Masrawy Posted January 20, 2017 Share #1826 Posted January 20, 2017 Hello guys, It's my first time trying XPEnology, I waiting this long until DSM 6 was released and stable. I see that SHR is not enabled by default, how to enable it? I saw this post below, but I can't find the folder or how to do it. Any body can help? Please, is there any way to make a loader that uses a version that supports SHR natively?Maybe DS1815+ or something like that? I am absolutely willing to test/work on to help, but I am no big linux-whiz I'm afraid... You dont need a DS1815+ for SHR support just edit /etc.defaults/synoinfo.conf comment out/delete supportraidgroup="yes" then add support_syno_hybrid_raid="yes" press F5 on you web browser Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted January 20, 2017 Share #1827 Posted January 20, 2017 Hello guys, It's my first time trying XPEnology, I waiting this long until DSM 6 was released and stable. I see that SHR is not enabled by default, how to enable it? I saw this post below, but I can't find the folder or how to do it. Any body can help? Please, is there any way to make a loader that uses a version that supports SHR natively?Maybe DS1815+ or something like that? I am absolutely willing to test/work on to help, but I am no big linux-whiz I'm afraid... You dont need a DS1815+ for SHR support just edit /etc.defaults/synoinfo.conf comment out/delete supportraidgroup="yes" then add support_syno_hybrid_raid="yes" press F5 on you web browser SSH with admin input your password elevate rights by doing: sudo -i input your password again you are now root edit the synoinfo.conf file with vi or nano if you have it installed. I prefer nano it's easier to use. You can install it through the community package center vi /etc.defaults/synoinfo.conf or nano /etc.defaults/synoinfo.conf comment out/delete supportraidgroup="yes" then add support_syno_hybrid_raid="yes" Save the file. You are done. Preferably reboot. If you don't know what I am talking about then you shouldn't be tinkering with system files. Quote Link to comment Share on other sites More sharing options...
pigr8 Posted January 20, 2017 Share #1828 Posted January 20, 2017 is there a lista of supported SATA drivers in 1.01 loader? i dont think i've seen one Quote Link to comment Share on other sites More sharing options...
Salah Posted January 20, 2017 Share #1829 Posted January 20, 2017 This thread is getting long and hard to follow. Probably best to start new with Juns v1.01 to avoid confusion. Quote Link to comment Share on other sites More sharing options...
komarto Posted January 20, 2017 Share #1830 Posted January 20, 2017 Update 9 is the devil After updating I did not have any network... Had to go to serial console and downgrade to version 5.2. after upgrading back to version 6 update8 with jun loader I noticed that my Realtek card is not working anymore just my intel card. I noticed that module r8168 is not loaded when DSM is done loading. when I insmod the module I see eth2 with ifconfig -a but it has the same MAC address as eth0... I tried setting MAC address through the GRUB config, but with no avail... The module will not self load on boot only manually and when i look at eth2 using ifconfig -a it has the same MAC as eth0. All was fine before update 9 I need a lead on where can I change the MAC after boot and autoload the r8168 module on boot. Jun please help. ** EDIT ** Kinda solved it. 1. removed any reference to MAC addresses from the GRUB config. 2. found out that "ifconfig eth2 up" brings up the device and it works. 3. created a startup script that will activate the module on boot and bring up the device. admin@XXXXXX:~$ cat /usr/local/etc/rc.d/S99realtek_fix.sh #!/bin/sh echo "loading r8168 module" insmod /usr/lib/modules/update/r8168.ko echo "bringing device up" ifconfig eth2 up 4. updated to Update 9 and it's works. 5. I will never EVER install updates when they come out, I will wait! Hope this will help somene, And hope that a developer can figure out why is this module and possibly other are not loading on boot. Quote Link to comment Share on other sites More sharing options...
