DSM 6.1.x Loader


Recommended Posts

For a HA cluster you need 2 NIC for each machine. And a HA makes no sense if you run it on the same hardware.

 

Hi,

 

Thank you for the fast response.

I have 2 Nics on my ESXI server.

The Cluster is just for testing purpuse only..

 

Dual nics are also added to both vm's..

Link to post
Share on other sites
I don't talk about VM. I talked from Xpenology. Your virtual NAS needs 2 NIC. Do you have assign 2 NICs to each NAS?

Take a look to the original doc. That shows in details how it's working

 

https://www.synology.com/en-global/know ... nology_NAS

 

Hi,

Thx for the response !

 

In my case, I have an ESXi server build with 2 Nics total.

Both VM's have 1 Nic for normal use, and second nic is added to be used with HA Cluster..

You mean i need a total of 4 Nics, ( 2 nics seperate for each VM ?)

 

What I read on older topics, is that i only need to ad a serial port..

This is what people say on multiple topics..

 

for example see this one : viewtopic.php?f=2&t=31616&p=96241&hilit=cluster#p96241

 

Search example : search.php?keywords=cluster

 

 

I'm a little confused, how to fix this problem..

thx for you help !

Link to post
Share on other sites

How to say it simple....mmmhhh

 

Each vm NAS need in total 2 NIC. This can be virtual and match always to the same physical NIC. Please read the Synology document for HA. If you don't see a second NIC in your Synology system network setup, HA will not work.

Link to post
Share on other sites
How to say it simple....mmmhhh

 

Each vm NAS need in total 2 NIC. This can be virtual and match always to the same physical NIC. Please read the Synology document for HA. If you don't see a second NIC in your Synology system network setup, HA will not work.

 

 

Hi yes,

I understand and I had read the manual..

I do have 2 nics fully working on both VM's..

 

But still its not working correctly, and the setup procedure of creating a cluster is failing..

Do I maybay need to do something with a serial port also ?

Link to post
Share on other sites

Just adding Thanks

Got 6.0.2 it to install, baremetal|n54l

Reset the root password using "synouser --setpw root [PASSWORD]"

and can now log in with WinSCP and edit the file "/etc.defaults/synoinfo. conf" to enable "support_syno_hybrid_raid ="yes" and thus my n54l is upgraded and working like a beast again!!

 

:grin:

Link to post
Share on other sites

Looks good. I only saw that you use different MTU size on LAN 2. If its not working after changing MTU, I have no clue why. It can be, that Syno saw the different network card at the same network because you use same vSwitch.

Link to post
Share on other sites
Looks good. I only saw that you use different MTU size on LAN 2. If its not working after changing MTU, I have no clue why. It can be, that Syno saw the different network card at the same network because you use same vSwitch.

 

Hi,

 

Yes about the MTU, it changed automaticully when trying to make the cluster..

It does do something with the other NIC of the other VM..

 

Going to check if I can find anymore info on the web.. :???::roll::roll:

Link to post
Share on other sites

v1.02a2 ds3617xs

Latest Boot log with "injected bnx B firmware" on Dell R710.

Looks like a few modules are still acting up(cnic, megaraid?)

attempted Install of DSM: 57% error 13

 

boot log  

 

  GNU GRUB  version 2.02~beta2-36ubuntu3.9

+----------------------------------------------------------------------------+
| DS3617xs 6.1 Baremetal with Jun's Mod v1.02-alpha                          |
|*DS3617xs 6.1 Baremetal with Jun's Mod v1.02-alpha Reinstall                |
| DS3617xs 6.1 VMWare/ESXI with Jun's Mod v1.02-alpha                        |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
+----------------------------------------------------------------------------+

     Use the ^ and v keys to select which entry is highlighted.
     Press enter to boot the selected OS, `e' to edit the commands
     before booting or `c' for a command-line.

                   GNU GRUB  version 2.02~beta2-36ubuntu3.9

+----------------------------------------------------------------------------+
|setparams 'DS3617xs 6.1 Baremetal with Jun'\''s Mod v1.02-alpha Reinstall'  |
|                                                                            |
|        set img=                                                            |
|        loadlinux 3617 usb mfg                                              |
|        loadinitrd                                                          |
|        showtips                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
+----------------------------------------------------------------------------+

