Jump to content
XPEnology Community

DSM 7.1-42661 Update 2


Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Recommended Posts

1836767909_2022-06-0111_38_33.thumb.png.58d1e0fc1b3de15ba01ff0e23d859da3.png

 

https://www.synology.com/en-global/releaseNote/DSM?model=DS920%2B#7_1

 

Spoiler

Version: 7.1-42661 Update 2

(2022-06-01)

 

Important notes

   1.Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 7.1 installed can be updated to this version.

        - The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

        - Your DSM is working fine without having to update. The system evaluates service statuses and system settings to determine whether it needs to update to this version.

   2.This update will restart your Synology NAS.

 

Compatibility & Installation

   1.When an SSD's firmware version doesn't support the S.M.A.R.T test, the system will disable related functions.

 

Fixed Issues

   1.Fixed an issue where the out-of-band port couldn't function properly when users configured Link Aggregation with only the ports on the external network card.

 

Edited by Polanskiman
Please use global link.
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: 7.1-42661-1

- Loader version and model: TCRP 0.8.0.0 DS3622xs+

- Using custom extra.lzma: NO

- Installation type: ESXi 6.7.0 Update 3 (Build 16713306) VM on Xeon(R) CPU E5-2650 v3

- Additional comments: Recovery loop

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: 7.1-42661-1

- Loader version and model: TCRP 0.4.6 DS3622xs+

- Using custom extra.lzma: NO

- Installation type: Baremetal

- Additional comments: Recovery loop

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.1-42661-1

- Loader version and model: Jumkey-Redpill  DS3622xs+ 7.1-42661-2

- Using custom extra.lzma: NO

- Installation type: Baremetal

- Additional comments: 

 

I used tossp's tool-chain ( https://github.com/tossp/redpill-tool-chain )

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.1-42661-1

- Loader version and model: Jumkey-Redpill  DS918+ 7.1-42661-2

- Using custom extra.lzma: NO

- Installation type: Baremetal

- Additional comments: 

Edited by flyride
edit loader for clarity
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.1-42661-1

- Loader version and model: Jumkey-Redpill  DS920+ 7.1-42661-2

- Installation type: Baremetal J3455 ITX

- Additional comments: tossp's tool-chain

Edited by flyride
edit loader for clarity
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: 7.1-42661-1

- Loader version and model: Tinycore-Redpill v0.8 - DS918+

- Installation type: Baremetal AsRock Q1900-ITX

- Additional comments: Recovery loop

 

And also 

 

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: 7.1-42661

- Loader version and model: Tinycore-Redpill v0.8 - DS920+

- Installation type: 6.7.0 Update 3 (Build 17700523)

- Additional comments: Recovery loop

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.1-42661

- Loader version and model:Tinycore-Redpill v0.8 - DS3622xs+

- Using custom extra.lzma: NO

- Installation type: VMware ESXi 7.0 update 3

- Additional comments: After update, booted into TCRP and:

./rploader.sh update 

./rploader.sh postupdate <yourplatform>

  • Like 4
  • Thanks 1
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: 7.1-742661

- Loader version and model: Tinycore-Redpill v0.4.6 - DS3622xs+

- Installation type: ESXI 6.7U3 (Dual E5-2690) w/ RAID 10 on pass-thru HBA  

- Additional Comments: Running pass-thru NIC in Static Link Aggregate mode (XOR in DSM); Device was unreachable via LAN after reboot from first 10min countdown; the update targets an update for Link Aggregation

 

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: 7.1-742661

- Loader version and model: Tinycore-Redpill v0.4.6 - DS3622xs+

- Installation type: ESXI 6.7U3 (HP T730+) w/ VMSK on USB Harddrive

- Additional Comments: Recovery Loop

Edited by BrandonS
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.1-42661-1