Masrawy Posted January 20, 2017 Share #1831 Posted January 20, 2017 Thanks Polanskiman for your help. I have to say all this is pretty new for me, so I'm not quite sure to understand it all. Any ways, I have nothing to lose since there's no data at all on my NAS for the moment. I'm learning and trying things with it before I transfer everything from my other computer to this NAS. What are VI and Nano?I tried to read and search some information but couldn't find answers. Also, when you say comment out/delete or add something in the script, I'm expecting to open a file to edit it (for example in NotePad++), but it's not the case since it is through SSH, I'm not quite sure to understand how it works. Can you clarify a little more please and send a screenshot of what I should expect? As I said, all this is new stuff for me. Thanks a lot again SSH with admin input your password elevate rights by doing: sudo -i input your password again you are now root edit the synoinfo.conf file with vi or nano if you have it installed. I prefer nano it's easier to use. You can install it through the community package center vi /etc.defaults/synoinfo.conf or nano /etc.defaults/synoinfo.conf comment out/delete supportraidgroup="yes" then add support_syno_hybrid_raid="yes" Save the file. You are done. Preferably reboot. If you don't know what I am talking about then you shouldn't be tinkering with system files. Quote Link to comment Share on other sites More sharing options...
billat29 Posted January 20, 2017 Share #1832 Posted January 20, 2017 Also, when you say comment out/delete or add something in the script, I'm expecting to open a file to edit it (for example in NotePad++), but it's not the case since it is through SSH, I'm not quite sure to understand how it works. Can you clarify a little more please and send a screenshot of what I should expect? Oh dear! You are at the start of a steep learning curve. So.When you use SSH, you are opening a remote console onto the linux system that underlies DSM. vi and nano are standard linux editors which run on that box and you can use either of them to change one of the files that DSM uses. It's a matter of personal preference which one you choose. If your favourite is not already installed, you can always install your editor of choice. You can also look at WinSCP - a program to install on your windows machine which will allow you to connect to DSM and browse to the files you want to edit. You can right click on the files and then use Notepad++ as your editor. WinSCP will download the file to your Windows machine, allow you to edit, and when you save, put it back on the Xpenology box. Apart from the instructions which say this is the file to edit and these are the changes to make, this is all standard linux stuff, so you should be able to find help on how to do it in that community Quote Link to comment Share on other sites More sharing options...
rikadoo Posted January 21, 2017 Share #1833 Posted January 21, 2017 Hello, im using juns loader for a while and it works perfect. Now i wanted to migrate to btrfs raid 5 but when i make an raid set it fails. I read that btrfs had to be working with juns loader, is there something i had to do? A setting in the loader or has it have to work immediatly? I used the search but this is not working good. Quote Link to comment Share on other sites More sharing options...
john_matrix Posted January 21, 2017 Share #1834 Posted January 21, 2017 Baremetal updated successfully to Update 9 with Jun's loader 1.0 Quote Link to comment Share on other sites More sharing options...
nikkpap Posted January 21, 2017 Share #1835 Posted January 21, 2017 does anyone can share the DSM_DS3615xs_8451.Update8.pat or DSM_DS3615xs_8451.Update6.pat update and do not install DSM_DS3615xs_8451.Update9.pat it will kill your network card and you have to reinstall it nice try synology thanks Quote Link to comment Share on other sites More sharing options...
udurast Posted January 21, 2017 Share #1836 Posted January 21, 2017 I've been tracking this thread and have not seen any updates regarding network drivers for Hyper-V VM - are there any news? Quote Link to comment Share on other sites More sharing options...
Aziona Posted January 21, 2017 Share #1837 Posted January 21, 2017 Problem with adding BTRFS option and using Jun's loader v1.01: as soon as I edit /etc.defaults/synoinfo.conf. delete supportraidgroup="yes" and add support_syno_hybrid_raid="yes", then I cannot add/change the volume anymore and when I reboot the system it will cannot be accessed anymore (no IP nr). Anybody know what I might have done wrong? I login via SSH (admin + root password, then sudo su - and again password). Quote Link to comment Share on other sites More sharing options...
Aziona Posted January 21, 2017 Share #1838 Posted January 21, 2017 sumitted twice Quote Link to comment Share on other sites More sharing options...
kaku Posted January 21, 2017 Share #1839 Posted January 21, 2017 Hello, im using juns loader for a while and it works perfect. Now i wanted to migrate to btrfs raid 5 but when i make an raid set it fails. I read that btrfs had to be working with juns loader, is there something i had to do? A setting in the loader or has it have to work immediatly? I used the search but this is not working good. That's what I said too. BTRFS volume creation fails on SHR disk groups too. Tried both Jun's and Quicknick's. But some are saying it does work in Jun's. Can't say what I am missing. Sent from my SM-G920I using Tapatalk Quote Link to comment Share on other sites More sharing options...
