jun Posted November 15, 2016 Author Share #1251 Posted November 15, 2016 I worked it out (sort of).After trying all your tips, the reader still did not work in any way. Almost ready to throw it out of the window, I tried to insert an old USB 2 Hub between de HP microserver and smartreader. Immediately, the reader started working, exactly as before on 5.2. I tried to remove the hub and immediately it stopped working again. I also tried different BIOS settings regarding USB, bot none worked. Lsusb only shows the device when connected through the hub. So the only way to get the smargo working for now is to use the old (Sweex) USB 2.0 Hub. I am okay with that for now, but if possible I would like to connect the reader directly. look at my smargo info inside chroot:oscam manualy compiled using smargo in libusb instaled all dependencies and libusb-dev 1.0 i think. root@nas:/usr/src/oscam-svn/Distribution# ./list_smargo-1.20-unstable_svn11279-x86_64-linux-gnu-libusb libudev: udev_has_devtmpfs: name_to_handle_at on /dev: Function not implemented Looking for smartreader compatible devices... bus 002, device 005 : 0403:6001 Smartreader2 plus (type=SRv2, in_ep=02, out_ep=81; insert in oscam.server 'device = SRv2;Serial:CCCCCCCC') dmesg after unplug it and plug it again: [36342.567036] usb 2-1.4: USB disconnect, device number 4 [36344.801652] usb 2-1.4: new full-speed USB device number 5 using ehci-pci again, if you guys are using oscam, dont use FTDI drivers, reconfigure your driver to use smartreader protocol, its alot beter [reader] protocol = smartreader device = SRv2;Serial:CCCCCCCC detect = cd work 100% This version of loader (and synology's version) does not have driver for ohci usb controller, a host controller for usb 1.x. Why it is not included in the loader? Because I did not notice it was not included. Why not for synology? My understanding is that, Intel invent UHCI for usb 1.x, so normally, intel chipsets will never have OHCI controllers, nowdays even UHCI's are uncommon, lots of usb 2.x/3.x controller seems include builtin hubs to do the translation for usb 1.x devices. In your use case, the external hub simply acts as a usb 1.x to usb 2.x translator, that is a viable workaround for the moment. I will make sure this driver is availble when next release is out, developers can also compile ohci-hcd yourself. Quote Link to comment Share on other sites More sharing options...
anthonyuk Posted November 15, 2016 Share #1252 Posted November 15, 2016 Anyone know if we can update to 6.0.2-8451 update 3? It worked fine on my ESXi install. Quote Link to comment Share on other sites More sharing options...
aleksey_z Posted November 15, 2016 Share #1253 Posted November 15, 2016 @Jun: Did you try to install DSM 6.0.2-8451 Update 3? It contains new kernel image in flashupdate_6.0-8451-s3_all.deb. I guess because of fix Dirty Cow CVE-2016-5195 vulnerability. Anyway here is change log: https://www.synology.com/cs-cz/releaseNote/DS3615xs Edit: I successfully updated to DSM 6.0.2-8451 Update 3. The new kernel will not in effect, unless manually copy it to the right place. Since Intel machines are in fact using unmodified synology kernel, I am considering restructure the boot partition's to closely match synology's, so that new kernel will take effect automatically, but this has the potential risk of a small upgrade may break a working system. Hi @Jun & @Arcao & Community. Thanks again for your work. All functions on my servers (in signature) normally work, more than a month. Prompt me please, I can normally upgrade to Update3, if now I use a Hybrid UEFI/BIOS baremetal image setsunakawa (on 10 page), but with replaced the image/DS3615xs/ramdisk.lzma in the boot partition from the image in your, Jun, first post (on page 1). Now my grub.cfg files are as follows: first server (Intel D2700MUD): set default='0' set timeout='2' set fallback='0' menuentry 'Synology DS3615xs' --class os { insmod fat linux /image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 SataPortMap=2 syno_hw_version=DS3615xs vid=0x**** pid=0x**** console=uart,io,0x3f8,115200n8 sn=********** mac1=********** withefi elevator=your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } second server (Asus P8z68vlx): set default='0' set timeout='2' set fallback='0' menuentry 'Synology DS3615xs' --class os { insmod fat linux /image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 SataPortMap=5 syno_hw_version=DS3615xs vid=0x**** pid=0x**** console=uart,io,0x3f8,115200n8 sn=********** mac1=********** withefi elevator=your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } Thankyou. Quote Link to comment Share on other sites More sharing options...
chrobiche Posted November 15, 2016 Share #1254 Posted November 15, 2016 Is there a better way of hiding the boot drive on ESXI or should I still add rmmod=ata_piix to the list of parameters?Edit: Doesn't seem to work. I've tried both ata_piix and rmmod=ata_piix as extra arguments Did you ever manage to hide the boot drive? Yes, I just converted the image to IDE and appended rrmod. Can't remember the details though, but I will check that once I get the time. I'm also very interested. Maybe it could be quicker if you can share your modified image. Quote Link to comment Share on other sites More sharing options...
