mpuff 1 Posted November 11, 2016 Share Posted November 11, 2016 Does this loader work with the hp micro gen 8 hardware? Does someone tryed it? Quote Link to post Share on other sites
j911 0 Posted November 11, 2016 Share Posted November 11, 2016 (edited) Hi, I can confirm it does work on HP gen8 Edited November 11, 2016 by Guest Quote Link to post Share on other sites
j911 0 Posted November 11, 2016 Share Posted November 11, 2016 God this thread is already confusing enough without having to log in and see ( was "A new loader for latest DSM").Making it sound like something went wrong and searching the thread for 15 min looking for info only to find nothing. Yup lets make this thread a bit more of a mess to navigate I think we need to split this thread into FAQ. Confirmed HW, support requests and a read only thread for devs to post updates. Quote Link to post Share on other sites
trublu 0 Posted November 11, 2016 Share Posted November 11, 2016 Since there are considerable difference between beta source and the release version, I write and compile kernel modules instead, even the AMD kernel is a combination of the original kernel and the AMD support code compiled as module (sort of). I compile beta src kernel only to aid debugging, itself does not work properly, lacking required symbol etc, and I do not bother to fix it.can you provide a quick writeup on how you added LSI support as an example so that some of us can work on doing the same for other drivers? most drivers has nothing special, and for special drivers, better to wait for proper kernel source. For LSI hba, I use existing driver, patch the kernel to make it has proper device name, from sas* to sd* thanks for the info. Do you have any of your stuff on Github? Also, any chance you might add intel LAN support? Thanks. Quote Link to post Share on other sites
Gronaldo 4 Posted November 11, 2016 Share Posted November 11, 2016 I have looked everywhere on the internet and in my hp gen7 specs, i can't find how to configure the sata option for the N54L with 5 disks installed.Is there a risk to test several ? Like 41, 50 or 401 ? Just upgraded my N54L. You need to ensure you delay first menu Timeout to 5 sec. so you can select the AMD boot. Just set VID and PID (and MAC/Serial if needed). No Sata port settings required. Quote Link to post Share on other sites
Razor237 0 Posted November 11, 2016 Share Posted November 11, 2016 anyone know if my HP nic card will work with this loader ...HP NC364T Quote Link to post Share on other sites
gtaking112 0 Posted November 12, 2016 Share Posted November 12, 2016 Razor237 I've had no issues with this card so far Quote Link to post Share on other sites
mattail 0 Posted November 12, 2016 Share Posted November 12, 2016 I have an asrock E3C236D2I MB with 2 NICs - Intel i210 + Intel i219. Are these supported? Quote Link to post Share on other sites
meimeiriver 1 Posted November 12, 2016 Share Posted November 12, 2016 DSM 6.0.2-8451 Update 3 is ready. Is it safe to update to this?! Quote Link to post Share on other sites
moimoimoi 0 Posted November 12, 2016 Share Posted November 12, 2016 Updated to DSM 6.0.2-8451 Update 3 on my N54L > No problem ! Quote Link to post Share on other sites
easytech 0 Posted November 12, 2016 Share Posted November 12, 2016 Hi Community, I created a simple video to show the beginner how to prepare the Synoboot.img bootable device and also how to find your pendrive VID and PID. Below is the youtube link. Hope this will help the beginner on the preparation. Thank you. Jason EasyTech Quote Link to post Share on other sites
meimeiriver 1 Posted November 12, 2016 Share Posted November 12, 2016 Updated to DSM 6.0.2-8451 Update 3 on my N54L > No problem ! Thanks for the confirmation! Worked flawlessly, indeed! Quote Link to post Share on other sites
arejaytee 2 Posted November 12, 2016 Share Posted November 12, 2016 God this thread is already confusing enough without having to log in and see ( was "A new loader for latest DSM").Making it sound like something went wrong and searching the thread for 15 min looking for info only to find nothing. Yup lets make this thread a bit more of a mess to navigate I think we need to split this thread into FAQ. Confirmed HW, support requests and a read only thread for devs to post updates. Hardware thread http://xpenology.com/forum/viewtopic.php?f=2&t=22802 Support thread http://xpenology.com/forum/viewtopic.php?f=2&t=22801 FAQ's should be in the second post on this thread which should also become the Dev announcement one. Quote Link to post Share on other sites
