Jump to content
XPEnology Community

DSM 6.1.x Loader


jun

Recommended Posts

On 3/14/2018 at 11:35 AM, ericavd said:

BTW, I just order a cheap used 8-Port SATA/PCI-X Controller SATA II 3Gbps Card (with Marvell 88SX6081 Chip). Not knowing the compatibility. I will post the results when I have it.

88SX6081

https://ata.wiki.kernel.org/index.php/SATA_hardware_features

-> sata_mv.ko

 

 

all sata_*.ko  (also (sata_mv.ko) are broken in dsm 6.1 kernel source from synology, so no luck when it comes to this controller

 

there are cheap 4-port marvel controller that use the ahci diver, if it has to be 8-port then maybe this helps

 

Link to comment
Share on other sites

1 hour ago, error403 said:

Jun 1.02b seems to work fine on my old ASUS e2km1l-deluxe AMD-based machine. Are there problems to expect from running on AMD platform, or would I've hit those problem already during install if existent?

No, if you've managed to install it & everything's working you should be ok.

Link to comment
Share on other sites

  • 2 weeks later...

Just wanted to say than you for all the work being done here; I have implemented these nas setups with out fail on a couple systems.

 

But also wanted to share this info if people were interested; I have a VmWare ESXi 6.5 server running a AMD Ryzen 5 1600 cpu, and using the DS3617xs 6.1 v1.0aplha vmware images (after converting the vmware to ESXi 6.5) it booted up just fine and have had no issues; running DSM 6.1.6.

 

Here is my cpuinfo from ssh on the system:

cat /proc/cpuinfo  

 

/$ cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 23
model           : 1
model name      : AMD Ryzen 5 1600 Six-Core Processor
stepping        : 1
cpu MHz         : 3192.916
cache size      : 512 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 13
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm nopl eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw arat xsaveopt fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap
bogomips        : 6385.83
TLB size        : 2560 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 43 bits physical, 48 bits virtual
power management:
processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 23
model           : 1
model name      : AMD Ryzen 5 1600 Six-Core Processor
stepping        : 1
cpu MHz         : 3192.916
cache size      : 512 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 13
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm nopl eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw arat xsaveopt fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap
bogomips        : 6386.84
TLB size        : 2560 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 43 bits physical, 48 bits virtual
power management:

 

Hide  

 

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
3 hours ago, rikadoo said:

 

Always download manual in DSM en then i install it. I have 6 sataports on my motherboard and an M1015 SAS controller. I don`t know the exact drives that are not seen but i thought it was from my SAS card.

So it looks like you have 14 drive channels (6+8) but 12 is the default unless syno info.conf is altered but somehow it looks like your sataport edit is fixing it until update. I would check and ensure your 9 drives are connected to the first 9 channels (6 onboard and 3 sas) but you will need to determine the drive numbers/channels in DSM. If your 9 drives are on the first 9 channels seen by DSM no config changes should be needed and no rebuilds on update

Link to comment
Share on other sites

  • Polanskiman changed the title to DSM 6.1.x Loader
  • 1 month later...
10 минут назад, kaktuss77 сказал:

Hello,

 

I have a question about the 918+ and jun's 1.03a loader,

 

Is the 918+ and the jun's loader support 12disks by default? or 4? Because I have a 3617xs with 14disks mod.

 

Thanks

 

I try 4 disk setup. Its work but unstable. ISCSI work, but under big load freezes. 6.17  3617 its fine.

Link to comment
Share on other sites

Il y a 5 heures, vortexxx a dit :

 

I try 4 disk setup. Its work but unstable. ISCSI work, but under big load freezes. 6.17  3617 its fine.

 

Okay thanks for answered me. thats you describe is only with 1.03a loader or with 1.02b too?

 

I have 2 x 10Gbps port, for my iSCSI target (Windows 10, 6Tb target for games etc), I allready use ds3617xs image with 1.02b loader, work great :)

  • Thanks 1
Link to comment
Share on other sites

8 hours ago, kaktuss77 said:

I have a question about the 918+ and jun's 1.03a loader,

 

Is the 918+ and the jun's loader support 12disks by default? or 4? Because I have a 3617xs with 14disks mod.

 

yes. default is 12, i tested with one disk on port 4 and another on port 12

maxdisk is 12 anf internal disk 0xff (as in 916+) but it shows 12 disk and seems to work

  • Thanks 1
Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...

Добрый день.
Извините за мой английский, я использую google translate.
Мне нужен загрузчик v1.03b для 3617 с разделом GPT? BIOS материнской платы не поддерживает загрузку Legacy. (Asrock J5005-ITX, BIOS обновлен до 1.40) Те загрузчики, которые выложены здесь v1.03b 3617 с разделом MBR.

Edited by llxbr
Link to comment
Share on other sites

Good afternoon.
Sorry for my English, i use google translate.
I need a bootloader v1.03b for 3617 with a GPT partition? The BIOS of the motherboard does not support Legacy boot. (Asrock J5005-ITX, bios updated to 1.40 )  Those loaders that are laid out here v1.03b for 3617 with MBR partition.

Link to comment
Share on other sites

13 minutes ago, llxbr said:

Good afternoon.
Sorry for my English, i use google translate.
I need a bootloader v1.03b for 3617 with a GPT partition? The BIOS of the motherboard does not support Legacy boot. (Asrock J5005-ITX, bios updated to 1.40 )  Those loaders that are laid out here v1.03b for 3617 with MBR partition.

I have an Asrock j3455 with similar bios, works ok with mbr / non-uefi

Try Bios> Advanced> Enable Legacy USB support

 

Then try Boot> Device and see if the legacy USB appears

Link to comment
Share on other sites

  • 2 weeks later...

Help!

 

- Outcome of the installation / update: SUCCESSFUL
- DSM version: DSM 6.2-23739 Update 2
- Loader version and model: JUN'S LOADER v1.02b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: Baremetal Optiplex 9020
- Additional comments: None

Good evening, I upgraded to DSM 6.2-23739 Update 2 and did not know though, it works perfectly. with loader v.1.02b!

Now is the doubt, I put jun load 1.03b and I upgrade to DSM 6.2.1.23824 Update 2? or leave it the way it is?


************************************************** **************************************
DO NOT update to DSM 6.2 with loader v.1.02b. It will not work. I repeat. DO NOT update to DSM 6.2

 

syno.png

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...