Peter Suh Posted June 1, 2022 Share #1 Posted June 1, 2022 (edited) https://www.synology.com/en-global/releaseNote/DSM?model=DS920%2B#7_1 Spoiler Version: 7.1-42661 Update 2 (2022-06-01) Important notes 1.Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 7.1 installed can be updated to this version. - The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly. - Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version. 2.This update will restart your Synology NAS. Compatibility & Installation 1.When an SSD's firmware version doesn't support the S.M.A.R.T test, the system will disable related functions. Fixed Issues 1.Fixed an issue where the out-of-band port couldn't function properly when users configured Link Aggregation with only the ports on the external network card. Edited June 1, 2022 by Polanskiman Please use global link. Quote Link to comment Share on other sites More sharing options...
piter Posted June 1, 2022 Share #2 Posted June 1, 2022 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: 7.1-42661-1 - Loader version and model: TCRP 0.8.0.0 DS3622xs+ - Using custom extra.lzma: NO - Installation type: ESXi 6.7.0 Update 3 (Build 16713306) VM on Xeon(R) CPU E5-2650 v3 - Additional comments: Recovery loop Quote Link to comment Share on other sites More sharing options...
Amrit86 Posted June 1, 2022 Share #3 Posted June 1, 2022 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: 7.1-42661-1 - Loader version and model: TCRP 0.4.6 DS3622xs+ - Using custom extra.lzma: NO - Installation type: Baremetal - Additional comments: Recovery loop Quote Link to comment Share on other sites More sharing options...
dolbycat Posted June 1, 2022 Share #4 Posted June 1, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1-42661-1 - Loader version and model: Jumkey-Redpill DS3622xs+ 7.1-42661-2 - Using custom extra.lzma: NO - Installation type: Baremetal - Additional comments: I used tossp's tool-chain ( https://github.com/tossp/redpill-tool-chain ) Quote Link to comment Share on other sites More sharing options...
D.S Posted June 2, 2022 Share #5 Posted June 2, 2022 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1-42661-1 - Loader version and model: Jumkey-Redpill DS918+ 7.1-42661-2 - Using custom extra.lzma: NO - Installation type: Baremetal - Additional comments: Edited June 2, 2022 by flyride edit loader for clarity Quote Link to comment Share on other sites More sharing options...
use-nas Posted June 2, 2022 Share #6 Posted June 2, 2022 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1-42661-1 - Loader version and model: Jumkey-Redpill DS920+ 7.1-42661-2 - Installation type: Baremetal J3455 ITX - Additional comments: tossp's tool-chain Edited June 2, 2022 by flyride edit loader for clarity Quote Link to comment Share on other sites More sharing options...
freddyemmer Posted June 2, 2022 Share #7 Posted June 2, 2022 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: 7.1-42661-1 - Loader version and model: Tinycore-Redpill v0.8 - DS918+ - Installation type: Baremetal AsRock Q1900-ITX - Additional comments: Recovery loop And also - Outcome of the update: UNSUCCESSFUL - DSM version prior update: 7.1-42661 - Loader version and model: Tinycore-Redpill v0.8 - DS920+ - Installation type: 6.7.0 Update 3 (Build 17700523) - Additional comments: Recovery loop Quote Link to comment Share on other sites More sharing options...
Thesevenn Posted June 3, 2022 Share #8 Posted June 3, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1-42661 - Loader version and model:Tinycore-Redpill v0.8 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: VMware ESXi 7.0 update 3 - Additional comments: After update, booted into TCRP and: ./rploader.sh update ./rploader.sh postupdate <yourplatform> 4 1 Quote Link to comment Share on other sites More sharing options...
BrandonS Posted June 3, 2022 Share #9 Posted June 3, 2022 (edited) - Outcome of the update: UNSUCCESSFUL - DSM version prior update: 7.1-742661 - Loader version and model: Tinycore-Redpill v0.4.6 - DS3622xs+ - Installation type: ESXI 6.7U3 (Dual E5-2690) w/ RAID 10 on pass-thru HBA - Additional Comments: Running pass-thru NIC in Static Link Aggregate mode (XOR in DSM); Device was unreachable via LAN after reboot from first 10min countdown; the update targets an update for Link Aggregation - Outcome of the update: UNSUCCESSFUL - DSM version prior update: 7.1-742661 - Loader version and model: Tinycore-Redpill v0.4.6 - DS3622xs+ - Installation type: ESXI 6.7U3 (HP T730+) w/ VMSK on USB Harddrive - Additional Comments: Recovery Loop Edited June 3, 2022 by BrandonS Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 3, 2022 Share #10 Posted June 3, 2022 2 posts deleted. Reminder. Read this: Quote Link to comment Share on other sites More sharing options...
