Barrow1990 Posted March 16, 2017 Share #2301 Posted March 16, 2017 Baremetal is Running DSM 6.0.2-8451 Update 9 VM Is Successfully running the same Version but unable to detect the passthrough with the 6.0.2 V1.01 Bootloader. VM Is Successfully running the same Version but unable to detect the passthrough with the 6.1 V1.02a Bootloader. Think there is no driver for that card. Running also vm with passthrough and this works good. But I use a lsi card. But the same card works fine on baremetal Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sze Posted March 16, 2017 Share #2302 Posted March 16, 2017 Find my error with an empty General page. I also get an error if I run dmesg. This was related to a wrong numbers of CPU cores. With 6 cores I get that problem. With 4 cores everything runs fine. Also dmesg is working. Quote Link to comment Share on other sites More sharing options...
extenue Posted March 16, 2017 Share #2303 Posted March 16, 2017 Good Evening, for those still on DSM 6.0.2 , have you got webdav working ? i am not able to have it to work on my two instances of 6.0.2 whereas it works fine on xpenoboot i made some research which point me to native DSM 6 where they say to fix permissions which i did on jun 6.0.2 but no luck If anyone can share some information then this would be very appreciated thanks XT no one is using webdav , no one has an issue or no one want to reply ? i am just looking to know if webdav is working fo you ... Quote Link to comment Share on other sites More sharing options...
extenue Posted March 16, 2017 Share #2304 Posted March 16, 2017 Good Evening, for those still on DSM 6.0.2 , have you got webdav working ? i am not able to have it to work on my two instances of 6.0.2 whereas it works fine on xpenoboot i made some research which point me to native DSM 6 where they say to fix permissions which i did on jun 6.0.2 but no luck If anyone can share some information then this would be very appreciated thanks XT no one is using webdav , no one has an issue or no one want to reply ? i am just looking to know if webdav is working fo you ... Quote Link to comment Share on other sites More sharing options...
CtrlAltDel Posted March 16, 2017 Share #2305 Posted March 16, 2017 I found this post in here by jun in response to a question about mounting the primary partitions. jun wrote: DSM seems by default create system raid arrary with big endian metadata, and normally x86 devices use little endian metadata on these arrays so /dev/md0 can not be auto detected by normal linux distributions, unless you could find a big endian linux box But linux hackers are kind enough to provide some obscure command line options to make peoples life easier. you can use follow command to exam foreign endian arrary members mdadm -Ee0.swap /dev/sda1 and use follow command to assemble an arrary and fix byte order in one go mdadm -AU byteorder /dev/md0 /dev/sda1 /dev/sdb1 ... DSM will convert it back to its preferred endian on next boot, so no further action requried. I attempted the commands and got some mixed results, but no mounted drives, I have 7 drives in this array. sudo mdadm -AU byteorder /dev/md0 /dev/sda1 /dev/sdb1 mdadm: /dev/md0 assembled from 2 drives, need 7 to start --run to insist Now I thought that might be incorrect so next I ran it with all 7 sudo mdadm -AU byteorder /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 mdadm: no super block found on /dev/sda1 (expected magic a92349b, got f987efd4) Then I just got the same error trying the first command and decided to reboot and here I am haha. ***Update after the reboot I was still getting the magic number error command and I ran mdadm -A -s AND BOOM! It loaded BOTH partitions! Time to make some changes and see if the lib/modules cp fixes my box as well. ***Update 2 When I put my USB flash for jun loader back in it booted me up and prompted me to reinstall synology and then said it was formatting the system partition and what not and has now rebooted again and now I am setting it up from scratch it looks like, setting the device name, username, etc etc. Now that I have completed the setup, I see that my important data is still intact, but all of my Synology config is lost, which I can live with!! @Trantor Please could you add a link to the post quoted in the OP so people can be find it easily? I actually did something a bit more complete in reference to that post where Jun kindly provided that information due to some technical difficulties I was having. Here we go: Tutorial: How to access DSM's Data & System partitions Nice work! Quote Link to comment Share on other sites More sharing options...
neonflx Posted March 17, 2017 Share #2306 Posted March 17, 2017 Updated to 6.1 using Alpha loader without any issues, no weird messages and everything works ok. Bare Metal, LSI 9211-8 on ASROCK board Xeon CPU 8 3tb, didn't loose any data. Just wait a day or two and then report again everything still working even my mellanox that did not work before Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted March 17, 2017 Share #2307 Posted March 17, 2017 Updated to 6.1 using Alpha loader without any issues, no weird messages and everything works ok. Bare Metal, LSI 9211-8 on ASROCK board Xeon CPU 8 3tb, didn't loose any data. Just wait a day or two and then report again everything still working even my mellanox that did not work before No volume crashes or funky messages? Quote Link to comment Share on other sites More sharing options...
mrjay Posted March 17, 2017 Share #2308 Posted March 17, 2017 upgraded to 6.1 alpha without any issues. Microserver Gen8, esxi 6.5. http://imgur.com/a/ImzZW Quote Link to comment Share on other sites More sharing options...
sze Posted March 17, 2017 Share #2309 Posted March 17, 2017 Hi, that looks good. I think my problems are comes from: 1. Using at first ds3617xs image. Having problem after one or 2 days run-time 2. Using to many cpu cores. More than 4 generates an error. Now I run 4 cores with ds3615 and will test it if it runs stable. Your screenshot shows me that this configuration is more stable... Quote Link to comment Share on other sites More sharing options...
