Jump to content
XPEnology Community
  • 0

No booting kernel after build


Argon

Question

Hi. I hope you are well
I am new here.
I have the following problem, I am trying to install DSM 7.1 with this tutorial. https://xpenology.com/forum/topic/62221-tutorial-installmigrate-to-dsm-7x-with-tinycore-redpill-tcrp-loader/

 

My hardware

Intel i5 10400

Motherboard Asus Prime B560M-A

Ram 8GB DDR4 2400mhz

 

The steps I perform are the following.

./rploader.sh update
./rploader.sh fullupgrade
./rploader.sh identifyusb
Found Flash USB SerialNumber: 372723590A41921771689
Vendor ID : 0x1609 Product ID : 0x3a04
Should i update the user_config.json with these values ? [Yy/Nn]y

./rploader.sh satamap
Found "00:17.0 Intel Corporation Device 43d2 (rev 11)"
Detected 6 ports/1 drives. Override # of ports or ENTER to accept <6> 
Computed settings:
SataPortMap=6
DiskIdxMap=00
Should i update the user_config.json with these values ? [Yy/Nn] y
Done.

./rploader.sh serialgen DS918+ realmac
Serial Number for Model : 1780PDN000122
Mac Address for Model DS918+ : 00:11:32:53:B9:4E 
Real Mac Address : 7C:10:C9:43:16:64
Notice : realmac option is requested, real mac will be used
Should i update the user_config.json with these values ? [Yy/Nn]y

./rploader.sh build apollolake-7.1.0-42661
exitcheck.sh reboot

 

And then it remains like this:

 

image.thumb.jpeg.3b6f416e964a03bded0d2bfdca640d4a.jpeg

 

The only thing I find is the following that is possibly the problem.

 

It looks that you will need the following modules : 

Found VGA Controller : pciid 8086d00009bc8  Required Extension : 
No matching extension
Found SATA Controller : pciid 8086d000043d2  Required Extension : 
No matching extension
Found Ethernet Interface : pciid 8086d000015fa Required Extension : 
No matching extension

 

If you need any other information, ask me for it, it will be provided.

 

Note: I am using a translator, sorry.

 

Thank you!!

Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 0

Hello, I solved my problem. Apparently it had no network with Intel Ethernet I219-V.

My solution was, since I don't have much experience. It was adding another network Realtek r8168 +  extension.

And it's working

 

image.thumb.jpeg.90d285da8a4bc71cb9fa69177a3e79d4.jpeg

 

 

Thanks!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...