mitzone Posted June 24, 2022 Share #26 Posted June 24, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.0-42661 U1 - Loader version and model: Tinycore-Redpill 0.8.0.3 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Micro GEN8 with LSI RAID ADAPTER - Additional notes: After manually installed .pat update from GUI,booted into TCRP and run: ./rploader.sh update sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661 exitcheck.sh reboot Quote Link to comment Share on other sites More sharing options...
SuperJack Posted June 26, 2022 Share #27 Posted June 26, 2022 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.0-42661 Update 2 - Loader version and model: Tinycore-Redpill 0.8.0.3 - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE ProLiant MicroServer Gen10 Plus - Additional comments: booted into TCRP and run: ./rploader.sh update sudo ./rploader.sh postupdate broadwell-7.1.0-42661 exitcheck.sh reboot Quote Link to comment Share on other sites More sharing options...
blackmix Posted June 26, 2022 Share #28 Posted June 26, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.0-42661 Update 2 - Loader version and model: Tinycore-Redpill 0.8.0.3 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Machinist mr9a - Xeon E5 2690v3 12/24 - 32gb RAM ECC - Additional comments: 1: update manual on DSM dashboard for syno version update and wait reboot 2: boot into TCRP and run -> sudo ./rploader.sh postupdate broadwell-7.1.0-42661 exitcheck.sh reboot 1 Quote Link to comment Share on other sites More sharing options...
Polyphemus Posted June 28, 2022 Share #29 Posted June 28, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.0-42661 Update 1 - Loader version and model: Tinycore-Redpill v0.8.0.1 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE MicroServer Gen8 - step 1: Upgraded to DSM 7.1.0-42661u2 via GUI - After Step 1 update, booted into TCRP and run: ./rploader.sh update sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661 exitcheck.sh reboot Quote Link to comment Share on other sites More sharing options...
pigr8 Posted June 29, 2022 Share #30 Posted June 29, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 3 - Loader version and model: Tinycore-Redpill v0.9.0.2 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: VMware ESXi 7.0 update 3 @ HPE Microserver Gen8 - Additional comments: Upgraded from older synoboot loader, VM has a Dell H200 (flashed as LSI in IT mode) in passthough. After the update, on first reboot to avoid recovery mode loop, just boot in TC and run update/postupdate, it will detect the new freshly patch, then reboot normally in dsm. Quote Link to comment Share on other sites More sharing options...
kekesed97 Posted June 30, 2022 Share #31 Posted June 30, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1-42661-1 - Loader version and model: TCRP 0.8.0.0 DVA3221 - Using custom extra.lzma: NO - Installation type: BAREMETAL – QNAP TS-469 Pro Quote Link to comment Share on other sites More sharing options...
trublu Posted July 2, 2022 Share #32 Posted July 2, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1-42661 Update 2 - Loader version and model: Automated redpill loader - Using custom extra.lzma: NO - Installation type: BAREMETAL, X10SDV-TLN4F Quote Link to comment Share on other sites More sharing options...
ilyas Posted August 10, 2022 Share #33 Posted August 10, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.0-42661 Update 2 - Loader version and model: Tinycore-Redpill 0.8.0.3 - DS3622xs+ (tinycore-redpill-uefi.v0.8.0.0.img.gz) - Using custom extra.lzma: NO - Installation type: BAREMETAL - MACHINIST X99 Motherboard LGA 2011-3/ Intel Xeon E5 2673 V3/ 16GB (2*8GB) DDR4 (non ECC) 2666MHz RAM - Additional comments: From DSM Control Panel> Update & Restore>Manual DSM Update and wait for reboot in TCRP. Then run: ./rploader.sh update sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661 exitcheck.sh reboot Quote Link to comment Share on other sites More sharing options...
agarin Posted August 18, 2022 Share #34 Posted August 18, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1-42661-1 - Loader version and model: Tinycore-Redpill 0.9.0.2 DS918+ 7.1-42661-2 - Installation type: Baremetal Asrock J3455m - Additional comments: ./rploader.sh postupdate apollolake-7.1.0-42661 exitcheck.sh reboot Quote Link to comment Share on other sites More sharing options...
Ting_sf Posted September 28, 2022 Share #35 Posted September 28, 2022 - Outcome of the update: FAILED - DSM version prior update: NO - Loader version and model: Tinycore-Redpill - DS3617xs-7.1-42661 - Using custom extra.lzma: NO - Installation type: PROXMOX VM - Additional comments: 1. I was trying to update from 7.1-42661 update 1 to update 2 2. after I manual install update 2 through GUI, then boot into TCRP and run: ./rploader.sh update ./rploader.sh postupdate myplateform but I have following error message: Spoiler ln: failed to create symbolic link '/home/tc/custom-module/auxfiles': Operation not permitted Rploader Version : 0.7.0.5 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/jimmyGALLAND/redpill-lkm.git : Redpill module branch : develop Extensions : redpill-misc Extensions URL : "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json" TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwell-7.0.dev.txz/download TOOLKIT_SHA : e050987fbbab0c246aff2af935b1d8a4140ce490915aa4c92f3c8d163eea970c SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/broadwell-source/linux-3.10.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwell TARGET_VERSION : 7.1.0 TARGET_REVISION : 42661 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds3617xs_42661 MODEL : DS3617xs Local Cache Folder : /mnt/sda3/auxfiles Checking Internet Access -> OK Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest remote: Enumerating objects: 982, done. remote: Counting objects: 100% (430/430), done. remote: Compressing objects: 100% (104/104), done. remote: Total 982 (delta 339), reused 413 (delta 323), pack-reused 552 Receiving objects: 100% (982/982), 89.47 MiB | 26.51 MiB/s, done. Resolving deltas: 100% (519/519), completed with 37 local objects. From https://github.com/pocopico/redpill-load 28c5753..bd731d6 develop -> origin/develop * [new branch] jun -> origin/jun a20ec37..e8d37bd master -> origin/master Updating 28c5753..bd731d6 error: Your local changes to the following files would be overwritten by merge: config/DS3617xs/7.1.0-42661/config.json Please commit your changes or stash them before you merge. Aborting Removing any old redpill.ko modules Looking for redpill for : ds3617xs_42661 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus-broadwell.tgz Extracting module Mounting root to get the latest dsmroot patch in /.syno/patch mount: /mnt/dsmroot: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error. Failed to mount Failed to mount DSM root, cannot continue the postupdate process, returning and xpenology goes to boot loop because postupdate did not get finish. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.