pplatinumss Posted April 27, 2017 Share #2676 Posted April 27, 2017 Has there been a fix for the APC UPC not being detected in DSM 6.0.1 UPDATE 1 or 11 pugged in either front or back. It was working fine in 5.2 with a HP N54L, plugged in the back usb ports. UPDATE - Back-UPS ES 500 and Back-UPS ES 350 are on the Syno compatibility list, however Back-UPS ES 700 is not Quote Link to comment Share on other sites More sharing options...
Salah Posted April 28, 2017 Share #2677 Posted April 28, 2017 Polanskiman said: @jun WARNING I was able to install 6.1.1 with v1.02a2 on VBOX. This was a fresh install with 6.1.1. I also tried doing an upgrade to 6.1.1 from 6.1 but that didn't seem to work so well. I tried several times. I wasn't able to access the GUI and there was no network activity. I did notice some unusual logs though. Those Hunk # signify that the patch needs to be updated for 6.1.1: patching file etc/rc Hunk #1 succeeded at 169 (offset 6 lines). patching file etc/synoinfo.conf Hunk #1 succeeded at 280 (offset 4 lines). patching file linuxrc.syno Hunk #1 succeeded at 38 (offset 1 line). Hunk #2 succeeded at 117 with fuzz 2 (offset 1 line). Hunk #3 succeeded at 397 (offset 13 lines). or [ 151.364970] md1: Failed to send sync event: (sync type: resync, finish: 0, interrupt: 0) A hard reset did not solve the issue obviously. The advice to everyone is to NOT update to 6.1.1. Even doing a fresh install with 6.1.1 is not advisable. This needs to be addressed by Jun first. That's why I run VDSM:) Updating one now Quote Link to comment Share on other sites More sharing options...
Salah Posted April 28, 2017 Share #2678 Posted April 28, 2017 Works like it should Quote Link to comment Share on other sites More sharing options...
hellbondz Posted April 28, 2017 Share #2679 Posted April 28, 2017 Hi. Simple question. Has enyone tried 6.1.1 update on DS3615xs loader? Quote Link to comment Share on other sites More sharing options...
KenF Posted April 28, 2017 Share #2680 Posted April 28, 2017 Has there been a fix for the APC UPC not being detected in DSM 6.0.1 UPDATE 1 or 11 pugged in either front or back. It was working fine in 5.2 with a HP N54L, plugged in the back usb ports. UPDATE - Back-UPS ES 500 and Back-UPS ES 350 are on the Syno compatibility list, however Back-UPS ES 700 is not Yes there is a fix. The issue is down to the current build not having USB 1.1 Compatibility (APC USB for mine is 1.1 probably the same for all early ones, mines a Smart UPS 750). The fix is to install a USB 3.0 card in the N54L, that acts as a hub and lets DSM see it correctly. Got mine from Amazon.co.uk here: https://www.amazon.co.uk/gp/product/B01C86K4IG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 DSM 6 now sees it correctly. Quote Link to comment Share on other sites More sharing options...
Ton1512 Posted April 28, 2017 Share #2681 Posted April 28, 2017 Hello, I have a question: Is it possible to install DSM 6.x in VirtualBox running under windows 10, like it was possible with DSM 5.2? If so, is there a tutorial available? Thanx Quote Link to comment Share on other sites More sharing options...
Dark Zydor Posted April 28, 2017 Share #2682 Posted April 28, 2017 I updated yesterday to 6.1.1 from 6.1 using 3615 loader. No problem so far. Quote Link to comment Share on other sites More sharing options...
Olegin Posted April 28, 2017 Share #2683 Posted April 28, 2017 6.1.1 is not avalible now... Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted April 28, 2017 Share #2684 Posted April 28, 2017 I updated yesterday to 6.1.1 from 6.1 using 3615 loader. No problem so far. Was this baremetale or VM? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted April 28, 2017 Share #2685 Posted April 28, 2017 6.1.1 is not avalible now... What do you mean by that? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted April 28, 2017 Share #2686 Posted April 28, 2017 Hi. Simple question. Has enyone tried 6.1.1 update on DS3615xs loader? I tried both 3615xs and 3617xs and none worked when doing an upgrade. By "none worked" I mean that the update actually was applied successfuly but then when the machine rebooted automatically I was then unable to acces DSM. Making a fresh install with DSM 6.1.1 doesn't seem to be a problem although I see unsual logs related to the patching that should be addressed in order to avoid potential issues. Quote Link to comment Share on other sites More sharing options...
Olegin Posted April 28, 2017 Share #2687 Posted April 28, 2017 6.1.1 is not avalible now... What do you mean by that? I don't know why, but here it's absent https://www.synology.com/en-global/supp ... d/DS3617xs P.S. And here too https://usdl.synology.com/download/DSM/ ... 1.1/15095/ Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted April 28, 2017 Share #2688 Posted April 28, 2017 6.1.1 is not avalible now... What do you mean by that? I don't know why, but here it's absent https://www.synology.com/en-global/supp ... d/DS3617xs P.S. And here too https://usdl.synology.com/download/DSM/ ... 1.1/15095/ https://download.synology.com/download/ ... 1.1/15101/ Quote Link to comment Share on other sites More sharing options...