- Loader version and model: Tinycore-Redpill v0.9 - DS3617xs

- Installation type: Baremetal

- Additional comments: don't forget to run after update tcrp and

do ./rploader.sh postupdate <yourplatform> else you go to recovery loop  

Edited by gorski
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.1-42661

- Loader version and model:Tinycore-Redpill v0.8 - DS3622xs+

- Using custom extra.lzma: NO

- Installation type: VMware ESXi 7.0 update 3

- Additional comments: After update, booted into TCRP and:

./rploader.sh update

./rploader.sh postupdate <yourplatform>

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3
- Loader version and model: Tinycore-Redpill v0.8 - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: VMware ESXi 7.0 update 3
- Additional comments: I upgraded one of my backup NAS with a flashed Dell H200 HBA succesfully in 2 steps

  - step 1: from DSM 6.2.3-25426 Update 3 to DSM 7.1.0-42661 (like described in the tutorial "Tutorial: Install/Migrate to DSM 7.x with TinyCore RedPill (TCRP) Loader")

  - step 2: Upgraded to DSM 7.1.0-42661u2 via GUI

    - After Step 2 update, booted into TCRP and run:

 

./rploader.sh update
sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661
exitcheck.sh reboot

 

Edited by Balrog
  • Thanks 1
Link to comment
Share on other sites

 - Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.3-25426 Update 3
- Loader version and model: Tinycore-Redpill v0.8 - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - ASRock C2750D4I
- Additional comments: Followed Balrog's example to the "T"

  - step 1: from DSM 6.2.3-25426 Update 3 to DSM 7.1.0-42661 (like described in the tutorial "Tutorial: Install/Migrate to DSM 7.x with TinyCore RedPill (TCRP) Loader")

  - step 2: Upgraded to DSM 7.1.0-42661u2 via GUI

    - After Step 2 update, booted into TCRP and run:

 

./rploader.sh update
sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661
exitcheck.sh reboot

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.0.1-42218-U4

- Loader version and model: Tinycore-Redpill v0.8 - DS920+

- Using custom extra.lzma: NO

- Installation type: Baremetal, Intel Core i3-3220T

- Additional comments: with jumkey's QuickJs dynamic dtb ext / jun mode / Modified custom_config_jun.json

I used m shell ( ./my.sh DS920+J jumkey )

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.1-42661 Update 1

- Loader version and model: Tinycore-Redpill v0.8.0.2 - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL, W-NVR3 J1900

- Additional comments: After update, booted into TCRP and:

./rploader.sh update
./rploader.sh fullupgrade
./rploader.sh postupdate <yourplatform>
exitcheck.sh reboot

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.1.0-42661-1

- Loader version and model: Tinycore-Redpill v0.8.0.2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL

- Additional comments: Update via DSM GUI to 7.1.0-42661-2. After update, booted into TCRP and executed:

./rploader.sh update
./rploader.sh fullupgrade
./rploader.sh backup
./rploader.sh postupdate apollolake-7.1.0-42661
exitcheck.sh reboot

 

Transcoding:

cat /usr/syno/etc/codec/activation.conf
{"success":true,"activated_codec":["hevc_dec","ac3_dec","h264_dec","h264_enc","aac_dec","aac_enc","mpeg4part2_dec","vc1_dec","vc1_enc"],"token":"1234567XXXXXXXXabc"}

 

flyride...Thanks a lot.

  • Thanks 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.0.1-42218-3

- Loader version and model: Tinycore-Redpill v0.8.0.3 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL

- Additional comments: Update via DSM GUI to 7.1.0-42661-2. After update, booted into TCRP and executed:

./rploader.sh postupdate apollolake-7.1.0-42661
exitcheck.sh reboot

 

Link to comment
Share on other sites

 - Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.0-42661 Update 1
- Loader version and model: Tinycore-Redpill v0.8.0.1 - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HPE MicroServer Gen10 Plus

    - step 1: Upgraded to DSM 7.1.0-42661u2 via GUI

    - After Step 1 update, booted into TCRP and run:

