Hey everyone! I actually got my Xpenology fully booted thanks to this virtualization guide and this general install guide, but neither provided me enough details to get my raid card active. To begin, here are my specs:
VM or BareMetal : VM - ESXi 6.7U3
Hardware (Motherboard/CPU) : Gigabyte M370M DS3H / Intel 8400
Storage-Controller: 1x LSI SAS 9211-8i (HBA in IT mode)
Hot Plug/Hot Swap Applied : Yes
version of rploader.sh : 0.8.0.3
Platform (DS3622xsp/DS918+/DS920+/DVA322
Thanks @flyride. Just to remove any other potential errors from the equation, I recreated the machine once again. I used all the commands above, with the addition of the mpt3sas driver:
./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json
and then also used the following command to adjust the DiskIdxMap=1000
vi user_config.json
Now it works! Seriously big thanks. I was ready to ins