25, 2022 by Green Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #836 Posted September 25, 2022 @Green wget https://raw.githubusercontent.com/fbelavenuto/arpl/main/files/board/arpl/overlayfs/usr/sbin/arpl-reboot.sh sudo arpl-reboot.sh config Quote Link to comment Share on other sites More sharing options...
Green Posted September 25, 2022 Share #837 Posted September 25, 2022 What am I missing ? Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #838 Posted September 25, 2022 Your Synology User does not have write permission on that folder. You need to "cd" to a folder with permission (e.g. /volume1/homes/...) or use the sudo for the wget command too. sudo wget https://raw.githubusercontent.com/fbelavenuto/arpl/main/files/board/arpl/overlayfs/usr/sbin/arpl-reboot.sh sudo arpl-reboot.sh config Quote Link to comment Share on other sites More sharing options...
Green Posted September 25, 2022 Share #839 Posted September 25, 2022 (edited) ?, is this correct or am I missing something that I am to do next ? Edited September 25, 2022 by Green Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #840 Posted September 25, 2022 ok, now it has saved the file. now execute with sudo arpl-reboot.sh config Quote Link to comment Share on other sites More sharing options...
Green Posted September 25, 2022 Share #841 Posted September 25, 2022 Nothing Happened Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #842 Posted September 25, 2022 can you see the file (arpl-reboot.sh) if you send the command ls -l Quote Link to comment Share on other sites More sharing options...
mmkt Posted September 25, 2022 Share #843 Posted September 25, 2022 maybe you have to make it executable: sudo chmod +x arpl-reboot.sh and than try again: sudo ./arpl-reboot.sh config Quote Link to comment Share on other sites More sharing options...
Green Posted September 25, 2022 Share #844 Posted September 25, 2022 Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #845 Posted September 25, 2022 yes, do what mmkt has write. Quote Link to comment Share on other sites More sharing options...
Green Posted September 25, 2022 Share #846 Posted September 25, 2022 (edited) Edited September 25, 2022 by Green Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #847 Posted September 25, 2022 9 minutes ago, mmkt said: maybe you have to make it executable: sudo chmod +x arpl-reboot.sh and than try again: sudo ./arpl-reboot.sh config Quote Link to comment Share on other sites More sharing options...
mmkt Posted September 25, 2022 Share #848 Posted September 25, 2022 (edited) #843 😉 or this way ... Edited September 25, 2022 by mmkt Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted September 25, 2022 Share #849 Posted September 25, 2022 @Green Probably the loader you have is too old. With the new loader the arpl-reboot.sh is included. Not needed for download. You need to manually Update to the new loader, than it should work. Reboot your system, ob boot in grub select Configure Loader. Now can Upgrade to the new loader. Quote Link to comment Share on other sites More sharing options...
Green Posted September 25, 2022 Share #850 Posted September 25, 2022 Thank You to dodo-dk & mmkt & apriliars3 I really did not want to move the NAS to plug in a screen/keyboard/mouse etc But in the end I did as apriliars3 post at < HERE > showed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.