NoFate Posted March 17, 2017 Share #2310 Posted March 17, 2017 upgraded to 6.1 alpha without any issues.Microserver Gen8, esxi 6.5. http://imgur.com/a/ImzZW can you make some screenshots or tell me how you configured your disks in esxi ? parallel ... for boot image and ssd disk ? also are you using es1000 network adapter or vmxnet3 Quote Link to comment Share on other sites More sharing options...
Barrow1990 Posted March 17, 2017 Share #2311 Posted March 17, 2017 Baremetal is Running DSM 6.0.2-8451 Update 9 VM Is Successfully running the same Version but unable to detect the passthrough with the 6.0.2 V1.01 Bootloader. VM Is Successfully running the same Version but unable to detect the passthrough with the 6.1 V1.02a Bootloader. Think there is no driver for that card. Running also vm with passthrough and this works good. But I use a lsi card. But the same card works fine on baremetal Also works in ubuntu vm Sent from my iPhone using Tapatalk Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sze Posted March 17, 2017 Share #2312 Posted March 17, 2017 Here my setup http://imgur.com/a3sr9BG Quote Link to comment Share on other sites More sharing options...
NoFate Posted March 17, 2017 Share #2313 Posted March 17, 2017 Here my setuphttp://imgur.com/a3sr9BG thnx, and you are using 1.02 alpha loader 3615xs ? Quote Link to comment Share on other sites More sharing options...
sze Posted March 17, 2017 Share #2314 Posted March 17, 2017 Baremetal is Running DSM 6.0.2-8451 Update 9 VM Is Successfully running the same Version but unable to detect the passthrough with the 6.0.2 V1.01 Bootloader. VM Is Successfully running the same Version but unable to detect the passthrough with the 6.1 V1.02a Bootloader. Sent from my iPhone using Tapatalk Check your config. My setup is here and its working: http://imgur.com/5rXRX6E http://imgur.com/0sQpXZC Quote Link to comment Share on other sites More sharing options...
sze Posted March 17, 2017 Share #2315 Posted March 17, 2017 Here my setuphttp://imgur.com/a3sr9BG thnx, and you are using 1.02 alpha loader 3615xs ? correct Quote Link to comment Share on other sites More sharing options...
Barrow1990 Posted March 17, 2017 Share #2316 Posted March 17, 2017 Baremetal is Running DSM 6.0.2-8451 Update 9 VM Is Successfully running the same Version but unable to detect the passthrough with the 6.0.2 V1.01 Bootloader. VM Is Successfully running the same Version but unable to detect the passthrough with the 6.1 V1.02a Bootloader. Sent from my iPhone using Tapatalk Check your config. My setup is here and its working: http://imgur.com/5rXRX6E http://imgur.com/0sQpXZC Will have a look on the desktop client. Been doing it through web client Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
mrjay Posted March 17, 2017 Share #2317 Posted March 17, 2017 upgraded to 6.1 alpha without any issues.Microserver Gen8, esxi 6.5. http://imgur.com/a/ImzZW can you make some screenshots or tell me how you configured your disks in esxi ? parallel ... for boot image and ssd disk ? also are you using es1000 network adapter or vmxnet3 this is my config: http://imgur.com/a/LxPM5 disks were configured as RAID 0 in B120i and then as RAW mapped device to XPE. the SSD is the datastore and i only have the VMs on it. Adapter is E1000e. this is the tutorial I used the first i configured XPE in VM viewtopic.php?f=2&t=2147 Quote Link to comment Share on other sites More sharing options...
NoFate Posted March 17, 2017 Share #2318 Posted March 17, 2017 Ah ok, and do you have smart status with that config? Quote Link to comment Share on other sites More sharing options...
mrjay Posted March 17, 2017 Share #2319 Posted March 17, 2017 unfortunately no SMART status. even though it says normal status, Wen i try to run the test i get a failed message. Quote Link to comment Share on other sites More sharing options...
Elpee Posted March 17, 2017 Share #2320 Posted March 17, 2017 Tha's why I moved from VM to bare metal... Quote Link to comment Share on other sites More sharing options...
mrjay Posted March 17, 2017 Share #2321 Posted March 17, 2017 for me it was a waste of resources (E3-1220L v2 CPU and 16GB of RAM on the server). i have a couple of VMs with Windows and Linux on it doing other stuff. Quote Link to comment Share on other sites More sharing options...
Black6spdZ Posted March 17, 2017 Share #2322 Posted March 17, 2017 There are some brave souls here willing to run a NAS as a VM.. Do the benefits really out weigh the risks? Quote Link to comment Share on other sites More sharing options...
sagrotan Posted March 17, 2017 Share #2323 Posted March 17, 2017 There are some brave souls here willing to run a NAS as a VM.. Do the benefits really out weigh the risks? Why not open a new thread? This is a forum and not a chatboard. Once again the question: are there any Mods around here? Quote Link to comment Share on other sites More sharing options...
NoFate Posted March 17, 2017 Share #2324 Posted March 17, 2017 i have esxi 6.5 running om my hp gen8 server when i import that .vmdk file to register the VM i always have this issue/warning : This VM is attached to a network portgroup that doesn't exist. Edit this VM and attach it to a different network i cant remove the adapter or change settings in the created vm, so therefore if i startup this vm, offcourse the network is not started i also had the same issue using the old 6.02 loader, now also with the alpha in order to make it work, i need to manually create the vmware , then it works Quote Link to comment Share on other sites More sharing options...
Barrow1990 Posted March 17, 2017 Share #2325 Posted March 17, 2017 Ive managed to get the ASM1062 Sata PCI-E Card running on a passthrough. But its using the baremetal login. Is there a way to make it so the ESXi version pulls the driver for it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.