viktortrass Posted November 15, 2016 Share #1255 Posted November 15, 2016 i have a question to you, following the tutorial to install DSM 6 or migrate...could I install .pat file for DS416 for example instead of DS3615 like in the installation tutorial??this is because my hp microserver has 4 slot for HDDS and not 12 like DS3615, I would like to install .pat file from DS416 to show 4 slot disc instead of 12!!would it works? Quote Link to comment Share on other sites More sharing options...
abced Posted November 15, 2016 Share #1256 Posted November 15, 2016 i have a question to you, following the tutorial to install DSM 6 or migrate...could I install .pat file for DS416 for example instead of DS3615 like in the installation tutorial??this is because my hp microserver has 4 slot for HDDS and not 12 like DS3615, I would like to install .pat file from DS416 to show 4 slot disc instead of 12!!would it works? No, it wouldn't. Just edit synoinfo.conf in etc.defaults and you can set any number of discs there Quote Link to comment Share on other sites More sharing options...
Arcao Posted November 15, 2016 Share #1257 Posted November 15, 2016 (edited) Prompt me please, I can normally upgrade to Update3, if now I use a Hybrid UEFI/BIOS baremetal image setsunakawa (on 10 page), but with replaced the image/DS3615xs/ramdisk.lzma in the boot partition from the image in your, Jun, first post (on page 1). If your bootloader works OK, it's not needed to touch on it. Just update to DSM 6.0.2 8451 Update3 only. Edited November 15, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
viktortrass Posted November 15, 2016 Share #1258 Posted November 15, 2016 i have a question to you, following the tutorial to install DSM 6 or migrate...could I install .pat file for DS416 for example instead of DS3615 like in the installation tutorial??this is because my hp microserver has 4 slot for HDDS and not 12 like DS3615, I would like to install .pat file from DS416 to show 4 slot disc instead of 12!!would it works? No, it wouldn't. Just edit synoinfo.conf in etc.defaults and you can set any number of discs there why?is the same operating system with same kernel no?or is the bootloader able to install DSM only with DS3615 firmware?...and if I edit synoinfo..Can it shows 4 disc on storage management? Quote Link to comment Share on other sites More sharing options...
pigr8 Posted November 15, 2016 Share #1259 Posted November 15, 2016 (edited) tested and everything is working as expected, upgraded my gen8 baremetal from 5.2 to 6.0.2-u3 with all data and config intact, no problem whatsoever, the only thing is that after the upgrade dsm changed my local ip to dhcp instead of let it static but it's not an issue, reverted back to static in 10 seconds. al packages working fine, update3 applied and rebooted with no issue, changed my filesystem to btrfs so i'm pretty happy edit: one last thing, how can i change max drive shown in the disk manager? it shows 12 slot, i wanted to limit it to 5. edit2: nevermind, synoinfo.conf had maxdrives set to 12, fixed Edited November 15, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
NeoID Posted November 15, 2016 Share #1260 Posted November 15, 2016 I'm also very interested. Maybe it could be quicker if you can share your modified image. I'll take a look at it tonight as I'm pretty busy at work these days. Quote Link to comment Share on other sites More sharing options...
Neo_Reloaded Posted November 15, 2016 Share #1261 Posted November 15, 2016 @pigr8 You changed your filesystem to btrfs without loosing data? If so, how you managed to do it? tested and everything is working as expected, upgraded my gen8 baremetal from 5.2 to 6.0.2-u3 with all data and config intact, no problem whatsoever, the only thing is that after the upgrade dsm changed my local ip to dhcp instead of let it static but it's not an issue, reverted back to static in 10 seconds. al packages working fine, update3 applied and rebooted with no issue, changed my filesystem to btrfs so i'm pretty happy edit: one last thing, how can i change max drive shown in the disk manager? it shows 12 slot, i wanted to limit it to 5. edit2: nevermind, synoinfo.conf had maxdrives set to 12, fixed Quote Link to comment Share on other sites More sharing options...
snakefox666 Posted November 15, 2016 Share #1262 Posted November 15, 2016 I will make sure this driver is availble when next release is out, developers can also compile ohci-hcd yourself. Thanks in advance for that jun Quote Link to comment Share on other sites More sharing options...
pigr8 Posted November 15, 2016 Share #1263 Posted November 15, 2016 @pigr8 You changed your filesystem to btrfs without loosing data? If so, how you managed to do it? nope, recreated the array from scratch and restored the data back, you cannot change etx4 to btrfs on the fly without loosing everything. Quote Link to comment Share on other sites More sharing options...
ygor Posted November 15, 2016 Share #1264 Posted November 15, 2016 Hello there, i'm looking too upgrade to DSM6 it seems the network card in the HP N54L is not supported, i don't get an IP address. Quote Link to comment Share on other sites More sharing options...