     Minimum Emacs-like screen editing is supported. TAB lists
     completions. Press Ctrl-x or F10 to boot, Ctrl-c or F2 for
     a command-line or ESC to discard edits and return to the GRUB menu.
 Booting a command list
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.102 (root@build3) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15047 SMP Thu Feb 23 02:23:28 CST 2017
[    0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 SataPortMap=1 console=ttyS0,115200n8 withefi elevator=elevator syno_port_thaw=1 root=/dev/md0 sn=A8ODN02468 mac1=0011322CA603 mac2=0011322CA604 mac3=0011322CA605 mac4=0011322CA606 netif_num=4 vid=0xABCD pid=0x1234 mfg
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000010000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be767fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be768000-0x00000000be867fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000be868000-0x00000000be967fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be968000-0x00000000bea66fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bea67000-0x00000000bea6bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bea6c000-0x00000000beaebfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000beaec000-0x00000000bef11fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bef42000-0x00000000bef68fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf369000-0x00000000bf37efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf37f000-0x00000000bf3bdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf3be000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.10 by Dell Inc.
[    0.000000] efi:  ACPI 2.0=0xbea6b000  ACPI=0xbea6a000  SMBIOS=0xbea68000  MPS=0xbea67000
[    0.000000] efi: mem00: type=4, attr=0xf, range=[0x0000000000010000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem01: type=4, attr=0xf, range=[0x0000000000100000-0x0000000004000000) (63MB)
[    0.000000] efi: mem02: type=2, attr=0xf, range=[0x0000000004000000-0x0000000004d5c000) (13MB)
[    0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000004d5c000-0x0000000005000000) (2MB)
[    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000005000000-0x0000000005d5c000) (13MB)
[    0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000005d5c000-0x0000000037032000) (786MB)
[    0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000037032000-0x0000000037811000) (7MB)
[    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000037811000-0x000000008de75000) (1382MB)
[    0.000000] efi: mem08: type=2, attr=0xf, range=[0x000000008de75000-0x00000000bbe62000) (735MB)
[    0.000000] efi: mem09: type=4, attr=0xf, range=[0x00000000bbe62000-0x00000000bc067000) (2MB)
[    0.000000] efi: mem10: type=7, attr=0xf, range=[0x00000000bc067000-0x00000000bc08d000) (0MB)
[    0.000000] efi: mem11: type=1, attr=0xf, range=[0x00000000bc08d000-0x00000000bc0aa000) (0MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x00000000bc0aa000-0x00000000bc0c7000) (0MB)
[    0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000bc0c7000-0x00000000bd310000) (18MB)
[    0.000000] efi: mem14: type=3, attr=0xf, range=[0x00000000bd310000-0x00000000bd364000) (0MB)
[    0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000bd364000-0x00000000be568000) (18MB)
[    0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000be568000-0x00000000be581000) (0MB)
[    0.000000] efi: mem17: type=3, attr=0xf, range=[0x00000000be581000-0x00000000be768000) (1MB)
[    0.000000] efi: mem18: type=5, attr=0x800000000000000f, range=[0x00000000be768000-0x00000000be829000) (0MB)
[    0.000000] efi: mem19: type=5, attr=0x800000000000000f, range=[0x00000000be829000-0x00000000be868000) (0MB)
[    0.000000] efi: mem20: type=6, attr=0x800000000000000f, range=[0x00000000be868000-0x00000000be87b000) (0MB)
[    0.000000] efi: mem21: type=6, attr=0x800000000000000f, range=[0x00000000be87b000-0x00000000be968000) (0MB)
[    0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be968000-0x00000000bea5e000) (0MB)
[    0.000000] efi: mem23: type=2, attr=0xf, range=[0x00000000bea5e000-0x00000000bea67000) (0MB)
[    0.000000] efi: mem24: type=10, attr=0xf, range=[0x00000000bea67000-0x00000000bea6c000) (0MB)
[    0.000000] efi: mem25: type=9, attr=0xf, range=[0x00000000bea6c000-0x00000000beaec000) (0MB)
[    0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000beaec000-0x00000000bef12000) (4MB)
[    0.000000] efi: mem27: type=4, attr=0x8, range=[0x00000000bef42000-0x00000000bef43000) (0MB)
[    0.000000] efi: mem28: type=3, attr=0x8, range=[0x00000000bef43000-0x00000000bef5a000) (0MB)
[    0.000000] efi: mem29: type=4, attr=0x8, range=[0x00000000bef5a000-0x00000000bef5c000) (0MB)
[    0.000000] efi: mem30: type=3, attr=0x8, range=[0x00000000bef5c000-0x00000000bef69000) (0MB)
[    0.000000] efi: mem31: type=0, attr=0x1, range=[0x00000000bf369000-0x00000000bf37f000) (0MB)
[    0.000000] efi: mem32: type=9, attr=0x8, range=[0x00000000bf37f000-0x00000000bf3be000) (0MB)
[    0.000000] efi: mem33: type=0, attr=0x1, range=[0x00000000bf3be000-0x00000000c0000000) (12MB)
[    0.000000] efi: mem34: type=0, attr=0x1, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] efi: mem35: type=0, attr=0x1, range=[0x00000000fe000000-0x0000000100000000) (32MB)
[    0.000000] efi: mem36: type=7, attr=0xf, range=[0x0000000100000000-0x0000000840000000) (29696MB)
[    0.000000] SMBIOS 2.6 present.
[    0.000000] e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
[    0.000000] e820: last_pfn = 0xbef69 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x83fe00000-0x83fffffff]
[    0.000000] init_memory_mapping: [mem 0x83c000000-0x83fdfffff]
[    0.000000] init_memory_mapping: [mem 0x800000000-0x83bffffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbe767fff]
[    0.000000] init_memory_mapping: [mem 0xbe968000-0xbea66fff]
[    0.000000] init_memory_mapping: [mem 0xbeaec000-0xbef11fff]
[    0.000000] init_memory_mapping: [mem 0xbef42000-0xbef68fff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[    0.000000] RAMDISK: [mem 0x37032000-0x37810fff]
[    0.000000] ACPI: RSDP 0x00000000BEA6B000 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000000F1254 0009C (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: FACP 0x00000000BF3A3F9C 000F4 (v03 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: DSDT 0x00000000BF37F000 03DD0 (v01 DELL   PE_SC3   00000001 INTL 20050624)
[    0.000000] ACPI: FACS 0x00000000BF3A6000 00040
[    0.000000] ACPI: APIC 0x00000000BF3A3478 0015E (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SPCR 0x00000000BF3A35D8 00050 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: HPET 0x00000000BF3A362C 00038 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: DMAR 0x00000000BF3A3668 001B0 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: MCFG 0x00000000BF3A38C4 0003C (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: WD__ 0x00000000BF3A3904 00134 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SLIC 0x00000000BF3A3A3C 00176 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: ERST 0x00000000BF382F70 00270 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: HEST 0x00000000BF3831E0 003A8 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: BERT 0x00000000BF382DD0 00030 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: EINJ 0x00000000BF382E00 00170 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SRAT 0x00000000BF3A3BC0 00370 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: TCPA 0x00000000BF3A3F34 00064 (v02 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SSDT 0x00000000BF3A7000 04A24 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x83fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0xbe767fff]
[    0.000000]   node   0: [mem 0xbe968000-0xbea66fff]
[    0.000000]   node   0: [mem 0xbeaec000-0xbef11fff]
[    0.000000]   node   0: [mem 0xbef42000-0xbef68fff]
[    0.000000]   node   0: [mem 0x100000000-0x83fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[    0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: 32 Processors exceeds NR_CPUS limit of 16
[    0.000000] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000be768000 - 00000000be868000
[    0.000000] PM: Registered nosave memory: 00000000be868000 - 00000000be968000
[    0.000000] PM: Registered nosave memory: 00000000bea67000 - 00000000bea6c000
[    0.000000] PM: Registered nosave memory: 00000000bea6c000 - 00000000beaec000
[    0.000000] PM: Registered nosave memory: 00000000bef12000 - 00000000bef42000
[    0.000000] PM: Registered nosave memory: 00000000bef69000 - 00000000bf369000
[    0.000000] PM: Registered nosave memory: 00000000bf369000 - 00000000bf37f000
[    0.000000] PM: Registered nosave memory: 00000000bf37f000 - 00000000bf3be000
[    0.000000] PM: Registered nosave memory: 00000000bf3be000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[    0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 24 pages/cpu @ffff88083fc00000 s69312 r8192 d20800 u131072
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8265086
[    0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 SataPortMap=1 console=ttyS0,115200n8 withefi elevator=elevator syno_port_thaw=1 root=/dev/md0 sn=A8ODN02468 mac1=0011322CA603 mac2=0011322CA604 mac3=0011322CA605 mac4=0011322CA606 netif_num=4 vid=0xABCD pid=0x1234 mfg
[    0.000000] Power on seq num: 0
[    0.000000] Synology Hardware Version: DS3617xs-j
[    0.000000] Vender format version: 2
[    0.000000] Sata Port Map: 1
[    0.000000] Serial Number: A8ODN02468
[    0.000000] Mac1: 0011322CA603
[    0.000000] Mac2: 0011322CA604
[    0.000000] Mac3: 0011322CA605
[    0.000000] Mac4: 0011322CA606
[    0.000000] Internal netif num: 4
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.000000] Memory: 32828876k/34603008k available (4799k kernel code, 1068784k absent, 705348k reserved, 3807k data, 760k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:1352 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 134217728 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.002000] tsc: Detected 2792.872 MHz processor
[  mem 0xbe768000-0xbe867fff]
[    0.020910] init_memory_mapping: [mem 0xbe868000-0xbe967fff]
[    0.029427] Security Framework initialized
[    0.033530] AppArmor: AppArmor initialized
[    0.037630] Mount-cache hash table entries: 256
[    0.042314] Initializing cgroup subsys memory
[    0.046677] Initializing cgroup subsys devices
[    0.051117] Initializing cgroup subsys freezer
[    0.055557] Initializing cgroup subsys blkio
[    0.059842] CPU: Physical Processor ID: 1
[    0.063848] CPU: Processor Core ID: 0
[    0.067508] mce: CPU supports 9 MCE banks
[    0.071522] CPU0: Thermal monitoring enabled (TM1)
[    0.076315] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.076315] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.076315] tlb_flushall_shift: 6
[    0.090796] Freeing SMP alternatives: 24k freed
[    0.095329] ACPI: Core revision 20130328
[    0.100275] ACPI: All ACPI Tables successfully acquired
[    0.108534] dmar: Host address width 40
[    0.112369] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[    0.117681] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020f6
[    0.125766] dmar: RMRR base: 0x000000bf4c8000 end: 0x000000bf4dffff
[    0.132028] dmar: RMRR base: 0x000000bf4b1000 end: 0x000000bf4bffff
[    0.138291] dmar: RMRR base: 0x000000bf4a1000 end: 0x000000bf4a1fff
[    0.144552] dmar: RMRR base: 0x000000bf4a3000 end: 0x000000bf4a3fff
[    0.150815] dmar: RMRR base: 0x000000bf4a5000 end: 0x000000bf4a5fff
[    0.157077] dmar: RMRR base: 0x000000bf4a7000 end: 0x000000bf4a7fff
[    0.163340] dmar: RMRR base: 0x000000bf4c0000 end: 0x000000bf4c0fff
[    0.169602] dmar: RMRR base: 0x000000bf4c2000 end: 0x000000bf4c2fff
[    0.175864] dmar: ATSR flags: 0x0
[    0.179274] This system BIOS has enabled interrupt remapping
[    0.179274] on a chipset that contains an erratum making that
[    0.179274] feature unstable.  To maintain system stability
[    0.179274] interrupt remapping is being disabled.  Please
[    0.179274] contact your BIOS vendor for an update
[    0.206508] Switched APIC routing to physical flat.
[    0.211900] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.227908] smpboot: CPU0: Intel(R) Xeon(R) CPU           X5560  @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[    0.339729] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[    0.348023] perf_event_intel: CPU erratum AAJ80 worked around
[    0.353758] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.360623] ... version:                3
[    0.364623] ... bit width:              48
[    0.368711] ... generic registers:      4
[    0.372711] ... value mask:             0000ffffffffffff
[    0.378014] ... max period:             000000007fffffff
[    0.383316] ... fixed-purpose events:   3
[    0.387316] ... event mask:             000000070000000f
[    0.392842] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 OK
[    0.680040] Brought up 16 CPUs
[    0.683091] smpboot: Total of 16 processors activated (89366.73 BogoMIPS)
[    0.699165] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.707582] devtmpfs: initialized
[    0.711122] PM: Registering ACPI NVS region [mem 0xbea67000-0xbea6bfff] (20480 bytes)
[    0.719105] xor: measuring software checksum speed
[    0.733058]    prefetch64-sse: 11516.000 MB/sec
[    0.747069]    generic_sse: 10164.000 MB/sec
[    0.751332] xor: using function: prefetch64-sse (11516.000 MB/sec)
[    0.757568] NET: Registered protocol family 16
[    0.762486] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.770046] ACPI: bus type PCI registered
[    0.774172] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.783469] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.790451] PCI: Using configuration type 1 for base access
[    0.801574] bio: create slab  at 0
[    0.822333] raid6: sse2x1   gen()  6835 MB/s
[    0.843348] raid6: sse2x1   xor()  5351 MB/s
[    0.864365] raid6: sse2x2   gen()  8074 MB/s
[    0.885380] raid6: sse2x2   xor()  6220 MB/s
[    0.906398] raid6: sse2x4   gen()  8925 MB/s
[    0.927419] raid6: sse2x4   xor()  6896 MB/s
[    0.931682] raid6: using algorithm sse2x4 gen() (8925 MB/s)
[    0.937245] raid6: .... xor() 6896 MB/s, rmw enabled
[    0.942201] raid6: using ssse3x2 recovery algorithm
[    0.947134] ACPI: Added _OSI(Module Device)
[    0.951310] ACPI: Added _OSI(Processor Device)
[    0.955747] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.960442] ACPI: Added _OSI(Processor Aggregator Device)
[    0.966806] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.974355] ACPI: Interpreter enabled
[    0.978017] ACPI: (supports S0 S4 S5)
[    0.981673] ACPI: Using IOAPIC for interrupt routing
[    0.986676] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.995831] ACPI: No dock devices found.
[    1.005888] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.012288] PCI host bridge to bus 0000:00
[    1.016381] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.021858] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.028029] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.034200] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.041064] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff]
[    1.047931] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    1.057279] pci 0000:00:1f.0: address space collision: [io  0x0800-0x087f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000800-0x00000803 flags 0x80000000]
[    1.070916] pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH6 GPIO
[    1.078043] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[    1.085605] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[    1.093165] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[    1.103725] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.111747] pci 0000:00:03.0: PCI bridge to [bus 02]
[    1.119761] pci 0000:00:04.0: PCI bridge to [bus 03]
[    1.124786] pci 0000:00:05.0: PCI bridge to [bus 04]
[    1.129807] pci 0000:00:06.0: PCI bridge to [bus 05]
[    1.134843] pci 0000:00:07.0: PCI bridge to [bus 06]
[    1.139867] pci 0000:00:09.0: PCI bridge to [bus 07]
[    1.145060] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[    1.151958] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    1.158105] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    1.164948] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[    1.171878] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[    1.178803] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[    1.185729] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[    1.192656] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[    1.199583] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[    1.206513] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    1.214585] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[    1.221531] ACPI: Enabled 1 GPEs in block 00 to 3F
[    1.226511] vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none
[    1.234591] vgaarb: loaded
[    1.237291] vgaarb: bridge control possible 0000:08:03.0
[    1.242768] SCSI subsystem initialized
[    1.246512] ACPI: bus type ATA registered
[    1.250757] pps_core: LinuxPPS API ver. 1 registered
[    1.255713] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    1.264860] PTP clock support registered
[    1.268914] PCI: Using ACPI for IRQ routing
[    1.278387] PCI: Discovered peer bus fe
[    1.282251] PCI host bridge to bus 0000:fe
[    1.286345] pci_bus 0000:fe: root bus resource [io  0x0000-0xffff]
[    1.292516] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
[    1.299556] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
[    1.308763] PCI: Discovered peer bus ff
[    1.312632] PCI host bridge to bus 0000:ff
[    1.316725] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    1.322897] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
[    1.329936] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    1.339533] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    1.347127] Switching to clocksource hpet
[    1.351296] AppArmor: AppArmor Filesystem Enabled
[    1.356068] pnp: PnP ACPI init
[    1.359130] ACPI: bus type PNP registered
[    1.364840] system 00:06: [io  0x0800-0x087f] could not be reserved
[    1.371102] system 00:06: [io  0x0880-0x08ff] could not be reserved
[    1.377363] system 00:06: [io  0x0900-0x091f] has been reserved
[    1.383276] system 00:06: [io  0x0920-0x0923] has been reserved
[    1.389189] system 00:06: [io  0x0924] has been reserved
[    1.394493] system 00:06: [io  0x0c00-0x0c7f] has been reserved
[    1.400406] system 00:06: [io  0x0ca0-0x0ca7] has been reserved
[    1.406319] system 00:06: [io  0x0ca9-0x0cab] has been reserved
[    1.412231] system 00:06: [io  0x0cad-0x0caf] has been reserved
[    1.418255] system 00:07: [io  0x0ca8] has been reserved
[    1.423561] system 00:07: [io  0x0cac] has been reserved
[    1.429522] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    1.436309] system 00:0a: [mem 0xfed90000-0xfed91fff] could not be reserved
[    1.443399] pnp: PnP ACPI: found 11 devices
[    1.447576] ACPI: bus type PNP unregistered