index 0 Posted November 12, 2016 Share Posted November 12, 2016 any one go to try DSM 6.1 Beta XD Quote Link to post Share on other sites
boOmLa 0 Posted November 12, 2016 Share Posted November 12, 2016 (edited) Hi Community, I created a simple video to show the beginner how to prepare the Synoboot.img bootable device and also how to find your pendrive VID and PID. Below is the youtube link. Hope this will help the beginner on the preparation. Thank you. Jason EasyTech Thank you so much mate :- that was a big help for a noob like me. Can I use the same method to upgrade (not a fresh install) from DSM 5.2-5644 on a barmetal mini computer (lenovo M700) to DSM 6.0.2 without data loss on the SSD ? Thanx in advnced Edited November 12, 2016 by Guest Quote Link to post Share on other sites
Polanskiman 383 Posted November 12, 2016 Share Posted November 12, 2016 Updated to DSM 6.0.2-8451 Update 3 on my N54L > No problem ! Thanks for the confirmation! Worked flawlessly, indeed! I came across a post in the Spanish section of someone who updated to update 3 and is now unable to install any package fom Package Center. Do you have that problem? Quote Link to post Share on other sites
Polanskiman 383 Posted November 12, 2016 Share Posted November 12, 2016 any one go to try DSM 6.1 Beta XD Yes someone did and came crying afterward. Quote Link to post Share on other sites
Hitcher99 0 Posted November 12, 2016 Share Posted November 12, 2016 Still NO NEW NEWS ON HYPER-V Support Quote Link to post Share on other sites
chrobiche 0 Posted November 12, 2016 Share Posted November 12, 2016 Hi, i'm using ESXi, and a 12 drives setup. how can i hide the synoboot ide drive or placing it in the 13th position, because i can't see my last disk. Quote Link to post Share on other sites
Polanskiman 383 Posted November 12, 2016 Share Posted November 12, 2016 Still NO NEW NEWS ON HYPER-V Support Patience is a vertue. Quote Link to post Share on other sites
chege 0 Posted November 12, 2016 Share Posted November 12, 2016 any one go to try DSM 6.1 Beta XD As for now its only possible thru virtualDSM on DSM 6.0. Synology always is messing with beta update and always is problem with volumes/drives on clean or upgraded system. Quote Link to post Share on other sites
chege 0 Posted November 12, 2016 Share Posted November 12, 2016 any one go to try DSM 6.1 Beta XD As for now its only possible thru virtualDSM on DSM 6.0. Synology always is messing with beta update and always is problem with volumes/drives on clean or upgraded system. Quote Link to post Share on other sites
andrejtom 0 Posted November 12, 2016 Share Posted November 12, 2016 Updated to DSM 6.0.2-8451 Update 3 on my HP MicroServer v8> No problem ! Quote Link to post Share on other sites
oldfaitfull 0 Posted November 12, 2016 Share Posted November 12, 2016 First a thanks to the developers of this mighty fine bootloader. I'm using it on a baremetal N54L and all works great, even DVB-T! The only thing I run into is the following. I have a Smargo Smartreader V2 for decrypting DVB-T channels. The device uses FTDI for Serial and is not recognized out of the box. So, I had to install the 'USBSerialDrivers DSM 6.0' package from Jadahl. Now the device is recognised but it won't instsall driver or map to /dev/(ttyUSBx). This is what I see in my dmesg log: [ 241.750500] usbserial: USB Serial deregistering driver FTDI USB Serial Device [ 241.750531] usbcore: deregistering interface driver ftdi_sio [ 327.902940] usbcore: registered new interface driver ftdi_sio [ 327.902966] usbserial: USB Serial support registered for FTDI USB Serial Device [ 327.916916] usbcore: registered new interface driver ti_usb_3410_5052 [ 327.916941] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 327.916957] usbserial: USB Serial support registered for TI USB 5052 2 port adapter Is the firmware (ti_3410.fw) present in the DSM 6.0 kernel? How to check? Linux NAS 3.10.77 #8451 SMP Wed Aug 17 05:12:41 CST 2016 x86_64 GNU/Linux synology_bromolow_3615xs Has anyone a suggestion? Quote Link to post Share on other sites
malpensa 0 Posted November 12, 2016 Share Posted November 12, 2016 Thanks Jun and everyone. DSM 6.0.2-8451 Update 3 has successfully running in the Virtual Box Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.