pigr8 Posted November 15, 2016 Share #1265 Posted November 15, 2016 Hello there,i'm looking too upgrade to DSM6 it seems the network card in the HP N54L is not supported, i don't get an IP address. report says that n36l n40l and n54l are working fine. Quote Link to comment Share on other sites More sharing options...
ygor Posted November 15, 2016 Share #1266 Posted November 15, 2016 thanks, i saw i miss usb serail number and the network mac address inside the grub file. Probably related to the mac address. Quote Link to comment Share on other sites More sharing options...
ygor Posted November 15, 2016 Share #1267 Posted November 15, 2016 i just have a screen booting kernel, i set the usb SN and the MAC eth in grub, but nothing am i missing something else ? Quote Link to comment Share on other sites More sharing options...
ygor Posted November 15, 2016 Share #1268 Posted November 15, 2016 Ok after few reboot found that i was missing the selection menu : AMD at boot screen, now the n54 is on the network Quote Link to comment Share on other sites More sharing options...
holybabel Posted November 15, 2016 Share #1269 Posted November 15, 2016 Hi everyone, i already asked this in the "old" XPEnoboot thread but nobody answered. Is it possible to use a usb bluetooth stick that is not listed in the official compatibility list? I attached a Belkin usb bt stick and it seems to be recognized by the system: [ 566.689037] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 566.871019] Got empty serial number. Generate serial number from product. [ 567.047955] Bluetooth: Core ver 2.16 [ 567.047992] NET: Registered protocol family 31 [ 567.047994] Bluetooth: HCI device and connection manager initialized [ 567.048023] Bluetooth: HCI socket layer initialized [ 567.048026] Bluetooth: L2CAP socket layer initialized [ 567.048035] Bluetooth: SCO socket layer initialized [ 567.054833] Bluetooth: RFCOMM TTY layer initialized [ 567.054864] Bluetooth: RFCOMM socket layer initialized [ 567.054866] Bluetooth: RFCOMM ver 1.11 [ 567.057591] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 567.057617] Bluetooth: HIDP socket layer initialized [ 567.064134] usbcore: registered new interface driver btusb lsusb | grep Blue Bus 003 Device 002: ID 050d:0013 Broadcom Corp Belkin Bluetooth Device But the stick doesn't show up in control panel. hcitool says that the device is down and when i want to start it it shows: can't init device hci0 operation not supported (95) synology Is there any chance to get the stick up and working? Quote Link to comment Share on other sites More sharing options...
kretzu77 Posted November 15, 2016 Share #1270 Posted November 15, 2016 Need some help please. I have an HP Gen8. I tried upgrade from 5.2.5967 to 6.0.2 and failed 1. I extrated only synoboot.img from v1.01 zip and I wrote it on usb 2. I moified VID&PID (MAC also, to receive the same ip from router) 3. after restart I opened it from Assistant nad I chosed migration fron Assistant web interface (I used 6.0.2/8451 pat for ds3615xs from Synology website But the upgrade stopped with some king of "corrupt file" or something like that. Since then, I can't even connect with putty (SSH) to it (to try a downgrade back to 5.2). There is a way to solve this without losing settings&Co please? I saw something about boot menu options bareborn install/reinstall here. I have too select a boot option from iLO Console or something? I'm kind of desperate Thanks' Quote Link to comment Share on other sites More sharing options...
ygor Posted November 15, 2016 Share #1271 Posted November 15, 2016 this message should be related to VID & PID i just did the upgrade working OK on previous model (n54l) Did you put the usb Serial number key in the grub file ? it is located vid/pid/SN in hw manager, dunno if it is absolutely required Quote Link to comment Share on other sites More sharing options...
kretzu77 Posted November 15, 2016 Share #1272 Posted November 15, 2016 I used only VID, PID and MAC SN of the USB? Or previous SN of the NAS fron Assistant? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted November 15, 2016 Share #1273 Posted November 15, 2016 I used only VID, PID and MACSN of the USB? Or previous SN of the NAS fron Assistant? Of the NAS. Quote Link to comment Share on other sites More sharing options...
pigr8 Posted November 15, 2016 Share #1274 Posted November 15, 2016 are you sure you got vid & pid correctly modified? try redownload pat file maybe, i have a gen8 and everything when smooth from 5.2 Quote Link to comment Share on other sites More sharing options...
viktortrass Posted November 15, 2016 Share #1275 Posted November 15, 2016 tested and everything is working as expected, upgraded my gen8 baremetal from 5.2 to 6.0.2-u3 with all data and config intact, no problem whatsoever, the only thing is that after the upgrade dsm changed my local ip to dhcp instead of let it static but it's not an issue, reverted back to static in 10 seconds. al packages working fine, update3 applied and rebooted with no issue, changed my filesystem to btrfs so i'm pretty happy edit: one last thing, how can i change max drive shown in the disk manager? it shows 12 slot, i wanted to limit it to 5. edit2: nevermind, synoinfo.conf had maxdrives set to 12, fixed where is synoinfo.conf?? I cant find it!!please someone could tell me it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.