gorski Posted June 5, 2022 Share #11 Posted June 5, 2022 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1-42661-1 - Loader version and model: Tinycore-Redpill v0.9 - DS3617xs - Installation type: Baremetal - Additional comments: don't forget to run after update tcrp and do ./rploader.sh postupdate <yourplatform> else you go to recovery loop Edited June 5, 2022 by gorski Quote Link to comment Share on other sites More sharing options...
MusaedQ8 Posted June 6, 2022 Share #12 Posted June 6, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1-42661 - Loader version and model:Tinycore-Redpill v0.8 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: VMware ESXi 7.0 update 3 - Additional comments: After update, booted into TCRP and: ./rploader.sh update ./rploader.sh postupdate <yourplatform> Quote Link to comment Share on other sites More sharing options...
Balrog Posted June 6, 2022 Share #13 Posted June 6, 2022 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 3 - Loader version and model: Tinycore-Redpill v0.8 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: VMware ESXi 7.0 update 3 - Additional comments: I upgraded one of my backup NAS with a flashed Dell H200 HBA succesfully in 2 steps - step 1: from DSM 6.2.3-25426 Update 3 to DSM 7.1.0-42661 (like described in the tutorial "Tutorial: Install/Migrate to DSM 7.x with TinyCore RedPill (TCRP) Loader") - step 2: Upgraded to DSM 7.1.0-42661u2 via GUI - After Step 2 update, booted into TCRP and run: ./rploader.sh update sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661 exitcheck.sh reboot Edited June 6, 2022 by Balrog 1 Quote Link to comment Share on other sites More sharing options...
Tong6998 Posted June 8, 2022 Share #14 Posted June 8, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 3 - Loader version and model: Tinycore-Redpill v0.8 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock C2750D4I - Additional comments: Followed Balrog's example to the "T" - step 1: from DSM 6.2.3-25426 Update 3 to DSM 7.1.0-42661 (like described in the tutorial "Tutorial: Install/Migrate to DSM 7.x with TinyCore RedPill (TCRP) Loader") - step 2: Upgraded to DSM 7.1.0-42661u2 via GUI - After Step 2 update, booted into TCRP and run: ./rploader.sh update sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661 exitcheck.sh reboot Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted June 12, 2022 Author Share #15 Posted June 12, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.0.1-42218-U4 - Loader version and model: Tinycore-Redpill v0.8 - DS920+ - Using custom extra.lzma: NO - Installation type: Baremetal, Intel Core i3-3220T - Additional comments: with jumkey's QuickJs dynamic dtb ext / jun mode / Modified custom_config_jun.json I used m shell ( ./my.sh DS920+J jumkey ) Quote Link to comment Share on other sites More sharing options...
Worapon1999 Posted June 12, 2022 Share #16 Posted June 12, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1-42661 Update 1 - Loader version and model: Tinycore-Redpill v0.8.0.2 - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL, W-NVR3 J1900 - Additional comments: After update, booted into TCRP and: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh postupdate <yourplatform> exitcheck.sh reboot Quote Link to comment Share on other sites More sharing options...
DsMan Posted June 12, 2022 Share #17 Posted June 12, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1.0-42661-1 - Loader version and model: Tinycore-Redpill v0.8.0.2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Additional comments: Update via DSM GUI to 7.1.0-42661-2. After update, booted into TCRP and executed: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh backup ./rploader.sh postupdate apollolake-7.1.0-42661 exitcheck.sh reboot Transcoding: cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["hevc_dec","ac3_dec","h264_dec","h264_enc","aac_dec","aac_enc","mpeg4part2_dec","vc1_dec","vc1_enc"],"token":"1234567XXXXXXXXabc"} flyride...Thanks a lot. 1 Quote Link to comment Share on other sites More sharing options...
vlad04 Posted June 13, 2022 Share #18 Posted June 13, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: 7.0.1-42218-3 - Loader version and model: Tinycore-Redpill v0.8.0.3 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Additional comments: Update via DSM GUI to 7.1.0-42661-2. After update, booted into TCRP and executed: ./rploader.sh postupdate apollolake-7.1.0-42661 exitcheck.sh reboot Quote Link to comment Share on other sites More sharing options...