[    1.461242] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
[    1.468372] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.473334] pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xd9ffffff]
[    1.480119] pci 0000:00:03.0: PCI bridge to [bus 02]
[    1.485079] pci 0000:00:03.0:   bridge window [mem 0xda000000-0xddffffff]
[    1.491864] pci 0000:00:04.0: PCI bridge to [bus 03]
[    1.496822] pci 0000:00:04.0:   bridge window [io  0xf000-0xffff]
[    1.502912] pci 0000:00:04.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    1.509696] pci 0000:00:05.0: PCI bridge to [bus 04]
[    1.514659] pci 0000:00:06.0: PCI bridge to [bus 05]
[    1.519623] pci 0000:00:07.0: PCI bridge to [bus 06]
[    1.524586] pci 0000:00:09.0: PCI bridge to [bus 07]
[    1.529552] pci 0000:08:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
[    1.536767] pci 0000:00:1e.0: PCI bridge to [bus 08]
[    1.541728] pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdeffffff]
[    1.548511] pci 0000:00:1e.0:   bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
[    1.557608] NET: Registered protocol family 2
[    1.562252] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    1.570347] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.577213] TCP: Hash tables configured (established 262144 bind 65536)
[    1.583843] TCP: reno registered
[    1.587074] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    1.593348] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    1.600173] NET: Registered protocol family 1
[    1.604675] RPC: Registered named UNIX socket transport module.
[    1.610589] RPC: Registered udp transport module.
[    1.615288] RPC: Registered tcp transport module.
[    1.619985] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.628656] Trying to unpack rootfs image as initramfs...
[    3.039241] Freeing initrd memory: 8060k freed
[    3.045356] IOMMU 0 0xfed90000: using Queued invalidation
[    3.050767] IOMMU passthrough mode = 1
[    3.054535] IOMMU: hardware identity mapping for device 0000:00:00.0
[    3.060886] IOMMU: hardware identity mapping for device 0000:00:01.0
[    3.067234] IOMMU: hardware identity mapping for device 0000:00:03.0
[    3.073580] IOMMU: hardware identity mapping for device 0000:00:04.0
[    3.079928] IOMMU: hardware identity mapping for device 0000:00:05.0
[    3.086275] IOMMU: hardware identity mapping for device 0000:00:06.0
[    3.092622] IOMMU: hardware identity mapping for device 0000:00:07.0
[    3.098970] IOMMU: hardware identity mapping for device 0000:00:09.0
[    3.105315] IOMMU: hardware identity mapping for device 0000:00:14.0
[    3.111663] IOMMU: hardware identity mapping for device 0000:00:14.1
[    3.118011] IOMMU: hardware identity mapping for device 0000:00:14.2
[    3.124356] IOMMU: hardware identity mapping for device 0000:00:1a.0
[    3.130703] IOMMU: hardware identity mapping for device 0000:00:1a.1
[    3.137050] IOMMU: hardware identity mapping for device 0000:00:1a.7
[    3.143398] IOMMU: hardware identity mapping for device 0000:00:1d.0
[    3.149743] IOMMU: hardware identity mapping for device 0000:00:1d.1
[    3.156090] IOMMU: hardware identity mapping for device 0000:00:1d.7
[    3.162438] IOMMU: hardware identity mapping for device 0000:00:1f.0
[    3.168786] IOMMU: hardware identity mapping for device 0000:00:1f.2
[    3.175139] IOMMU: hardware identity mapping for device 0000:01:00.0
[    3.181484] IOMMU: hardware identity mapping for device 0000:01:00.1
[    3.187838] IOMMU: hardware identity mapping for device 0000:02:00.0
[    3.194187] IOMMU: hardware identity mapping for device 0000:02:00.1
[    3.200541] IOMMU: hardware identity mapping for device 0000:03:00.0
[    3.206896] IOMMU: hardware identity mapping for device 0000:fe:00.0
[    3.213242] IOMMU: hardware identity mapping for device 0000:fe:00.1
[    3.219591] IOMMU: hardware identity mapping for device 0000:fe:02.0
[    3.225938] IOMMU: hardware identity mapping for device 0000:fe:02.1
[    3.232285] IOMMU: hardware identity mapping for device 0000:fe:02.4
[    3.238632] IOMMU: hardware identity mapping for device 0000:fe:02.5
[    3.244977] IOMMU: hardware identity mapping for device 0000:fe:03.0
[    3.251324] IOMMU: hardware identity mapping for device 0000:fe:03.1
[    3.257669] IOMMU: hardware identity mapping for device 0000:fe:03.2
[    3.264016] IOMMU: hardware identity mapping for device 0000:fe:03.4
[    3.270363] IOMMU: hardware identity mapping for device 0000:fe:04.0
[    3.276711] IOMMU: hardware identity mapping for device 0000:fe:04.1
[    3.283058] IOMMU: hardware identity mapping for device 0000:fe:04.2
[    3.289404] IOMMU: hardware identity mapping for device 0000:fe:04.3
[    3.295753] IOMMU: hardware identity mapping for device 0000:fe:05.0
[    3.302099] IOMMU: hardware identity mapping for device 0000:fe:05.1
[    3.308446] IOMMU: hardware identity mapping for device 0000:fe:05.2
[    3.314792] IOMMU: hardware identity mapping for device 0000:fe:05.3
[    3.321139] IOMMU: hardware identity mapping for device 0000:fe:06.0
[    3.327487] IOMMU: hardware identity mapping for device 0000:fe:06.1
[    3.333833] IOMMU: hardware identity mapping for device 0000:fe:06.2
[    3.340180] IOMMU: hardware identity mapping for device 0000:fe:06.3
[    3.346534] IOMMU: hardware identity mapping for device 0000:ff:00.0
[    3.352881] IOMMU: hardware identity mapping for device 0000:ff:00.1
[    3.359227] IOMMU: hardware identity mapping for device 0000:ff:02.0
[    3.365572] IOMMU: hardware identity mapping for device 0000:ff:02.1
[    3.371920] IOMMU: hardware identity mapping for device 0000:ff:02.4
[    3.378268] IOMMU: hardware identity mapping for device 0000:ff:02.5
[    3.384616] IOMMU: hardware identity mapping for device 0000:ff:03.0
[    3.390963] IOMMU: hardware identity mapping for device 0000:ff:03.1
[    3.397308] IOMMU: hardware identity mapping for device 0000:ff:03.2
[    3.403655] IOMMU: hardware identity mapping for device 0000:ff:03.4
[    3.410002] IOMMU: hardware identity mapping for device 0000:ff:04.0
[    3.416349] IOMMU: hardware identity mapping for device 0000:ff:04.1
[    3.422696] IOMMU: hardware identity mapping for device 0000:ff:04.2
[    3.429045] IOMMU: hardware identity mapping for device 0000:ff:04.3
[    3.435393] IOMMU: hardware identity mapping for device 0000:ff:05.0
[    3.441739] IOMMU: hardware identity mapping for device 0000:ff:05.1
[    3.448086] IOMMU: hardware identity mapping for device 0000:ff:05.2
[    3.454433] IOMMU: hardware identity mapping for device 0000:ff:05.3
[    3.460778] IOMMU: hardware identity mapping for device 0000:ff:06.0
[    3.467125] IOMMU: hardware identity mapping for device 0000:ff:06.1
[    3.473471] IOMMU: hardware identity mapping for device 0000:ff:06.2
[    3.479816] IOMMU: hardware identity mapping for device 0000:ff:06.3
[    3.486162] IOMMU: Setting RMRR:
[    3.489385] Ignoring identity map for HW passthrough device 0000:00:1d.7 [0xbf4c2000 - 0xbf4c2fff]
[    3.498334] Ignoring identity map for HW passthrough device 0000:00:1a.7 [0xbf4c0000 - 0xbf4c0fff]
[    3.507284] Ignoring identity map for HW passthrough device 0000:00:1d.1 [0xbf4a7000 - 0xbf4a7fff]
[    3.516232] Ignoring identity map for HW passthrough device 0000:00:1d.0 [0xbf4a5000 - 0xbf4a5fff]
[    3.525181] Ignoring identity map for HW passthrough device 0000:00:1a.1 [0xbf4a3000 - 0xbf4a3fff]
[    3.534130] Ignoring identity map for HW passthrough device 0000:00:1a.0 [0xbf4a1000 - 0xbf4a1fff]
[    3.543080] Ignoring identity map for HW passthrough device 0000:00:1a.0 [0xbf4b1000 - 0xbf4bffff]
[    3.552029] Ignoring identity map for HW passthrough device 0000:00:1a.1 [0xbf4b1000 - 0xbf4bffff]
[    3.560979] Ignoring identity map for HW passthrough device 0000:00:1d.0 [0xbf4b1000 - 0xbf4bffff]
[    3.569927] Ignoring identity map for HW passthrough device 0000:00:1d.1 [0xbf4b1000 - 0xbf4bffff]
[    3.578877] Ignoring identity map for HW passthrough device 0000:00:1a.7 [0xbf4c8000 - 0xbf4dffff]
[    3.587827] Ignoring identity map for HW passthrough device 0000:00:1d.7 [0xbf4c8000 - 0xbf4dffff]
[    3.596776] IOMMU: Prepare 0-16MiB unity mapping for LPC
[    3.602081] Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
[    3.610279] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[    3.627800] audit: initializing netlink socket (disabled)
[    3.633226] type=2000 audit(1493048630.197:1): initialized
[    3.639410] bounce pool size: 64 pages
[    3.643522] VFS: Disk quotas dquot_6.5.2
[    3.647508] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.654596] NFS: Registering the id_resolver key type
[    3.659651] Key type id_resolver registered
[    3.663827] Key type id_legacy registered
[    3.667839] msgmni has been set to 32768
[    3.671958] async_tx: api initialized (async)
[    3.676417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.683806] io scheduler noop registered
[    3.687724] io scheduler deadline registered
[    3.692032] io scheduler cfq registered
[    3.823585] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.850575] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.877254] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    3.893059] brd: module loaded
[    3.897200] Unknown LPC device 2918
[    3.901058] Loading iSCSI transport class v2.0-870.
[    3.907044] rdac: device handler registered
[    3.912343] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.922085] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.927066] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.932228] rtc_cmos 00:03: RTC can wake from S4
[    3.937077] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.943191] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    3.950760] i2c /dev entries driver
[    3.954736] md: linear personality registered for level -1
[    3.960218] md: raid0 personality registered for level 0
[    3.965524] md: raid1 personality registered for level 1
[    3.970831] md: raid10 personality registered for level 10
[    3.976436] md: raid6 personality registered for level 6
[    3.981743] md: raid5 personality registered for level 5
[    3.987051] md: raid4 personality registered for level 4
[    3.992358] md: raidF1 personality registered for level 45
[    3.998027] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    4.006458] cpuidle: using governor ladder
[    4.010548] cpuidle: using governor menu
[    4.014470] EFI Variables Facility v0.08 2004-May-17
[    4.022130] TCP: cubic registered
[    4.025447] NET: Registered protocol family 17
[    4.029919] Key type dns_resolver registered
[    4.038201] registered taskstats version 1
[    4.042739] rtc_cmos 00:03: setting system clock to 2017-04-24 15:43:52 UTC (1493048632)
[    4.051458] Freeing unused kernel memory: 760k freed
[    4.056565] Write protecting the kernel read-only data: 8192k
[    4.062480] Freeing unused kernel memory: 1336k freed
[    4.068540] Freeing unused kernel memory: 504k freed
patching file etc/passwd
patching file etc/rc
patching file etc/synoinfo.conf
patching file linuxrc.syno
patching file usr/sbin/init.post
START /linuxrc.syno
Insert Marvell 1475 SATA controller driver
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading modul[    4.113500] ACPI: bus type USB registered
e usbcore[    4.118277] usbcore: registered new interface driver usbfs
[    4.124421] usbcore: registered new interface driver hub
[    4.129852] usbcore: registered new interface driver ethub
[    4.135443] usbcore: registered new device driver usb
... [  OK  ]
:: Loading modul[    4.153253] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
e ohci-hcd ... [  OK  ]
:: Loading modul[    4.163758] uhci_hcd: USB Universal Host Controller Interface driver
e uhci-hcd[    4.171090] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.176914] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.184334] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
[    4.190082] 32bit 0000:00:1a.0 uses non-identity mapping
[    4.195674] hub 1-0:1.0: USB hub found
[    4.199422] hub 1-0:1.0: 2 ports detected
[    4.203655] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.208876] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    4.216291] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
[    4.222039] 32bit 0000:00:1a.1 uses non-identity mapping
[    4.227611] hub 2-0:1.0: USB hub found
[    4.231360] hub 2-0:1.0: 2 ports detected
[    4.235585] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.240809] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    4.248224] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
[    4.253969] 32bit 0000:00:1d.0 uses non-identity mapping
[    4.259536] hub 3-0:1.0: USB hub found
[    4.263284] hub 3-0:1.0: 2 ports detected
[    4.267511] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.272733] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    4.280149] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[    4.285896] 32bit 0000:00:1d.1 uses non-identity mapping
[    4.291474] hub 4-0:1.0: USB hub found
[    4.295222] hub 4-0:1.0: 2 ports detected
... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module etxhci-hcd ... [  OK  ]
:: Loading modul[    4.323133] usbcore: registered new interface driver usb-storage
e usb-storage ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading modul[    4.341748] VMware PVSCSI driver - version 1.0.2.0-k
e vmw_pvscsi ... [  OK  ]
:: Loading modul[    4.350998] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
e megaraid_mm ... [  OK  ]
:: Loading modul[    4.362773] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
e megaraid_mbox ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading mo[    4.381752] Fusion MPT base driver 3.04.20
[    4.386777] Copyright (c) 1999-2008 LSI Corporation
dule mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading modul[    4.398937] Fusion MPT SPI Host driver 3.04.20
e mptspi ... [  OK  ]
:: Loading modul[    4.407750] Fusion MPT SAS Host driver 3.04.20
e mptsas ... [  OK  ]
:: Loading modul[    4.416464] Fusion MPT misc device (ioctl) driver 3.04.20
e mptctl[    4.422663] mptctl: Registered with Fusion MPT base driver
[    4.428719] mptctl: /dev/mptctl @ (major,minor=10,220)
... [  OK  ]
:: Loading modul[    4.437801] ata_piix 0000:00:1f.2: MAP [
e ata_piix[    4.442133]  P0 -- P1 -- ]
[    4.596461] 32bit 0000:00:1f.2 uses non-identity mapping
[    4.602338] scsi0 : ata_piix
[    4.605498] scsi1 : ata_piix
[    4.608590] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
[    4.615720] ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
[    4.622503] tsc: Refined TSC clocksource calibration: 2792.997 MHz
[    4.622505] Switching to clocksource tsc
[    5.088959] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.098063] ata1.00: ATAPI: TEAC DVD-ROM DV28SV, D.0L, max UDMA/100
[    5.142102] ata1.00: configured for UDMA/100
[    5.152443] ata1.00: Find SSD disks. [TEAC DVD-ROM DV28SV]
[    5.157949] I/O scheduler elevator not found
[    5.181429] scsi 0:0:0:0: CD-ROM            TEAC     DVD-ROM DV28SV           D.0L PQ: 0 ANSI: 5
[    5.640477] ata2: failed to resume link (SControl 0)
[    5.656144] ata2: SATA link down (SStatus 4 SControl 0)
... [  OK  ]
:: Loading modul[    5.665193] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
e megaraid_sas[    5.672068] megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 3:slot 0:func 0
[    5.679813] 32bit 0000:03:00.0 uses non-identity mapping
[    5.685152] megasas: FW now in Ready state
[    5.731562] megasas_init_mfi: fw_support_ieee=0
[    5.735912] megasas: INIT adapter done
[    5.802652] scsi2 : LSI SAS based MegaRAID driver
[    5.807537] I/O scheduler elevator not found
[    5.828258] scsi 2:0:0:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.837060] I/O scheduler elevator not found
[    5.857701] scsi 2:0:1:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.866495] I/O scheduler elevator not found
[    5.887164] scsi 2:0:2:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.895957] I/O scheduler elevator not found
[    5.916554] scsi 2:0:3:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.925348] I/O scheduler elevator not found
[    5.946091] scsi 2:0:4:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.954883] I/O scheduler elevator not found
[    5.975579] scsi 2:0:5:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.984371] I/O scheduler elevator not found
[    5.988702] I/O scheduler elevator not found
[    5.993023] I/O scheduler elevator not found
[    5.997347] I/O scheduler elevator not found
[    6.001672] I/O scheduler elevator not found
[    6.005995] I/O scheduler elevator not found
[    6.010315] I/O scheduler elevator not found
[    6.014641] I/O scheduler elevator not found
[    6.018960] I/O scheduler elevator not found
[    6.023281] I/O scheduler elevator not found
[    6.027602] I/O scheduler elevator not found
[    6.031926] I/O scheduler elevator not found
[    6.036245] I/O scheduler elevator not found
[    6.040571] I/O scheduler elevator not found
[    6.044892] I/O scheduler elevator not found
[    6.049213] I/O scheduler elevator not found
[    6.053537] I/O scheduler elevator not found
[    6.057858] I/O scheduler elevator not found
[    6.062178] I/O scheduler elevator not found
[    6.066505] I/O scheduler elevator not found
[    6.070826] I/O scheduler elevator not found
[    6.075147] I/O scheduler elevator not found
[    6.079472] I/O scheduler elevator not found
[    6.083795] I/O scheduler elevator not found
[    6.088115] I/O scheduler elevator not found
[    6.092442] I/O scheduler elevator not found
[    6.096764] I/O scheduler elevator not found
[    6.141805] dmar: DRHD: handling fault status reg 2
[    6.146677] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe88000
[    6.146677] DMAR:[fault reason 06] PTE Read access is not set
[    6.219903] dmar: DRHD: handling fault status reg 102
[    6.224947] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe8a000
[    6.224947] DMAR:[fault reason 06] PTE Read access is not set
[    6.259734] dmar: DRHD: handling fault status reg 202
[    6.264778] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe89000
[    6.264778] DMAR:[fault reason 06] PTE Read access is not set
[    6.325795] dmar: DRHD: handling fault status reg 302
[    6.330840] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe8a000
[    6.330840] DMAR:[fault reason 06] PTE Read access is not set
[    6.343873] scsi 2:0:32:0: Enclosure         DP       BACKPLANE                1.07 PQ: 0 ANSI: 5
[    6.352919] ses 2:0:32:0: Attached Enclosure device
[    6.449463] dmar: DRHD: handling fault status reg 402
[    6.454509] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe86000
[    6.454509] DMAR:[fault reason 06] PTE Read access is not set
[    6.467544] ses 2:0:32:0: Wrong diagnostic page; asked for 7 got 0
[    6.836601] dmar: DRHD: handling fault status reg 502
[    6.841647] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe8a000
[    6.841647] DMAR:[fault reason 06] PTE Read access is not set
[    6.854702] I/O scheduler elevator not found