renedis Posted January 21, 2017 Share #1840 Posted January 21, 2017 does anyone can share the DSM_DS3615xs_8451.Update8.pat or DSM_DS3615xs_8451.Update6.pat update and do not install DSM_DS3615xs_8451.Update9.pat it will kill your network card and you have to reinstall it nice try synology thanks It's on the official Synology website. https://usdl.synology.com/download/DSM/ ... date_pack/ Pick the right version (8451-8) and download the 3615xs pat file. Quote Link to comment Share on other sites More sharing options...
renedis Posted January 21, 2017 Share #1841 Posted January 21, 2017 I know that most times TurboBoost is not working. I'm also active in the Hackintosh scene and it was a problem there too. They made so called dsdt and ssdt files to tell the system what the possible CPU (and Boost) frequencies are. Maybe that's possible for DSM to since it's Linux based? Edit: Link to some information https://www.tonymacx86.com/threads/guid ... sdt.52683/ Quote Link to comment Share on other sites More sharing options...
mb51running Posted January 21, 2017 Share #1842 Posted January 21, 2017 Update 9 was installed successfully. (DSM on VMware Workstation with Jun's Mod V1.0) The only problem was that no IP was assigned via DHCP after the update! I also tried several hard resets without success. My solution was to change the Network Device in the .vmx file from e1000 to e1000e! ethernet0.virtualDev = "e1000e" Quote Link to comment Share on other sites More sharing options...
meimeiriver Posted January 21, 2017 Share #1843 Posted January 21, 2017 Update 9 was installed successfully. (DSM on VMware Workstation with Jun's Mod V1.0)The only problem was that no IP was assigned via DHCP after the update! I also tried several hard resets without success. My solution was to change the Network Device in the .vmx file from e1000 to e1000e! ethernet0.virtualDev = "e1000e" Was your jun package not set to use e100e already then?! Mine was, and update still fubarred. Quote Link to comment Share on other sites More sharing options...
Messenger Posted January 22, 2017 Share #1844 Posted January 22, 2017 Is update 9 safe to install on baremetal (n54l)? i´m not sure from the other postings. Quote Link to comment Share on other sites More sharing options...
mazay Posted January 22, 2017 Share #1845 Posted January 22, 2017 Hi! Can some one tell me, 6Tb hard drives supported on Xprenology? Quote Link to comment Share on other sites More sharing options...
captainfred Posted January 22, 2017 Share #1846 Posted January 22, 2017 Hi!Can some one tell me, 6Tb hard drives supported on Xprenology? Yes I'm using 6tb WD reds. Quote Link to comment Share on other sites More sharing options...
extenue Posted January 22, 2017 Share #1847 Posted January 22, 2017 Do you see that your DHCP server assinged an IP address to your VM? Thanks Marigo , with this sentence you pointed me on good direction , i installed pfSense as a VM which served as a DHCP server and then i could install Xpenology What i did not tell is i rent a dedicated server on which i installed Proxmox and i struggled a lot to get Xpen to work Quote Link to comment Share on other sites More sharing options...
spiderben25 Posted January 22, 2017 Share #1848 Posted January 22, 2017 I just updated from update 7 to 9 and now I can't find my NAS on the network anymore... Any insights on what I should do? Using a HP N54L, baremetal, with jun's 1.0 loader. Quote Link to comment Share on other sites More sharing options...
Aziona Posted January 22, 2017 Share #1849 Posted January 22, 2017 (edited) Tried to install update 9 on a fresh bare metal install (N54L) using 1.01 loader but system was not getting an IP anymore. Have now downloaden all individual updates and started to install from Update 1 until Update 8. Everything seemed to go okay. Will not try Update 9. Btrfs is also avaulable now. Apparantly btrfs becomes available after these updates. Have 4 disks volume from a DS414 with SHR on ext4 (?). I assume I cannot put those in my N54L with Jun's 1.01 loader as it does not support SHR? Edited January 22, 2017 by Guest Quote Link to comment Share on other sites More sharing options...
opty Posted January 22, 2017 Share #1850 Posted January 22, 2017 I just updated from update 7 to 9 and now I can't find my NAS on the network anymore... Any insights on what I should do?Using a HP N54L, baremetal, with jun's 1.0 loader. use 1.01 loader and it will work fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.