LeeCox Posted June 13, 2022 Share #19 Posted June 13, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.0-42661 Update 1 - Loader version and model: Tinycore-Redpill v0.8.0.1 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE MicroServer Gen10 Plus - step 1: Upgraded to DSM 7.1.0-42661u2 via GUI - After Step 1 update, booted into TCRP and run: ./rploader.sh update sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661 exitcheck.sh reboot 1 Quote Link to comment Share on other sites More sharing options...
crurer Posted June 19, 2022 Share #20 Posted June 19, 2022 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.0-42661 Update 1 - Loader version and model: Tinycore-Redpill v0.8 - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - 2x Fujitsu Server TX1330 M1 8x1TB 2,5" WD RED (iSCSI Target for Server 2022 Hyper-V host) QLE3442-RJ (10GBit cluster IP + Heartbeat) - crossflashed D2607-A21 to LSI 9211-8i IT mode - Upgraded to DSM 7.1.0-42661u2 via GUI - booted into TCRP and run: ./rploader.sh update sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661 exitcheck.sh reboot Edited June 19, 2022 by crurer hw specs updated Quote Link to comment Share on other sites More sharing options...
sliders Posted June 23, 2022 Share #21 Posted June 23, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1-42661 Update 2 - Loader version and model: Tinycore-Redpill v0.8 - DS920+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP ProDesk 400 G4 -Ram 16Go - Additional comments: I used m shell ( DS920+J jumkey ). Upgraded to DSM 7.1.0-42661 Update2 via Pat file Quote Link to comment Share on other sites More sharing options...
Stefano Posted June 23, 2022 Share #22 Posted June 23, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.0-42661 - Loader version and model: Tinycore-Redpill 0.8.0.3 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N40L - Additional comments: Migrated from DS3615xs to DS3622xs+ After manually installed .pat update from GUI,booted into TCRP and run: ./rploader.sh update sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661 exitcheck.sh reboot 1 Quote Link to comment Share on other sites More sharing options...
nk950357 Posted June 23, 2022 Share #23 Posted June 23, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.0-42661 Update 1 - Loader version and model: Tinycore-Redpill v0.8.0.3 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - intel i3-8100T/ASUS PRIME B360M-A - Additional comments: Remember to reboot into TCRP, run: ./rploader.sh update sudo ./rploader.sh postupdate apollolake-7.1.0-42661 exitcheck.sh reboot otherwise system will keep boot to recoverable mode. Also, NVME patch will fail after updating, remember to re-patch it. Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted June 23, 2022 Share #24 Posted June 23, 2022 - Outcome of the update: SUCCESSFUL - DSM version prior update: NO - Loader version and model: Tinycore-Redpill v0.8.0.2 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE MicroServer Gen8 1.- Download and burn image tinycore redpill v0.9.0.2 to microsd with Balena Etcher. 2.- Booted into TCRP and run with Putty (tc:P@ssw0rd): ./rploader.sh update now ./rploader.sh fullupgrade now wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/myv.sh.gz; tar -zxvf myv.sh.gz; chmod +x myv.sh ./myv.sh DS3622xs+J jumkey manual (Install extension 58 - tg3.ko for NÏC Realtek) exitcheck.sh reboot Quote Link to comment Share on other sites More sharing options...
MichelD Posted June 24, 2022 Share #25 Posted June 24, 2022 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.0.1-42218-Update3 - Loader version and model: TCRP 0.8.0.3 DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL – Celeron G4900; Asrock H310M-HDV; 4GB DDR4, 3 disks, onboard NIC RTL8111H - Additional comments: Step 1 Burned an empty USB thumbdrive with TCRP 0.8.0.0 Booted into tinycore sudo -i ./rploader.sh update now ./rploader.sh serialgen DS918+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build apollolake-7.0.1-42218 reboot Step 2 Booted into tinycore sudo -i wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz; tar -zxvf my.sh.gz; ./my.sh DS918+ reboot Findsynology: upgraded to DSM 7.0.1-42661-Update1 (downloaded .pat from synology.com) Step 3 Installed DSM 7.1.0-42661-Update2 from the GUI (downloaded .pat from synology.com) Booted into tinycore: sudo -i ./rploader.sh update ./rploader.sh postupdate apollolake-7.1.0-42661 exitcheck.sh reboot Edited June 24, 2022 by MichelD 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.