[    7.818872] I/O scheduler elevator not found
[    7.823306] scsi 2:2:0:0: Direct-Access     DELL     PERC 6/i                 1.22 PQ: 0 ANSI: 5
[    7.832396] sd 2:2:0:0: [sdc] 2924216320 512-byte logical blocks: (1.49 TB/1.36 TiB)
[    7.840234] sd 2:2:0:0: [sdc] Write Protect is off
[    7.845080] sd 2:2:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    7.860550]  sdc: sdc1 sdc2 sdc3
[    7.864317] sd 2:2:0:0: [sdc] Attached SCSI disk
[    7.891801] dmar: DRHD: handling fault status reg 602
[    7.896848] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe83000
[    7.896848] DMAR:[fault reason 06] PTE Read access is not set
[    7.909895] ses 2:0:32:0: Wrong diagnostic pa7.981153] I/O scheduler elevator not found
[    7.985475] I/O scheduler elevator not found



[    8.821207] I/O scheduler elevator not found
[    8.82201
[    9.057697] Brand: Synology
[    9.060507] Model: DS-3617xs
[    9.063391] set group disks wakeup number to 4, spinup time deno 7
[    9.069563] synobios cpu_arch proc entry initialized
[    9.074518] synobios crypto_hw proc entry initialized
[    9.079562] synobios syno_platform proc entry initialized
Starting /usr/syno/bin/synocfgen...
/usr/syno/b[    9.088823] synobios: unload
in/synocfgen returns 0
[    9.097913] md: Autodetecting RAID arrays.
[    9.108269] md: deny sdc1.
[    9.110978] md: export_rdev(sdc1)
[    9.119206] md: deny sdc2.
[    9.121909] md: export_rdev(sdc2)
[    9.133200] md: invalid raid superblock magic on sdc3
[    9.138246] md: sdc3 does not have a valid v0.90 superblock, not importing!
[    9.145201] md: Scanned 3 and added 0 devices.
[    9.149639] md: autorun ...
[    9.152425] md: ... autorun DONE.
Partition Version=0
Partition layout is not DiskStation style.
NOT EXECUTE /sbin/e2fsck.
Mounting /dev/md0 /tmpRoot
mount: lseek failed, msg:Invalid argument
mount: mounting /dev/md0 on /tmpRoot failed: No such device
mount /dev/md0 fail, returns
Exit on error [3] no init exists...
Mon Apr 24 15:43:59 UTC 2017
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=16469668k,nr_inodes=4117417,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 3
starting pid 4390, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
mdadm: error opening /dev/md1: No such file or directory
rc: Use all internal disk as swap.
/etc/rc: line 106: sed: not found
/etc/rc: line 106: /usr/syno/sbin/synostgsysraid: not found
/etc/rc: line 106: sed: not found
rc: No assigned swap disk (sdc2) can be assembled, use all instead.
rc: Use all internal disk as swap.
/etc/rc: line 106: sed: not found
/etc/rc: line 106: /usr/syno/sbin/synostgsysraid: not found
/etc/rc: line 106: sed: not found
rc: No disk (sdc2) can be assembled.
swapon: can't stat '/dev/md1': No such file or directory
:: Loading modul[   11.281377] scsi 0:0:0:0: Attached scsi generic sg0 type 5
e sg[   11.287395] ses 2:0:32:0: Attached scsi generic sg1 type 13
[   11.293286] sd 2:2:0:0: Attached scsi generic sg2 type 0
... [  OK  ]
:: Loading module mdio ... [  OK  ]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading modul[   11.368203] dca service started, version 1.12.1
e dca ... [  OK  ]
:: Loading modul[   11.377293] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[   11.383781] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
e e1000e ... [  OK  ]
:: Loading module i2c-algo-bit ... [  OK  ]
:: Loading modul[   11.397174] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
e igb[   11.404494] Copyright (c) 2007-2015 Intel Corporation.
... [  OK  ]
:: Loading modul[   11.415121] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6
e ixgbe[   11.422345] Copyright(c) 1999 - 2016 Intel Corporation.
[   11.428192] ixgbe unsupported_sfp_notify proc entry initialized
... [  OK  ]
:: Loading module libcrc32c ... [  OK  ]
:: Loading module mii ... [  OK  ]
:: Loading module libphy ... [  OK  ]
:: Loading module atl1 ... [  OK  ]
:: Loading module atl1e ... [  OK  ]
:: Loading module atl1c ... [  OK  ]
:: Loading module alx ... [  OK  ]
:: Loading module uio ... [  OK  ]
:: Loading module ipg ... [  OK  ]
:: Loading modul[   11.479917] jme: JMicron JMC2XX ethernet driver version 1.0.8
e jme ... [  OK  ]
:: Loading module skge ... [  OK  ]
:: Loading modul[   11.493770] sky2: driver version 1.30
e sky2 ... [  OK  ]
:: Loading module ptp_pch ... [  OK  ]
:: Loading modul[   11.505544] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
e pch_gbe ... [  OK  ]
:: Loading module qla3xxx ... [  OK  ]
:: Loading modul[   11.520372] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
e qlcnic ... [  OK  ]
:: Loading module qlge ... [  OK  ]
:: Loading modul[   11.535159] QLogic/NetXen Network Driver v4.0.80
e netxen_nic ... [  OK  ]
:: Loading modul[   11.544275] Solarflare NET driver v3.2
e sfc ... [  OK  ]
:: Loading modul[   11.552231] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e e1000[   11.559798] e1000: Copyright (c) 1999-2006 Intel Corporation.
... [  OK  ]
:: Loading modul[   11.569834] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e pcnet32 ... [  OK  ]
:: Loading modul[   11.580991] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
e vmxnet3 ... [  OK  ]
:: Loading modul[   11.591968] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
e bnx2[   11.602581] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 00:26:b9:41:b9:10
[   11.617899] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 00:26:b9:41:b9:12
[   11.634281] bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 00:26:b9:41:b9:14
[   11.649834] bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 00:26:b9:41:b9:16
... [  OK  ]
:: Loading module bnx2x[   11.670700] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $)
... [  OK  ]
:: Loading modul[   11.685216] cnic: Unknown symbol ip6_route_output (err 0)
e cnic ... [FAILED]
:: Loading module r8169 ... [  OK  ]
:: Loading module tg3 ... [  OK  ]
:: Loading module usbnet ... [  OK  ]
:: Loading modul[   11.712270] usbcore: registered new interface driver ax88179_178a
e ax88179_178a ... [  OK  ]
:: Loading modul[   11.722849] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
e button[   11.730842] ACPI: Power Button [PWRF]
... [  OK  ]
:: Loading modul[   11.758286] 2017-4-24 15:44:0 UTC
e synobios[   11.762026] synobios: load, major number 201
[   11.767157] Brand: Synology
[   11.769963] Model: DS-3617xs
[   11.772844] set group disks wakeup number to 4, spinup time deno 7
[   11.779016] synobios cpu_arch proc entry initialized
[   11.783972] synobios crypto_hw proc entry initialized
[   11.789016] synobios syno_platform proc entry initialized
... [  OK  ]
[   11.965114] bnx2 0000:01:00.0 eth0: using MSIX
udhcpc (v1.16.1) started
[   13.022158] bnx2 0000:01:00.1 eth1: using MSIX
udhcpc (v1.16.1) started
[   14.083235] bnx2 0000:02:00.0 eth2: using MSIX
udhcpc (v1.16.1) started
[   14.822191] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex
[   14.829576]
[   15.144302] bnx2 0000:02:00.1 eth3: using MSIX
udhcpc (v1.16.1) started
eth0      Link encap:Ethernet  HWaddr 00:11:32:2C:A6:03
         inet addr:169.254.145.210  Bcast:169.254.255.255  Mask:255.255.0.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:1 errors:0 dropped:0 overruns:0 frame:0
         TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:64 (64.0 B)  TX bytes:914 (914.0 B)

eth1      Link encap:Ethernet  HWaddr 00:11:32:2C:A6:04
         UP BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth2      Link encap:Ethernet  HWaddr 00:11:32:2C:A6:05
         UP BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth3      Link encap:Ethernet  HWaddr 00:11:32:2C:A6:06
         UP BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         UP LOOPBACK RUNNING  MTU:65536  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

:: Starting syslogd ... [  OK  ]
:: Starting scemd
[   16.718984] bnx2 0000:01:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
[   16.726371] , receive & transmit flow control ON
[   21.192277] pin 45 is protected by driver.
:: Starting services in background
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd -i eth0 -i eth1 -i eth2 -i eth3
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-0011322ca603::upnp:rootdevice
(60): Synology/synology_broadwell_3617xs/6.1-15047/169.254.145.210
(48): http://169.254.145.210:5000/description-eth0.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 169.254.145.210 0011322ca603 6.1-15047 synology_broadwell_3617xs eth0
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-0011322ca604::upnp:rootdevice
(60): Synology/synology_broadwell_3617xs/6.1-15047/169.254.167.128
(48): http://169.254.167.128:5000/description-eth1.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 169.254.167.128 0011322ca604 6.1-15047 synology_broadwell_3617xs eth1
eth2 not RUNNING
eth3 not RUNNING
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_con[   22.535287] usbcore: registered new interface driver usbhid
[   22.541429] usbhid: USB HID core driver
f failed:/var/tmp/nginx/avahi-aliases.conf
:: Loading module hid ... [  OK  ]
Mon Apr 24 15:44:11 2017

DiskStation login: [  364.207944] md: bind
[  364.210852] md/raid1:md0: active with 1 out of 12 mirrors
[  364.216265] md0: detected capacity change from 0 to 2549940224
[  367.251301] md: bind
[  367.254149] md/raid1:md1: active with 1 out of 12 mirrors
[  367.259553] md1: detected capacity change from 0 to 2147418112
[  367.266943]  md1: unknown partition table
[  367.276734]  md0: unknown partition table
[  367.509525] EXT4-fs (md0): barriers disabled
[  367.521201] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  367.552245] EXT4-fs (md0): barriers disabled
[  367.564195] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  367.576974] EXT4-fs (md0): barriers disabled
[  367.589240] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:

 

Hide  

 

Boot log  

 

DiskStation> tail /var/log/messages -n 100
Apr 24 15:44:09 scemd: scemd.c:845 Failed to ioctl, errno=1, Operation not permitted
Apr 24 15:44:09 scemd: scemd.c:845 Failed to ioctl, errno=1, Operation not permitted
Apr 24 15:44:10 scemd: scemd.c:270 ioctl failed
Apr 24 15:44:10 findhostd: ninstaller.c:721 Dev: sdc, DiskPath: /dev/sdc, Partition version: 8
Apr 24 15:44:10 findhostd: ninstaller.c:1260 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist
Apr 24 15:44:10 findhostd: ninstaller.c:1244(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0
Apr 24 15:44:10 findhostd: ninstaller.c:1245(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData
Apr 24 15:44:10 findhostd: ninstaller.c:1327 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0
Apr 24 15:44:10 avahi-daemon[6292]: /etc/avahi/services/http.service: parse failure: service group incomplete.
Apr 24 15:44:10 avahi-daemon[6292]: Failed to load service group file /etc/avahi/services/http.service, ignoring.
Apr 24 15:44:10 kernel: [   22.535287] usbcore: registered new interface driver usbhid
Apr 24 15:44:10 kernel: [   22.541429] usbhid: USB HID core driver
Apr 24 15:44:12 scemd: scemd.c:845 Failed to ioctl, errno=1, Operation not permitted
Apr 24 15:49:35 synoupgrade: synoupgrade.c:1912 Unknown param action=get_state
Apr 24 15:49:35 synoupgrade: synoupgrade.c:1912 Unknown param _dc=1493048974176
Apr 24 15:49:36 synoupgrade: ninstaller.c:721 Dev: sdc, DiskPath: /dev/sdc, Partition version: 8
Apr 24 15:49:36 synoupgrade: ninstaller.c:1260 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist
Apr 24 15:49:36 synoupgrade: ninstaller.c:1244(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0
Apr 24 15:49:36 synoupgrade: ninstaller.c:1245(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData
Apr 24 15:49:36 synoupgrade: ninstaller.c:1327 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0
Apr 24 15:49:36 synossdcache: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 24 15:49:36 synossdcache: ninstaller.c:209 mount  partition failed. dev=/dev/md0, path=/tmpRoot
Apr 24 15:49:36 synossdcache: synossdcache.c:29 Fail to mount [/dev/md0] to [/tmpRoot]
Apr 24 15:49:44 synoupgrade: synoupgrade.c:1912 Unknown param action=get_state
Apr 24 15:49:44 synoupgrade: synoupgrade.c:1912 Unknown param _dc=1493048984834
Apr 24 15:49:44 synoupgrade: synoupgrade.c:1912 Unknown param _dc=1493048984834
Apr 24 15:49:46 synoupgrade: ninstaller.c:721 Dev: sdc, DiskPath: /dev/sdc, Partition version: 8
Apr 24 15:49:46 synoupgrade: ninstaller.c:1260 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist
Apr 24 15:49:46 synoupgrade: ninstaller.c:1244(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0
Apr 24 15:49:46 synoupgrade: ninstaller.c:1245(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData
Apr 24 15:49:46 synoupgrade: ninstaller.c:1327 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0
Apr 24 15:49:46 synossdcache: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 24 15:49:46 synossdcache: ninstaller.c:209 mount  partition failed. dev=/dev/md0, path=/tmpRoot
Apr 24 15:49:46 synossdcache: synossdcache.c:29 Fail to mount [/dev/md0] to [/tmpRoot]
Apr 24 15:49:47 install.cgi: install.c:1030 Unknown param _dc=1493048989195
Apr 24 15:49:47 install.cgi: ninstaller.c:721 Dev: sdc, DiskPath: /dev/sdc, Partition version: 8
Apr 24 15:49:47 install.cgi: ninstaller.c:1260 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist
Apr 24 15:49:47 install.cgi: ninstaller.c:1244(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0
Apr 24 15:49:47 install.cgi: ninstaller.c:1245(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData
Apr 24 15:49:47 install.cgi: ninstaller.c:1327 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0
Apr 24 15:49:47 install.cgi: synoupgrade.c:677 system status = 3
Apr 24 15:49:47 install.cgi: ninstaller.c:2256 CreateDataVol=[0]
Apr 24 15:49:47 install.cgi: ninstaller.c:225 umount partition /tmpData
Apr 24 15:49:47 install.cgi: ninstaller.c:237 Fail to rmdir(/tmpData) [No such file or directory]
Apr 24 15:49:47 install.cgi: ninstaller.c:2267 installer cmd=[/usr/syno/sbin/installer.sh -r  >> /tmp/installer_sh.log 2>&1]
Apr 24 15:49:47 umount: can't umount /volume1: Invalid argument
Apr 24 15:49:47 raidtool: raid_ioctl_info.c:54 Failed to ioctl for raid status, errno=No such device
Apr 24 15:49:47 raidtool: raid_info_get.c:79 Failed to ioctl for raid status, errno=0X8000
Apr 24 15:49:47 raidtool: raid_info_get.c:68 Failed to open /dev/md1, errno=No such file or directory
Apr 24 15:49:47 raidtool: partition_layout_get_max.c:118 Choose biggest partition layout version 8.
Apr 24 15:49:50 kernel: [  364.207944] md: bind
Apr 24 15:49:50 kernel: [  364.210852] md/raid1:md0: active with 1 out of 12 mirrors
Apr 24 15:49:50 kernel: [  364.216265] md0: detected capacity change from 0 to 2549940224
Apr 24 15:49:50 synodiskport: external/external_disk_port_check.c:100 expected sdx or /dev/sdx, not md, not match any port type
Apr 24 15:49:53 synodiskport: external/external_disk_port_check.c:100 expected sdx or /dev/sdx, not md, not match any port type
Apr 24 15:49:53 kernel: [  367.251301] md: bind
Apr 24 15:49:53 kernel: [  367.254149] md/raid1:md1: active with 1 out of 12 mirrors
Apr 24 15:49:53 kernel: [  367.259553] md1: detected capacity change from 0 to 2147418112
Apr 24 15:49:53 raidtool: raidtool.c:685 system inited on [/dev/sdc1 ], [/dev/sdc2 ]
Apr 24 15:49:53 synodiskport: external/external_disk_port_check.c:100 expected sdx or /dev/sdx, not md, not match any port type
Apr 24 15:49:53 kernel: [  367.266943]  md1: unknown partition table
Apr 24 15:49:53 kernel: [  367.276734]  md0: unknown partition table
Apr 24 15:49:53 kernel: [  367.509525] EXT4-fs (md0): barriers disabled
Apr 24 15:49:53 kernel: [  367.521201] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 24 15:49:53 install.cgi: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 24 15:49:53 kernel: [  367.552245] EXT4-fs (md0): barriers disabled
Apr 24 15:49:53 install.cgi: ninstaller.c:225 umount partition /tmpRoot
Apr 24 15:49:53 kernel: [  367.564195] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 24 15:49:53 install.cgi: ninstaller.c:2305 retv=[0]
Apr 24 15:49:53 install.cgi: ninstaller.c:2310(ErrFHOSTDoFdiskFormat) retv=[0]
Apr 24 15:49:53 install.cgi: ninstaller.c:196 Mount partion /dev/md0 /tmpData
Apr 24 15:49:53 kernel: [  367.576974] EXT4-fs (md0): barriers disabled
Apr 24 15:49:53 kernel: [  367.589240] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 24 15:51:03 install.cgi: Remove /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1]
Apr 24 15:51:03 install.cgi: Create /tmpData/upd@te...cmd=[/bin/mkdir -p /tmpData/upd@te > /dev/null 2>&1]
Apr 24 15:51:03 install.cgi: Untar /tmpData/upd@te.pat...cmd=[/bin/tar xpf "/tmpData/upd@te.pat" -C /tmpData/upd@te > /dev/null 2>&1]
Apr 24 15:51:04 install.cgi: ErrFHOSTCheckUpgradeFile: Remove /tmpData/upd@te.pat...
Apr 24 15:51:04 install.cgi: Verify codesign of [/tmpData/upd@te]...
Apr 24 15:51:05 install.cgi: Verify checksum of [/tmpData/upd@te]...
Apr 24 15:51:06 install.cgi: Pass checksum of /tmpData/upd@te...
Apr 24 15:51:06 updater: updater.c:5796 Start of the updater...
Apr 24 15:51:06 updater: updater.c:2719 orgBuildNumber = 15047, newBuildNumber=15047
Apr 24 15:51:06 updater: updater_util.c:49 fail to read company in /tmpRoot//etc.defaults/synoinfo.conf
Apr 24 15:51:06 updater: file_check_key_value.c:25 SLIBCFileGetKeyValue(runccc) failed [0x0900 file_get_key_value.c:29]
Apr 24 15:51:06 updater: updater.c:6051 ==== Start flash update ====
Apr 24 15:51:06 updater: updater.c:6055 This is X86 platform
Apr 24 15:51:06 updater: boot/boot_lock.c(226): failed to mount boot device /dev/synoboot2 /tmp/bootmnt (errno:2)
Apr 24 15:51:06 updater: updater.c:5606 Failed to mount boot partition
Apr 24 15:51:06 updater: updater.c:2618 No need to reset reason for v.15047
Apr 24 15:51:06 updater: updater.c:6570 Failed to accomplish the update! (errno = 21)
Apr 24 15:ata/upd@te/updater -v /tmpData > /dev/null 2>&1] error[21]
Apr 24 15:51:07 install.cgi: ErrFHOSTCleanPatchDirFile: After updating /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1]
Apr 24 15:51:07 install.cgi: ErrFHOSTCleanPatchDirFile: Remove /tmpData/upd@te.pat...
Apr 24 15:51:07 install.cgi: ErrFHOSTDoUpgrade(2355): child process failed, retv=-21
Apr 24 15:51:07 install.cgi: ninstaller.c:2363(ErrFHOSTDoUpgrade) err=[-1]
Apr 24 15:51:07 install.cgi: ninstaller.c:2372(ErrFHOSTDoUpgrade) retv=[-21]
Apr 24 15:51:07 install.cgi: install.c:964 Upgrade by the download patch fail.
Apr 24 15:51:07 install.cgi: install.c:1205 Upgrade by the uploaded patch fail.
Jan  1 00:00:00 install.cgi: ninstaller.c:225 umount partition /tmpData
Jan  1 00:07:52 login[7041]: root login on 'console'
DiskStation>