Olegin Posted April 28, 2017 Share #2689 Posted April 28, 2017 https://download.synology.com/download/DSM/release/6.1.1/15101/ I don't find pat files for 3615/3617... Quote Link to comment Share on other sites More sharing options...
hellbondz Posted April 28, 2017 Share #2690 Posted April 28, 2017 Hi. This update was normally visible from control panel "Update & restore" on my baremetal with DS3615xs loader, but today when i logged in i don't see it anymore. It was reverted by Synology itself? And ther's no ".pat" file for 3615 in http://download.synology.com/download/D ... 1.1/15101/ location. Maybe it had some serious problems. Quote Link to comment Share on other sites More sharing options...
Dark Zydor Posted April 28, 2017 Share #2691 Posted April 28, 2017 I updated yesterday to 6.1.1 from 6.1 using 3615 loader. No problem so far. Was this baremetale or VM? Baremetale install Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted April 28, 2017 Share #2692 Posted April 28, 2017 https://download.synology.com/download/DSM/release/6.1.1/15101/ I don't find pat files for 3615/3617... Hi.This update was normally visible from control panel "Update & restore" on my baremetal with DS3615xs loader, but today when i logged in i don't see it anymore. It was reverted by Synology itself? And ther's no ".pat" file for 3615 in http://download.synology.com/download/D ... 1.1/15101/ location. Maybe it had some serious problems. 6.1.1 was available in all their repositories yesterday and 6.1.1 was being proposed within DSM update settings. This means Synology has removed those updates most certainly because they had some bug and they didn't want the update to spread any further. Quote Link to comment Share on other sites More sharing options...
Cr4z33 Posted April 28, 2017 Share #2693 Posted April 28, 2017 https://download.synology.com/download/DSM/release/6.1.1/15101/ I don't find pat files for 3615/3617... Hi.This update was normally visible from control panel "Update & restore" on my baremetal with DS3615xs loader, but today when i logged in i don't see it anymore. It was reverted by Synology itself? And ther's no ".pat" file for 3615 in http://download.synology.com/download/D ... 1.1/15101/ location. Maybe it had some serious problems. 6.1.1 was available in all their repositories yesterday and 6.1.1 was being proposed within DSM update settings. This means Synology has removed those updates most certainly because they had some bug and they didn't want the update to spread any further. Hmm I already ran the update yesterday, but I hope I won't have issues... Quote Link to comment Share on other sites More sharing options...
Salah Posted April 28, 2017 Share #2694 Posted April 28, 2017 Please send logs when all above is corrected. I put logs up but gave up on v1.02a2 ds3617xs. I dont think juns patch for it is working just yet. Rolled back to 1.02a ds3615xs with injected broadcom Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted April 28, 2017 Share #2695 Posted April 28, 2017 Please send logs when all above is corrected. I put logs up but gave up on v1.02a2 ds3617xs. I dont think juns patch for it is working just yet. Rolled back to 1.02a ds3615xs with injected broadcom 3617xs works fine for me. You said you "injected" broadcom. Do you mean you used the ramdisk I posted here or did you do something else? Quote Link to comment Share on other sites More sharing options...
Salah Posted April 28, 2017 Share #2696 Posted April 28, 2017 6.1.1 was available in all their repositories yesterday and 6.1.1 was being proposed within DSM update settings. This means Synology has removed those updates most certainly because they had some bug and they didn't want the update to spread any further. Still Shows in VDSM's. Guess they goofed big Quote Link to comment Share on other sites More sharing options...
Salah Posted April 28, 2017 Share #2697 Posted April 28, 2017 You said you "injected" broadcom. Do you mean you used the ramdisk I posted here or did you do something else? I did not use the ramdisk. Just the pre compiled file. I need to pull source for nic/raid and compile. Raid booted bad after a day with bad super. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted April 28, 2017 Share #2698 Posted April 28, 2017 You said you "injected" broadcom. Do you mean you used the ramdisk I posted here or did you do something else? I did not use the ramdisk. Just the pre compiled file. I need to pull source for nic/raid and compile. Raid booted bad after a day with bad super. So the firmware is not being asked anymore by DSM? Care to share what source you used? As for the disk controller the module is already included in the loader so I am not sure why you needed to compile that again. I thought your problem was only network access to your box. Quote Link to comment Share on other sites More sharing options...
Salah Posted April 29, 2017 Share #2699 Posted April 29, 2017 Think we have translation issue. Quote Link to comment Share on other sites More sharing options...
opty Posted April 29, 2017 Share #2700 Posted April 29, 2017 @Polanskiman I tried your ramdisk on my dell T310 poweredge server and no ip adress however i used the guide by IG-88 and i was able to add the right firmware for bnx2 and got an ip address. my problems didn't end there after a bare metal install upon the first reboot diskstation disappeared from the network! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.