./rploader.sh update
sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661
exitcheck.sh reboot

 

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.0-42661 Update 1
- Loader version and model: Tinycore-Redpill v0.8 - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - 2x Fujitsu Server TX1330 M1 8x1TB 2,5" WD RED (iSCSI Target for Server 2022 Hyper-V host) QLE3442-RJ (10GBit cluster IP + Heartbeat) - crossflashed D2607-A21 to LSI 9211-8i IT mode

- Upgraded to DSM 7.1.0-42661u2 via GUI

 

DS3615xs_DSM7_cluster_nas_01.jpg

 

 

DS3615xs_DSM7_cluster_nas_02.jpg

 

 

DS3615xs_DSM7_cluster_nas_03.jpg

 

 

DS3615xs_DSM7_cluster_nas_04.jpg

- booted into TCRP and run:

 

./rploader.sh update
sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661
exitcheck.sh reboot
Edited by crurer
hw specs updated
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661 Update 2
- Loader version and model: Tinycore-Redpill v0.8 - DS920+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP ProDesk 400 G4 -Ram 16Go
- Additional comments: I used m shell ( DS920+J jumkey ). Upgraded to DSM 7.1.0-42661 Update2 via Pat file

 

 

002.png

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.0-42661

- Loader version and model: Tinycore-Redpill 0.8.0.3 - DS3622xs+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N40L

- Additional comments: Migrated from DS3615xs to DS3622xs+

  After manually installed .pat update from GUI,booted into TCRP and run:

./rploader.sh update
sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661
exitcheck.sh reboot
  • Thanks 1
Link to comment
Share on other sites

 - Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.0-42661 Update 1
- Loader version and model: Tinycore-Redpill v0.8.0.3 - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - intel i3-8100T/ASUS PRIME B360M-A

- Additional comments: Remember to reboot into TCRP, run:

./rploader.sh update
sudo ./rploader.sh postupdate apollolake-7.1.0-42661
exitcheck.sh reboot

otherwise system will keep boot to recoverable mode.

Also, NVME patch will fail after updating, remember to re-patch it.

Link to comment
Share on other sites

 - Outcome of the update: SUCCESSFUL

- DSM version prior update: NO
- Loader version and model: Tinycore-Redpill v0.8.0.2 - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HPE MicroServer Gen8 

    1.- Download and burn image tinycore redpill v0.9.0.2 to microsd with Balena Etcher.

    2.- Booted into TCRP and run with Putty (tc:P@ssw0rd):

./rploader.sh update now
./rploader.sh fullupgrade now
wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/myv.sh.gz; tar -zxvf myv.sh.gz;
chmod +x myv.sh
./myv.sh DS3622xs+J jumkey manual

 

(Install extension 58 - tg3.ko for NÏC Realtek)

 

exitcheck.sh reboot
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.0.1-42218-Update3
- Loader version and model: TCRP 0.8.0.3 DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL – Celeron G4900; Asrock H310M-HDV; 4GB DDR4, 3 disks, onboard NIC RTL8111H
- Additional comments:
Step 1
Burned an empty USB thumbdrive with TCRP 0.8.0.0
Booted into tinycore
sudo -i
./rploader.sh update now
./rploader.sh serialgen DS918+
./rploader.sh identifyusb now
./rploader.sh satamap now
./rploader.sh build apollolake-7.0.1-42218
reboot

 

Step 2
Booted into tinycore
sudo -i
wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz; tar -zxvf my.sh.gz;
./my.sh DS918+
reboot
Findsynology: upgraded to DSM 7.0.1-42661-Update1 (downloaded .pat from synology.com)

 

Step 3
Installed DSM 7.1.0-42661-Update2 from the GUI (downloaded .pat from synology.com)
Booted into tinycore:
sudo -i
./rploader.sh update
./rploader.sh postupdate apollolake-7.1.0-42661
exitcheck.sh reboot

Edited by MichelD
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...