 

Hide  
 
Link to post
Share on other sites

Hi,

 

Yes about the MTU, it changed automaticully when trying to make the cluster..

It does do something with the other NIC of the other VM..

 

Going to check if I can find anymore info on the web.. :???::roll::roll:

 

One more suggestion, im not sure where i saw it but one or both "machines" require static address on nic designated to HA cluster.

Link to post
Share on other sites
On 4/24/2017 at 11:10 PM, Salah said:

v1.02a2 ds3617xs

Latest Boot log with "injected bnx B firmware" on Dell R710.

Looks like a few modules are still acting up(cnic, megaraid?)

attempted Install of DSM: 57% error 13

 

boot log

 

Boot log
 

 

Some things are not clear.

1) Logs show your IP is 169.x.x.x. That's an internal MAC address. How are you able to access the box on your network and start the install?

2) Please use your REAL NIC MAC address. No need to actually populate all 4 NIC MAC addresses. MAC1 is enough. (Note: using Synology's MAC addresses (00:11:32:xx:xx) in order to use QC and abuse Synology is a violation of Synology's Services).

3) I am seing in the consol log the following: vid=0xABCD pid=0x1234 which do not seem to be a valid VID/PID. Make sure your VID/PID are correct then try again.

 

Please send logs when all above is corrected.

Link to post
Share on other sites

Hi,

 

Yes about the MTU, it changed automaticully when trying to make the cluster..

It does do something with the other NIC of the other VM..

 

Going to check if I can find anymore info on the web.. :???::roll::roll:

 

One more suggestion, im not sure where i saw it but one or both "machines" require static address on nic designated to HA cluster.

 

Hi,

 

Yes I know, thanks for your message.

Both machines have a static IP on their network cards..

I still can't get it to work..

 

Hope somebody else knows how..

Link to post
Share on other sites
On 4/25/2017 at 9:45 AM, Polanskiman said:

 

Some things are not clear.

1) Logs show your IP is 169.x.x.x. That's an internal MAC address. How are you able to access the box on your network and start the install?

2) Please use your REAL NIC MAC address. No need to actually populate all 4 NIC MAC addresses. MAC1 is enough. (Note: using Synology's MAC addresses (00:11:32:xx:xx) in order to use QC and abuse Synology is a violation of Synology's Services).

3) I am seing in the consol log the following: vid=0xABCD pid=0x1234 which do not seem to be a valid VID/PID. Make sure your VID/PID are correct then try again.

 

Please send logs when all above is corrected.

 

It gets the IP from dhcp a bit late, but it does get one.

ABCD/1234 is the parent of this usb stick.

I just used the serial and nic that was in grub.cfg for testing.

 

new logs: differing usb that was running 1.01 fine, real nic addy, differing serial, injected bnx.(3617 102a2) no changes to grub but what is required

 

Boot log  

 

                   GNU GRUB  version 2.02~beta2-36ubuntu3.9

+----------------------------------------------------------------------------+
| DS3617xs 6.1 Baremetal with Jun's Mod v1.02-alpha                          |
|*DS3617xs 6.1 Baremetal with Jun's Mod v1.02-alpha Reinstall                |
| DS3617xs 6.1 VMWare/ESXI with Jun's Mod v1.02-alpha                        |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
|                                                                            |
+----------------------------------------------------------------------------+

     Use the ^ and v keys to select which entry is highlighted.
     Press enter to boot the selected OS, `e' to edit the commands
     before booting or `c' for a command-line.
  The highlighted entry will be executed automatically in 0s.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.102 (root@build3) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15047 SMP Thu Feb 23 02:23:28 CST 2017
[    0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator syno_port_thaw=1 root=/dev/md0 sn=1430ODN562946 mac1=0026B941B910 netif_num=1 vid=0x154B pid=0x6545 mfg
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000010000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be767fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be768000-0x00000000be867fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000be868000-0x00000000be967fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be968000-0x00000000bea66fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bea67000-0x00000000bea6bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bea6c000-0x00000000beaebfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000beaec000-0x00000000bef11fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bef42000-0x00000000bef68fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf369000-0x00000000bf37efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf37f000-0x00000000bf3bdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf3be000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.10 by Dell Inc.
[    0.000000] efi:  ACPI 2.0=0xbea6b000  ACPI=0xbea6a000  SMBIOS=0xbea68000  MPS=0xbea67000
[    0.000000] efi: mem00: type=4, attr=0xf, range=[0x0000000000010000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem01: type=4, attr=0xf, range=[0x0000000000100000-0x0000000004000000) (63MB)
[    0.000000] efi: mem02: type=2, attr=0xf, range=[0x0000000004000000-0x0000000004d5c000) (13MB)
[    0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000004d5c000-0x0000000005000000) (2MB)
[    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000005000000-0x0000000005d5c000) (13MB)
[    0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000005d5c000-0x0000000037032000) (786MB)
[    0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000037032000-0x0000000037811000) (7MB)
[    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000037811000-0x000000008de68000) (1382MB)
[    0.000000] efi: mem08: type=2, attr=0xf, range=[0x000000008de68000-0x00000000bbe50000) (735MB)
[    0.000000] efi: mem09: type=4, attr=0xf, range=[0x00000000bbe50000-0x00000000bc055000) (2MB)
[    0.000000] efi: mem10: type=7, attr=0xf, range=[0x00000000bc055000-0x00000000bc078000) (0MB)
[    0.000000] efi: mem11: type=4, attr=0xf, range=[0x00000000bc078000-0x00000000bc079000) (0MB)
[    0.000000] efi: mem12: type=1, attr=0xf, range=[0x00000000bc079000-0x00000000bc096000) (0MB)
[    0.000000] efi: mem13: type=7, attr=0xf, range=[0x00000000bc096000-0x00000000bc0b3000) (0MB)
[    0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000bc0b3000-0x00000000bd310000) (18MB)
[    0.000000] efi: mem15: type=3, attr=0xf, range=[0x00000000bd310000-0x00000000bd364000) (0MB)
[    0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000bd364000-0x00000000be568000) (18MB)
[    0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000be568000-0x00000000be581000) (0MB)
[    0.000000] efi: mem18: type=3, attr=0xf, range=[0x00000000be581000-0x00000000be768000) (1MB)
[    0.000000] efi: mem19: type=5, attr=0x800000000000000f, range=[0x00000000be768000-0x00000000be829000) (0MB)
[    0.000000] efi: mem20: type=5, attr=0x800000000000000f, range=[0x00000000be829000-0x00000000be868000) (0MB)
[    0.000000] efi: mem21: type=6, attr=0x800000000000000f, range=[0x00000000be868000-0x00000000be87b000) (0MB)
[    0.000000] efi: mem22: type=6, attr=0x800000000000000f, range=[0x00000000be87b000-0x00000000be968000) (0MB)
[    0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000be968000-0x00000000bea5e000) (0MB)
[    0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000bea5e000-0x00000000bea67000) (0MB)
[    0.000000] efi: mem25: type=10, attr=0xf, range=[0x00000000bea67000-0x00000000bea6c000) (0MB)
[    0.000000] efi: mem26: type=9, attr=0xf, range=[0x00000000bea6c000-0x00000000beaec000) (0MB)
[    0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beaec000-0x00000000bef12000) (4MB)
[    0.000000] efi: mem28: type=4, attr=0x8, range=[0x00000000bef42000-0x00000000bef43000) (0MB)
[    0.000000] efi: mem29: type=3, attr=0x8, range=[0x00000000bef43000-0x00000000bef5a000) (0MB)
[    0.000000] efi: mem30: type=4, attr=0x8, range=[0x00000000bef5a000-0x00000000bef5c000) (0MB)
[    0.000000] efi: mem31: type=3, attr=0x8, range=[0x00000000bef5c000-0x00000000bef69000) (0MB)
[    0.000000] efi: mem32: type=0, attr=0x1, range=[0x00000000bf369000-0x00000000bf37f000) (0MB)
[    0.000000] efi: mem33: type=9, attr=0x8, range=[0x00000000bf37f000-0x00000000bf3be000) (0MB)
[    0.000000] efi: mem34: type=0, attr=0x1, range=[0x00000000bf3be000-0x00000000c0000000) (12MB)
[    0.000000] efi: mem35: type=0, attr=0x1, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] efi: mem36: type=0, attr=0x1, range=[0x00000000fe000000-0x0000000100000000) (32MB)
[    0.000000] efi: mem37: type=7, attr=0xf, range=[0x0000000100000000-0x0000000840000000) (29696MB)
[    0.000000] SMBIOS 2.6 present.
[    0.000000] e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
[    0.000000] e820: last_pfn = 0xbef69 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x83fe00000-0x83fffffff]
[    0.000000] init_memory_mapping: [mem 0x83c000000-0x83fdfffff]
[    0.000000] init_memory_mapping: [mem 0x800000000-0x83bffffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbe767fff]
[    0.000000] init_memory_mapping: [mem 0xbe968000-0xbea66fff]
[    0.000000] init_memory_mapping: [mem 0xbeaec000-0xbef11fff]
[    0.000000] init_memory_mapping: [mem 0xbef42000-0xbef68fff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[    0.000000] RAMDISK: [mem 0x37032000-0x37810fff]
[    0.000000] ACPI: RSDP 0x00000000BEA6B000 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000000F1254 0009C (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: FACP 0x00000000BF3A3F9C 000F4 (v03 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: DSDT 0x00000000BF37F000 03DD0 (v01 DELL   PE_SC3   00000001 INTL 20050624)
[    0.000000] ACPI: FACS 0x00000000BF3A6000 00040
[    0.000000] ACPI: APIC 0x00000000BF3A3478 0015E (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SPCR 0x00000000BF3A35D8 00050 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: HPET 0x00000000BF3A362C 00038 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: DMAR 0x00000000BF3A3668 001B0 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: MCFG 0x00000000BF3A38C4 0003C (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: WD__ 0x00000000BF3A3904 00134 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SLIC 0x00000000BF3A3A3C 00176 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: ERST 0x00000000BF382F70 00270 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: HEST 0x00000000BF3831E0 003A8 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: BERT 0x00000000BF382DD0 00030 (v01 DELL   PE_SC3   00000001 DELL0 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[    0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 24 pages/cpu @ffff88083fc00000 s69312 r8192 d20800 u131072
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8265086
[    0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator syno_port_thaw=1 root=/dev/md0 sn=1430ODN562946 mac1=0026B941B910 netif_num=1 vid=0x154B pid=0x6545 mfg
[    0.000000] Power on seq num: 0
[    0.000000] Synology Hardware Version: DS3617xs-j
[    0.000000] Vender format version: 2
[    0.000000] Serial Number: 1430ODN562946
[    0.000000] Mac1: 0026B941B910
[    0.000000] Internal netif num: 1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.000000] Memory: 32828792k/34603008k available (4799k kernel code, 1068784k absent, 705432k reserved, 3807k data, 760k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:1352 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 134217728 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.002000] tsc: Detected 2793.126 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.25 BogoMIPS (lpj=2793126)
[    0.010619] pid_max: default: 32768 minimum: 301
[    0.015246] init_memory_mapping: [mem 0xbe768000-0xbe867fff]
[    0.020909] init_memory_mapping: [mem 0xbe868000-0xbe967fff]
[    0.029426] Security Framework initialized
[    0.033528] AppArmor: AppArmor initialized
[    0.037628] Mount-cache hash table entries: 256
[    0.042311] Initializing cgroup subsys memory
[    0.046675] Initializing cgroup subsys devices
[    0.051115] Initializing cgroup subsys freezer
[    0.055555] Initializing cgroup subsys blkio
[    0.059841] CPU: Physical Processor ID: 1
[    0.063846] CPU: Processor Core ID: 0
[    0.067507] mce: CPU supports 9 MCE banks
[    0.071521] CPU0: Thermal monitoring enabled (TM1)
[    0.076314] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.076314] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.076314] tlb_flushall_shift: 6
[    0.090795] Freeing SMP alternatives: 24k freed
[    0.095328] ACPI: Core revision 20130328
[    0.100272] ACPI: All ACPI Tables successfully acquired
[    0.108547] dmar: Host address width 40
[    0.112383] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[    0.117696] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020f6
[    0.125779] dmar: RMRR base: 0x000000bf4c8000 end: 0x000000bf4dffff
[    0.132041] dmar: RMRR base: 0x000000bf4b1000 end: 0x000000bf4bffff
[    0.138302] dmar: RMRR base: 0x000000bf4a1000 end: 0x000000bf4a1fff
[    0.144562] dmar: RMRR base: 0x000000bf4a3000 end: 0x000000bf4a3fff
[    0.150824] dmar: RMRR base: 0x000000bf4a5000 end: 0x000000bf4a5fff
[    0.157086] dmar: RMRR base: 0x000000bf4a7000 end: 0x000000bf4a7fff
[    0.163346] dmar: RMRR base: 0x000000bf4c0000 end: 0x000000bf4c0fff
[    0.169607] dmar: RMRR base: 0x000000bf4c2000 end: 0x000000bf4c2fff
[    0.175868] dmar: ATSR flags: 0x0
[    0.179278] This system BIOS has enabled interrupt remapping
[    0.179278] on a chipset that contains an erratum making that
[    0.179278] feature unstable.  To maintain system stability
[    0.179278] interrupt remapping is being disabled.  Please
[    0.179278] contact your BIOS vendor for an update
[    0.206511] Switched APIC routing to physical flat.
[    0.211904] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.227913] smpboot: CPU0: Intel(R) Xeon(R) CPU           X5560  @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[    0.339727] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
4 #15 OK48020] perf_event_intel: CPU erratum AAJ80 worked around
[    0.680081] Brought up 16 CPUs
[    0.683130] smpboot: Total of 16 processors activated (89370.80 BogoMIPS)
[    0.699174] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.707589] devtmpfs: initialized
[    0.711115.. xor() 6884 MB/s, rmw enabled
[    0.942199] raid6: using ssse3x2 recovery algorithm
[    0.947128] ACPI: Added _OSI(Module Device)
[    0.951305] ACPI: Added _OSI(Processor Device)
[    0.955741] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.960436] ACPI: Added _OSI(Processor Aggregator Device)
[    0.966800] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.974356] ACPI: Interpreter enabled
[    0.978021] ACPI: (supports S0 S4 S5)
[    0.981675] ACPI: Using IOAPIC for interrupt routing
[    0.986679] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.995835] ACPI: No dock devices found.
[    1.005927] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.012320] PCI host bridge to bus 0000:00
[    1.016416] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.021895] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.028065] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.034236] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.041103] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff]
[    1.047969] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    1.057323] pci 0000:00:1f.0: address space collision: [io  0x0800-0x087f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000800-0x00000803 flags 0x80000000]
[    1.070960] pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH6 GPIO
[    1.078088] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[    1.085650] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[    1.093212] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[    1.102837] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.109854] pci 0000:00:03.0: PCI bridge to [bus 02]
[    1.116863] pci 0000:00:04.0: PCI bridge to [bus 03]
[    1.121890] pci 0000:00:05.0: PCI bridge to [bus 04]
[    1.126919] pci 0000:00:06.0: PCI bridge to [bus 05]
[    1.131939] pci 0000:00:07.0: PCI bridge to [bus 06]
[    1.136967] pci 0000:00:09.0: PCI bridge to [bus 07]
[    1.142175] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[    1.149081] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    1.155228] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    1.162062] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[    1.168988] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[    1.175914] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[    1.182839] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[    1.189766] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[    1.196694] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[    1.203621] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    1.211695] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[    1.218647] ACPI: Enabled 1 GPEs in block 00 to 3F
[    1.223642] vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none
[    1.231722] vgaarb: loaded
[    1.234422] vgaarb: bridge control possible 0000:08:03.0
[    1.239901] SCSI subsystem initialized
[    1.243645] ACPI: bus type ATA registered
[    1.247899] pps_core: LinuxPPS API ver. 1 registered
[    1.252857] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    1.262001] PTP clock support registered
[    1.266067] PCI: Using ACPI for IRQ routing
[    1.275508] PCI: Discovered peer bus fe
[    1.279371] PCI host bridge to bus 0000:fe
[    1.283465] pci_bus 0000:fe: root bus resource [io  0x0000-0xffff]
[    1.289635] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
[    1.296674] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
[    1.305846] PCI: Discovered peer bus ff
[    1.309710] PCI host bridge to
                                [    3.032386] Freeing initrd memory: 8060k freed
[    3.038547] IOMMU 0 0xfed90000: using Queued invalidation
[    3.043959] IOMMU passthrough mode = 1
[    3.047729] IOMMU: hardware identity mapping for device 0000:00:00.0
[    3.054077] IOMMU: hardware identity mapping for device 0000:00:01.0
[    3.060423] IOMMU: hardware identity mapping for device 0000:00:03.0
[    3.066771] IOMMU: hardware identity mapping for device 0000:00:04.0
[    3.073118] IOMMU: hardware identity mapping for device 0000:00:05.0
[    3.079466] IOMMU: hardware identity mapping for device 0000:00:06.0
[    3.085813] IOMMU: hardware identity mapping for device 0000:00:07.0
[    3.092161] IOMMU: hardware identity mapping for device 0000:00:09.0
[    3.098510] IOMMU: hardware identity mapping for device 0000:00:14.0
[    3.104857] IOMMU: hardware identity mapping for device 0000:00:14.1
[    3.111204] IOMMU: hardware identity mapping for device 0000:00:14.2
[    3.117550] IOMMU: hardware identity mapping for device 0000:00:1a.0
[    3.123897] IOMMU: hardware identity mapping for device 0000:00:1a.1
[    3.130244] IOMMU: hardware identity mapping for device 0000:00:1a.7
[    3.136590] IOMMU: hardware identity mapping for device 0000:00:1d.0
[    3.142938] IOMMU: hardware identity mapping for device 0000:00:1d.1
[    3.149285] IOMMU: hardware identity mapping for device 0000:00:1d.7
[    3.155633] IOMMU: hardware identity mapping for device 0000:00:1f.0
[    3.161984] IOMMU: hardware identity mapping for device 0000:00:1f.2
[    3.168339] IOMMU: hardware identity mapping for device 0000:01:00.0
[    3.174686] IOMMU: hardware identity mapping for device 0000:01:00.1
[    3.181041] IOMMU: hardware identity mapping for device 0000:02:00.0
[    3.187389] IOMMU: hardware identity mapping for device 0000:02:00.1
[    3.193743] IOMMU: hardware identity mapping for device 0000:03:00.0
[    3.200098] IOMMU: hardware identity mapping for device 0000:fe:00.0
[    3.206446] IOMMU: hardware identity mapping for device 0000:fe:00.1
[    3.212793] IOMMU: hardware identity mapping for device 0000:fe:02.0
[    3.219140] IOMMU: hardware identity mapping for device 0000:fe:02.1
[    3.225486] IOMMU: hardware identity mapping for device 0000:fe:02.4
[    3.231833] IOMMU: hardware identity mapping for device 0000:fe:02.5
[    3.238181] IOMMU: hardware identity mapping for device 0000:fe:03.0
[    3.244528] IOMMU: hardware identity mapping for device 0000:fe:03.1
[    3.250876] IOMMU: hardware identity mapping for device 0000:fe:03.2
[    3.257223] IOMMU: hardware identity mapping for device 0000:fe:03.4
[    3.263571] IOMMU: hardware identity mapping for device 0000:fe:04.0
[    3.269919] IOMMU: hardware identity mapping for device 0000:fe:04.1
[    3.276266] IOMMU: hardware identity mapping for device 0000:fe:04.2
[    3.282614] IOMMU: hardware identity mapping for device 0000:fe:04.3
[    3.288962] IOMMU: hardware identity mapping for device 0000:fe:05.0
[    3.295311] IOMMU: hardware identity mapping for device 0000:fe:05.1
[    3.301659] IOMMU: hardware identity mapping for device 0000:fe:05.2
[    3.308006] IOMMU: hardware identity mapping for device 0000:fe:05.3
[    3.314354] IOMMU: hardware identity mapping for device 0000:fe:06.0
[    3.320701] IOMMU: hardware identity mapping for device 0000:fe:06.1
[    3.327048] IOMMU: hardware identity mapping for device 0000:fe:06.2
[    3.333395] IOMMU: hardware identity mapping for device 0000:fe:06.3
[    3.339748] IOMMU: hardware identity mapping for device 0000:ff:00.0
[    3.346095] IOMMU: hardware identity mapping for device 0000:ff:00.1
[    3.352442] IOMMU: hardware identity mapping for device 0000:ff:02.0
[    3.358789] IOMMU: hardware identity mapping for device 0000:ff:02.1
[    3.365136] IOMMU: hardware identity mapping for device 0000:ff:02.4
[    3.371483] IOMMU: hardware identity mapping for device 0000:ff:02.5
[    3.377830] IOMMU: hardware identity mapping for device 0000:ff:03.0
[    3.384179] IOMMU: hardware identity mapping for device 0000:ff:03.1
[    3.390526] IOMMU: hardware identity mapping for device 0000:ff:03.2
[    3.396873] IOMMU: hardware identity mapping for dW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
[    3.603513] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[    3.620821] audit: initializing netlink socket (disabled)
[    3.626243] type=2000 audit(1493112961.017:1): initialized
[    3.632540] bounce pool size: 64 pages
[    3.636650] VFS: Disk quotas dquot_6.5.2
[    3.640613] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.647655] NFS: Registering the id_resolver key type
[    3.652709] Key type id_resolver registered
[    3.656886] Key type id_legacy registered
[    3.660899] msgmni has been set to 32768
[    3.665026] async_tx: api initialized (async)
[    3.669503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.676895] io scheduler noop registered
[    3.680811] io scheduler deadline registered
[    3.685115] io scheduler cfq registered
[    3.816178] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
¦[    3.843211] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.869879] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    3.885224] brd: module loaded
[    3.88entity mapping
[    4.250659] hub 3-0:1.0: USB hub found
[    4.254405] hub 3-0:1.0: 2 ports detected
[    4.258633] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.263854] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    4.271270] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[    4.277019] 32bit 0000:00:1d.1 uses non-identity mapping
[    4.282642] hub 4-0:1.0: USB hub found
[    4.286390] hub 4-0:1.0: 2 ports detected
... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module etxhci-hcd ... [  OK  ]
:: Loading modul[    4.314271] usbcore: registered new interface driver usb-storage
e usb-storage ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading modul[    4.332889] VMware PVSCSI driver - version 1.0.2.0-k
e vmw_pvscsi ... [  OK  ]
:: Loading modul[    4.342133] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
e megaraid_mm ... [  OK  ]
:: Loading modul[    4.353867] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
e megaraid_mbox ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading mo[    4.372888] Fusion MPT base driver 3.04.20
[    4.377936] Copyright (c) 1999-2008 LSI Corporation
dule mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading modul[    4.389979] Fusion MPT SPI Host driver 3.04.20
e mptspi ... [  OK  ]
:: Loading modul[    4.398919] Fusion MPT SAS Host driver 3.04.20
e mptsas ... [  OK  ]
:: Loading modul[    4.407652] Fusion MPT misc device (ioctl) driver 3.04.20
e mptctl[    4.413853] mptctl: Registered with Fusion MPT base driver
[    4.419887] mptctl: /dev/mptctl @ (major,minor=10,220)
... [  OK  ]
:: Loading modul[    4.428962] ata_piix 0000:00:1f.2: MAP [
e ata_piix[    4.433318]  P0 -- P1 -- ]
[    4.587476] 32bit 0000:00:1f.2 uses non-identity mapping
[    4.593355] scsi0 : ata_piix
[    4.596497] scsi1 : ata_piix
[    4.599566] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
[    4.606699] ata2: SATA max UDMA/133 cmd 0xec
                                              [    5.621483] ata2: failed to resume link (SControl 0)
[    5.637144] ata2: SATA link down (SStatus 4 SControl 0)
... [  OK  ]
:: Loading modul[    5.646194] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
e megaraid_sas[    5.653060] megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 3:slot 0:func 0
[    5.660811] 32bit 0000:03:00.0 uses non-identity mapping
[    5.666154] megasas: FW now in Ready state
[    5.712571] megasas_init_mfi: fw_support_ieee=0
[    5.716921] megasas: INIT adapter done
[    5.783663] scsi2 : LSI SAS based MegaRAID driver
[    5.788556] I/O scheduler elevator not found
[    5.810652] scsi 2:0:0:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.819457] I/O scheduler elevator not found
[    5.840629] scsi 2:0:1:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.849422] I/O scheduler elevator not found
[    5.870010] scsi 2:0:2:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.878802] I/O scheduler elevator not found
[    5.899874] scsi 2:0:3:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.908667] I/O scheduler elevator not found
[    5.929789] scsi 2:0:4:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.938580] I/O scheduler elevator not found
[    5.959706] scsi 2:0:5:0: Direct-Access     SEAGATE  ST3300657SS              ES02 PQ: 0 ANSI: 5
[    5.968498] I/O scheduler elevator not found



[    6.082677] I/O scheduler elevator not found
[    6.127934] dmar: DRHD: handling fault status reg 2
[    6.132805] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe88000
[    6.132805] DMAR:[fault reason 06] PTE Read access is not set
[    6.206440] dmar: DRHD: handling fault status reg 102
[    6.211483] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe8a000
[    6.211483] DMAR:[fault reason 06] PTE Read access is not set
[    6.246764] dmar: DRHD: handling fault status reg 202
[    6.251808] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe89000
[    6.251808] DMAR:[fault reason 06] PTE Read access is not set
[    6.313388] dmar: DRHD: handling fault status reg 302
[    6.318432] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe8a000
[    6.318432] DMAR:[fault reason 06] PTE Read access is not set
[    6.331467] scsi 2:0:32:0: Enclosure         DP       BACKPLANE                1.07 PQ: 0 ANSI: 5
[    6.340507] ses 2:0:32:0: Attached Enclosure device
[    6.438696] dmar: DRHD: handling fault status reg 402
[    6.443740] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe86000
[    6.443740] DMAR:[fault reason 06] PTE Read access is not set
[    6.456775] ses 2:0:32:0: Wrong diagnostic page; asked for 7 got 0
[    6.831603] dmar: DRHD: handling fault status reg 502
[    6.836647] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe8a000
[    6.836647] DMAR:[fault reason 06] PTE Read access is not set
[    6.849693] I/O scheduler elevator not found



[    7.563014] I/O scheduler elevator not found
[    7.567454] I/O scheduler elevator not foun 7.879295]  sdc: sdc1 sdc2
[    7.882855] sd 2:2:0:0: [sdc] Attached SCSI disk
[    7.914485] dmar: DRHD: handling fault status reg 602
[    7.919531] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr ffe84000
[    7.919531] DMAR:[fault reason 06] PTE Read access is not set
[    7.932577] ses 2:0:32:0: Wrong diagnostic pa0899] I/O scheduler elevator not found
[    7.965343] I/O scheduler elevator not found



[    9.044614] I/O scheduler elevator not found
... [  OK  ]
:: Loading modul[    9.053231] mpt2sas version 20.00.00.00 loaded
e mpt2sas ... [  OK  ]
:: Loading modul[    9.062349] mpt3sas version 13.00.00.00 loaded
e mpt3sas ... [  OK  ]
Insert net drive[    9.069567] broadwell_synobios: module license 'Synology Inc.' taints kernel.
[    9.077488] Disabling lock debugging due to kernel taint
r(Mindspeed only[    9.083231] 2017-4-25 9:36:9 UTC
)...
[    9.087403] synobios: load, major number 201
[    9.092188] Brand: Synology
[    9.094996] Model: DS-3617xs
[    9.097881] set group disks wakeup number to 4, spinup time deno 7
[    9.104054] synobios cpu_arch proc entry initialized
[    9.109012] synobios crypto_hw proc entry initialized
[    9.114056] synobios syno_platform proc entry initialized
Starting /usr/syno/bin/synocfgen...
/usr/syno/b[    9.123346] synobios: unload
in/synocfgen returns 0
[    9.132396] md: Autodetecting RAID arrays.
[    9.145482] md: deny sdc1.
[    9.148193] md: export_rdev(sdc1)
[    9.157827] md: deny sdc2.
[    9.160531] md: export_rdev(sdc2)
[    9.163844] md: Scanned 2 and added 0 devices.
[    9.168281] md: autorun ...
[    9.171069] md: ... autorun DONE
                                  Tue Apr 25 09:36:11 UTC 2017
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=16469668k,nr_inodes=4117417,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 3
starting pid 4361, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
mdadm: error opening /dev/md1: No such file or directory
rc: Use all internal disk as swap.
/etc/rc: line 106: sed: not found
/etc/rc: line 106: /usr/syno/sbin/synostgsysraid: not found
/etc/rc: line 106: sed: not found
rc: No assigned swap disk (sdc2) can be assembled, use all instead.
rc: Use all internal disk as swap.
/etc/rc: line 106: sed: not found
/etc/rc: line 106: /usr/syno/sbin/synostgsysraid: not found
/etc/rc: line 106: sed: not found
rc: No disk (sdc2) can be assembled.
swapon: can't stat '/dev/md1': No such file or directory
:: Loading modul[   11.302152] scsi 0:0:0:0: Attached scsi generic sg0 type 5
e sg[   11.308242] ses 2:0:32:0: Attached scsi generic sg1 type 13
[   11.314120] sd 2:2:0:0: Attached scsi generic sg2 type 0
... [  OK  ]
:: Loading module mdio ... [  OK  ]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading modul[   11.389103] dca service started, version 1.12.1
e dca ... [  OK  ]
:: Loading modul[   11.398206] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
e e1000e[   11.404677] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
... [  OK  ]
:: Loading module i2c-algo-bit ... [  OK  ]
:: Loading modul[   11.418652] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[   11.426008] Copyright (c) 2007-2015 Intel Corporation.
e igb ... [  OK  ]
:: Loading modul[   11.436221] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6
e ixgbe[   11.443432] Copyright(c) 1999 - 2016 Intel Corporation.
[   11.449288] ixgbe unsupported_sfp_notify proc entry initialized
... [  OK  ]
:: Loading module libcrc32c ... [  OK  ]
:: Loading module mii ... [  OK  ]
:: Loading module libphy ... [  OK  ]
:: Loading module atl1 ... [  OK  ]
:: Loading module atl1e ... [  OK  ]
:: Loading module atl1c ... [  OK  ]
:: Loading module alx ... [  OK  ]
:: Loading module uio ... [  OK  ]
:: Loading module ipg ... [  OK  ]
:: Loading modul[   11.500822] jme: JMicron JMC2XX ethernet driver version 1.0.8
e jme ... [  OK  ]
:: Loading module skge ... [  OK  ]
:: Loading modul[   11.514626] sky2: driver version 1.30
e sky2 ... [  OK  ]
:: Loading module ptp_pch ... [  OK  ]
:: Loading modul[   11.526247] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
e pch_gbe ... [  OK  ]
:: Loading module qla3xxx ... [  OK  ]
:: Loading modul[   11.541078] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
e qlcnic ... [  OK  ]
:: Loading module qlge ... [  OK  ]
:: Loading modul[   11.555830] QLogic/NetXen Network Driver v4.0.80
e netxen_nic ... [  OK  ]
:: Loading modul[   11.564938] Solarflare NET driver v3.2
e sfc ... [  OK  ]
:: Loading modul[   11.572877] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e e1000[   11.580473] e1000: Copyright (c) 1999-2006 Intel Corporation.
... [  OK  ]
:: Loading modul[   11.590483] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e pcnet32 ... [  OK  ]
:: Loading modul[   11.601634] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
e vmxnet3 ... [  OK  ]
:: Loading modul[   11.612574] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
e bnx2[   11.623249] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 00:26:b9:41:b9:10
[   11.638635] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 00:26:b9:41:b9:12
[   11.654024] bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 00:26:b9:41:b9:14
[   11.669577] bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 00:26:b9:41:b9:16
... [  OK  ]
:: Loading module bnx2x[   11.690289] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $)
... [  OK  ]
:: Loading modul[   11.704832] cnic: Unknown symbol ip6_route_output (err 0)
e cnic ... [FAILED]
:: Loading module r8169 ... [  OK  ]
:: Loading module tg3 ... [  OK  ]
:: Loading module usbnet ... [  OK  ]
:: Loading modul[   11.731938] usbcore: registered new interface driver ax88179_178a
e ax88179_178a ... [  OK  ]
:: Loading modul[   11.742495] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
e button[   11.750467] ACPI: Power Button [PWRF]
... [  OK  ]
:: Loading modul[   11.777849] 2017-4-25 9:36:12 UTC
[   11.781549] synobios: load, major number 201
e synobios[   11.785816] Brand: Synology
[   11.789487] Model: DS-3617xs
[   11.792375] set group disks wakeup number to 4, spinup time deno 7
[   11.798549] synobios cpu_arch proc entry initialized
[   11.803505] synobios crypto_hw proc entry initialized
[   11.808549] synobios syno_platform proc entry initialized
... [  OK  ]
[   11.979141] bnx2 0000:01:00.0 eth0: using MSIX
udhcpc (v1.16.1) started
[   13.039223] bnx2 0000:01:00.1 eth1: using MSIX
udhcpc (v1.16.1) started
[   14.100282] bnx2 0000:02:00.0 eth2: using MSIX
udhcpc (v1.16.1) started
[   14.920208] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex
[   14.927594]
[   15.161368] bnx2 0000:02:00.1 eth3: using MSIX
udhcpc (v1.16.1) started
eth0      Link encap:Ethernet  HWaddr 00:26:B9:41:B9:10
         inet addr:169.254.128.162  Bcast:169.254.255.255  Mask:255.255.0.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:1 errors:0 dropped:0 overruns:0 frame:0
         TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:64 (64.0 B)  TX bytes:914 (914.0 B)

eth1      Link encap:Ethernet  HWaddr 00:26:B9:41:B9:12
         UP BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth2      Link encap:Ethernet  HWaddr 00:26:B9:41:B9:14
         UP BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth3      Link encap:Ethernet  HWaddr 00:26:B9:41:B9:16
         UP BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         UP LOOPBACK RUNNING  MTU:65536  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

:: Starting syslogd ... [  OK  ]
:: Starting scemd
[   16.736045] bnx2 0000:01:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
[   16.743432] , receive & transmit flow control ON
[   21.209305] pin 45 is protected by driver.
:: Starting services in background
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd -i eth0 -i eth1 -i eth2 -i eth3
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-0026b941b910::upnp:rootdevice
(60): Synology/synology_broadwell_3617xs/6.1-15047/169.254.128.162
(48): http://169.254.128.162:5000/description-eth0.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 169.254.128.162 0026b941b910 6.1-15047 synology_broadwell_3617xs eth0
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-0026b941b912::upnp:rootdevice
(60): Synology/synology_broadwell_3617xs/6.1-15047/169.254.248.185
(48): http://169.254.248.185:5000/description-eth1.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 169.254.248.185 0026b941b912 6.1-15047 synology_broadwell_3617xs eth1
eth2 not RUNNING
eth3 not RUNNING
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_con[   22.549313] usbcore: registered new interface driver usbhid
[   22.555781] usbhid: USB HID core driver
f failed:/var/tmp/nginx/avahi-aliases.conf
:: Loading module hid ... [  OK  ]
Tue Apr 25 09:36:23 2017

 

Hide  
 

Logs for attempted install of DSM and lsmod

 

Boot log  

 

[  130.570302] md: bind
[  130.573243] md/raid1:md0: active with 1 out of 12 mirrors
[  130.578652] md0: detected capacity change from 0 to 2549940224
[  133.623914] md: bind
[  133.626807] md/raid1:md1: active with 1 out of 12 mirrors
[  133.632219] md1: detected capacity change from 0 to 2147418112
[  133.639600]  md1: unknown partition table
[  133.649188]  md0: unknown partition table
[  133.937543] EXT4-fs (md0): barriers disabled
[  133.949716] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  133.980754] EXT4-fs (md0): barriers disabled
[  133.992689] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  134.005605] EXT4-fs (md0): barriers disabled
[  134.017691] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  181.181861] EXT4-fs (md0): barriers disabled
[  181.195731] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  181.296904] EXT4-fs (md0): barriers disabled
[  181.309243] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  181.347346] EXT4-fs (md0): barriers disabled
[  181.359534] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  181.385857] EXT4-fs (md0): barriers disabled
[  181.398468] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  185.904411] EXT4-fs (md0): barriers disabled
[  185.915965] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  185.998167] EXT4-fs (md0): barriers disabled
[  186.011028] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  186.031291] EXT4-fs (md0): barriers disabled
[  186.043013] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  186.069813] EXT4-fs (md0): barriers disabled
[  186.082046] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  202.492132] EXT4-fs (md0): barriers disabled
[  202.504737] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  202.573450] EXT4-fs (md0): barriers disabled
[  202.585653] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  202.606297] EXT4-fs (md0): barriers disabled
[  202.618673] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  202.646086] EXT4-fs (md0): barriers disabled
[  202.657704] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  203.176694] EXT4-fs (md0): barriers disabled
[  203.188305] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  203.236478] EXT4-fs (md0): barriers disabled
[  203.248607] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  203.269865] EXT4-fs (md0): barriers disabled
[  203.281334] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  203.333865] md0: detected capacity change from 2549940224 to 0
[  203.339696] md: md0: set sdc1 to auto_remap [0]
[  203.344223] md: md0 stopped.
[  203.347098] md: unbind
[  203.359317] md: export_rdev(sdc1)
[  203.392151] md1: detected capacity change from 2147418112 to 0
[  203.397978] md: md1: set sdc2 to auto_remap [0]
[  203.402502] md: md1 stopped.
[  203.405377] md: unbind
[  203.419368] md: export_rdev(sdc2)
[  206.459784] md: bind
[  206.462681] md/raid1:md0: active with 1 out of 12 mirrors
[  206.468090] md0: detected capacity change from 0 to 2549940224
[  209.505408] md: bind
[  209.508317] md/raid1:md1: active with 1 out of 12 mirrors
[  209.513723] md1: detected capacity change from 0 to 2147418112
[  209.521132]  md1: unknown partition table
[  209.530177]  md0: unknown partition table
[  209.824996] EXT4-fs (md0): barriers disabled
[  209.837066] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  209.870398] EXT4-fs (md0): barriers disabled
[  209.882311] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[  209.896896] EXT4-fs (md0): barriers disabled
[  209.909308] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:

DiskStation login: root


BusyBox v1.16.1 (2017-02-14 03:57:39 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

DiskStation> tail /var/log/messages -n 200
Jan  1 00:00:37 synoupgrade: ninstaller.c:1245(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData
Jan  1 00:00:37 synoupgrade: ninstaller.c:1327 gblSupportRaid: 1, gSysStatus: 1, gblCreateDataVol: 0, gblSystemRecoverable: 0
Jan  1 00:00:37 synossdcache: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Jan  1 00:00:37 kernel: [  181.385857] EXT4-fs (md0): barriers disabled
Jan  1 00:00:37 kernel: [  181.398468] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Jan  1 00:00:37 synossdcache: synossdcache.c:38 Fail to get unique from /tmpRoot/etc.defaults/synoinfo.conf
Jan  1 00:00:37 synossdcache: ninstaller.c:225 umount partition /tmpRoot
Jan  1 00:00:40 synoupgrade: synoupgrade.c:1912 Unknown param action=get_state
Jan  1 00:00:40 synoupgrade: synoupgrade.c:1912 Unknown param _dc=1493130909487
Apr 25 14:35:10 synoupgrade: ninstaller.c:721 Dev: sdc, DiskPath: /dev/sdc, Partition version: 8
Apr 25 14:35:10 synoupgrade: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 25 14:35:10 kernel: [  185.904411] EXT4-fs (md0): barriers disabled
Apr 25 14:35:10 kernel: [  185.915965] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:35:10 synoupgrade: ninstaller.c:225 umount partition /tmpRoot
Apr 25 14:35:10 synoupgrade: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 25 14:35:10 kernel: [  185.998167] EXT4-fs (md0): barriers disabled
Apr 25 14:35:10 kernel: [  186.011028] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:35:10 synoupgrade: ninstaller.c:225 umount partition /tmpRoot
Apr 25 14:35:10 synoupgrade: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 25 14:35:10 kernel: [  186.031291] EXT4-fs (md0): barriers disabled
Apr 25 14:35:10 kernel: [  186.043013] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:35:10 synoupgrade: ninstaller.c:538 failed to get upnpmodelname from [/tmpRoot/etc.defaults/synoinfo.conf].
Apr 25 14:35:10 synoupgrade: ninstaller.c:545 failed to get buildnumber from [/tmpRoot/etc.defaults/VERSION].
Apr 25 14:35:10 synoupgrade: ninstaller.c:552 failed to get productversion from [/tmpRoot/etc.defaults/VERSION].
Apr 25 14:35:10 synoupgrade: ninstaller.c:554 failed to get majorversion from [/tmpRoot/etc.defaults/VERSION].
Apr 25 14:35:10 synoupgrade: ninstaller.c:557 failed to get minorversion from [/tmpRoot/etc.defaults/VERSION].
Apr 25 14:35:10 synoupgrade: lib/system/system_platform_get.c:35 failed to get unique from /tmpRoot/etc.defaults/synoinfo.conf errno=[0x0900 file_get_key_value.c:29]
Apr 25 14:35:10 synoupgrade: ninstaller.c:569 failed to get platform from [/tmpRoot/etc.defaults/synoinfo.conf].
Apr 25 14:35:10 synoupgrade: lib/system/system_max_align_get.c:86 [/tmpRoot/.system_info/pgsql_alignment] doesn't exist, check model name for alignment
Apr 25 14:35:10 synoupgrade: lib/system/system_endian_get.c:61 [/tmpRoot/.system_info/endian] doesn't exist, check model name for endian
Apr 25 14:35:10 synoupgrade: lib/system/system_bit_get.c:57 [/tmpRoot/.system_info/bits] doesn't exist, check model name for bits
Apr 25 14:35:10 synoupgrade: ninstaller.c:602 fail to get admin port from /tmpRoot/etc/synoinfo.conf... try another way
Apr 25 14:35:10 synoupgrade: ninstaller.c:482 /tmpRoot/usr/syno/etc/www/DSM.json not exist
Apr 25 14:35:10 synoupgrade: ninstaller.c:605 fail to get admin port from /tmpRoot/usr/syno/etc/www/DSM.json
Apr 25 14:35:10 synoupgrade: ninstaller.c:633 failed to get nvr key from [/tmpRoot/etc.defaults/synoinfo.conf].
Apr 25 14:35:10 synoupgrade: ninstaller.c:783 fail to read [unique] from [/tmpRoot//etc.defaults/synoinfo.conf]
Apr 25 14:35:10 synoupgrade: ninstaller.c:851 unique not match
Apr 25 14:35:10 synoupgrade: ninstaller.c:1311 SYSTEM_NORMAL, [Recoverable=0]
Apr 25 14:35:10 synoupgrade: ninstaller.c:225 umount partition /tmpRoot
Apr 25 14:35:10 synoupgrade: ninstaller.c:1244(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0
Apr 25 14:35:10 synoupgrade: ninstaller.c:1245(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData
Apr 25 14:35:10 synoupgrade: ninstaller.c:1327 gblSupportRaid: 1, gSysStatus: 1, gblCreateDataVol: 0, gblSystemRecoverable: 0
Apr 25 14:35:10 synossdcache: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 25 14:35:10 kernel: [  186.069813] EXT4-fs (md0): barriers disabled
Apr 25 14:35:10 kernel: [  186.082046] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:35:10 synossdcache: synossdcache.c:38 Fail to get unique from /tmpRoot/etc.defaults/synoinfo.conf
Apr 25 14:35:10 synossdcache: ninstaller.c:225 umount partition /tmpRoot
Apr 25 14:35:25 synoupgrade: synoupgrade.c:1912 Unknown param action=get_state
Apr 25 14:35:25 synoupgrade: synoupgrade.c:1912 Unknown param _dc=1493130925533
Apr 25 14:35:25 synoupgrade: synoupgrade.c:1912 Unknown param _dc=1493130925533
Apr 25 14:35:26 synoupgrade: ninstaller.c:721 Dev: sdc, DiskPath: /dev/sdc, Partition version: 8
Apr 25 14:35:26 synoupgrade: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 25 14:35:26 kernel: [  202.492132] EXT4-fs (md0): barriers disabled
Apr 25 14:35:26 kernel: [  202.504737] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:35:26 synoupgrade: ninstaller.c:225 umount partition /tmpRoot
Apr 25 14:35:27 synoupgrade: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 25 14:35:27 kernel: [  202.573450] EXT4-fs (md0): barriers disabled
Apr 25 14:35:27 kernel: [  202.585653] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:35:27 synoupgrade: ninstaller.c:225 umount partition /tmpRoot
Apr 25 14:35:27 synoupgrade: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 25 14:35:27 kernel: [  202.606297] EXT4-fs (md0): barriers disabled
Apr 25 14:35:27 kernel: [  202.618673] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:35:27 synoupgrade: ninstaller.c:538 failed to get upnpmodelname from [/tmpRoot/etc.defaults/synoinfo.conf].
Apr 25 14:35:27 synoupgrade: ninstaller.c:545 failed to get buildnumber from [/tmpRoot/etc.defaults/VERSION].
Apr 25 14:35:27 synoupgrade: ninstaller.c:552 failed to get productversion from [/tmpRoot/etc.defaults/VERSION].
Apr 25 14:35:27 synoupgrade: ninstaller.c:554 failed to get majorversion from [/tmpRoot/etc.defaults/VERSION].
Apr 25 14:35:27 synoupgrade: ninstaller.c:557 failed to get minorversion from [/tmpRoot/etc.defaults/VERSION].
Apr 25 14:35:27 synoupgrade: lib/system/system_platform_get.c:35 failed to get unique from /tmpRoot/etc.defaults/synoinfo.conf errno=[0x0900 file_get_key_value.c:29]
Apr 25 14:35:27 synoupgrade: ninstaller.c:569 failed to get platform from [/tmpRoot/etc.defaults/synoinfo.conf].
Apr 25 14:35:27 synoupgrade: lib/system/system_max_align_get.c:86 [/tmpRoot/.system_info/pgsql_alignment] doesn't exist, check model name for alignment
Apr 25 14:35:27 synoupgrade: lib/system/system_endian_get.c:61 [/tmpRoot/.system_info/endian] doesn't exist, check model name for endian
Apr 25 14:35:27 synoupgrade: lib/system/system_bit_get.c:57 [/tmpRoot/.system_info/bits] doesn't exist, check model name for bits
Apr 25 14:35:27 synoupgrade: ninstaller.c:602 fail to get admin port from /tmpRoot/etc/synoinfo.conf... try another way
Apr 25 14:35:27 synoupgrade: ninstaller.c:482 /tmpRoot/usr/syno/etc/www/DSM.json not exist
Apr 25 14:35:27 synoupgrade: ninstaller.c:605 fail to get admin port from /tmpRoot/usr/syno/etc/www/DSM.json
Apr 25 14:35:27 synoupgrade: ninstaller.c:633 failed to get nvr key from [/tmpRoot/etc.defaults/synoinfo.conf].
Apr 25 14:35:27 synoupgrade: ninstaller.c:783 fail to read [unique] from [/tmpRoot//etc.defaults/synoinfo.conf]
Apr 25 14:35:27 synoupgrade: ninstaller.c:851 unique not match
Apr 25 14:35:27 synoupgrade: ninstaller.c:1311 SYSTEM_NORMAL, [Recoverable=0]
Apr 25 14:35:27 synoupgrade: ninstaller.c:225 umount partition /tmpRoot
Apr 25 14:35:27 synoupgrade: ninstaller.c:1244(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0
Apr 25 14:35:27 synoupgrade: ninstaller.c:1245(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData
Apr 25 14:35:27 synoupgrade: ninstaller.c:1327 gblSupportRaid: 1, gSysStatus: 1, gblCreateDataVol: 4:35:30 kernel: [  206.462681] md/raid1:md0: active with 1 out of 12 mirrors
Apr 25 14:35:30 kernel: [  206.468090] md0: detected capacity change from 0 to 2549940224
Apr 25 14:35:30 synodiskport: external/external_disk_port_check.c:100 expected sdx or /dev/sdx, not md, not match any port type
Apr 25 14:35:33 synodiskport: external/external_disk_port_check.c:100 expected sdx or /dev/sdx, not md, not match any port type
Apr 25 14:35:33 kernel: [  209.505408] md: bind
Apr 25 14:35:33 kernel: [  209.508317] md/raid1:md1: active with 1 out of 12 mirrors
Apr 25 14:35:33 kernel: [  209.513723] md1: detected capacity change from 0 to 2147418112
Apr 25 14:35:33 raidtool: raidtool.c:685 system inited on [/dev/sdc1 ], [/dev/sdc2 ]
Apr 25 14:35:33 synodiskport: external/external_disk_port_check.c:100 expected sdx or /dev/sdx, not md, not match any port type
Apr 25 14:35:33 kernel: [  209.521132]  md1: unknown partition table
Apr 25 14:35:33 kernel: [  209.530177]  md0: unknown partition table
Apr 25 14:35:34 kernel: [  209.824996] EXT4-fs (md0): barriers disabled
Apr 25 14:35:34 kernel: [  209.837066] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:35:34 install.cgi: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 25 14:35:34 kernel: [  209.870398] EXT4-fs (md0): barriers disabled
Apr 25 14:35:34 install.cgi: ninstaller.c:225 umount partition /tmpRoot
Apr 25 14:35:34 kernel: [  209.882311] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:35:34 install.cgi: ninstaller.c:2305 retv=[0]
Apr 25 14:35:34 install.cgi: ninstaller.c:2310(ErrFHOSTDoFdiskFormat) retv=[0]
Apr 25 14:35:34 install.cgi: ninstaller.c:196 Mount partion /dev/md0 /tmpData
Apr 25 14:35:34 kernel: [  209.896896] EXT4-fs (md0): barriers disabled
Apr 25 14:35:34 kernel: [  209.909308] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
Apr 25 14:36:56 install.cgi: Remove /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1]
Apr 25 14:36:56 install.cgi: Create /tmpData/upd@te...cmd=[/bin/mkdir -p /tmpData/upd@te > /dev/null 2>&1]
Apr 25 14:36:56 install.cgi: Untar /tmpData/upd@te.pat...cmd=[/bin/tar xpf "/tmpData/upd@te.pat" -C /tmpData/upd@te > /dev/null 2>&1]
Apr 25 14:36:56 install.cgi: ErrFHOSTCheckUpgradeFile: Remove /tmpData/upd@te.pat...
Apr 25 14:36:56 install.cgi: Verify codesign of [/tmpData/upd@te]...
Apr 25 14:36:57 install.cgi: Verify checksum of [/tmpData/upd@te]...
Apr 25 14:36:58 install.cgi: Pass checksum of /tmpData/upd@te...
Apr 25 14:36:58 updater: updater.c:5796 Start of the updater...
Apr 25 14:36:58 updater: updater.c:2719 orgBuildNumber = 15047, newBuildNumber=15047
Apr 25 14:36:58 updater: updater_util.c:49 fail to read company in /tmpRoot//etc.defaults/synoinfo.conf
Apr 25 14:36:58 updater: file_check_key_value.c:25 SLIBCFileGetKeyValue(runccc) failed [0x0900 file_get_key_value.c:29]
Apr 25 14:36:58 updater: updater.c:6051 ==== Start flash update ====
Apr 25 14:36:58 updater: updater.c:6055 This is X86 platform
Apr 25 14:36:58 updater: boot/boot_lock.c(226): failed to mount boot device /dev/synoboot2 /tmp/bootmnt (errno:2)
Apr 25 14:36:58 updater: updater.c:5606 Failed to mount boot partition
Apr 25 14:36:58 updater: updater.c:2618 No need to reset reason for v.15047
Apr 25 14:36:58 updater: updater.c:6570 Failed to accomplish the update! (errno = 21)
Apr 25 14:36:58 install.cgi: ninstaller.c:1779 Executing [/tmpData/upd@te/updater -v /tmpData > /dev/null 2>&1] error[21]
Apr 25 14:36:59 install.cgi: ninstaller.c:196 Mount partion /dev/md0 /tmpRoot
Apr 25 14:36:59 install.cgi: ninstaller.c:1748 Moving updater for configuration upgrade...cmd=[/bin/mv -f /tmpData/upd@te/updater /tmpRoot/.updater > /dev/null 2>&1]
Apr 25 14:36:59 install.cgi: ninstaller.c:225 umount partition /tmpRoot
Apr 25 14:36:59 install.cgi: ErrFHOSTCleanPatchDirFile: After updating /tmpData/upd@te...cmd=[/bin/rm -rf /t

DiskStation> lsmod
Module                  Size  Used by    Tainted: P
usbhid                 25223  0
hid                    82276  1 usbhid
broadwell_synobios     44394  0
button                  4440  0
ax88179_178a           12012  0
usbnet                 17781  1 ax88179_178a
tg3                   149376  0
r8169                  54371  0
bnx2x                1417616  0
bnx2                   73633  0
vmxnet3                36741  0
pcnet32                30594  0
e1000                  99699  0
sfc                   154427  0
netxen_nic             96660  0
qlge                   77290  0
qlcnic                227416  0
qla3xxx                36545  0
pch_gbe                33267  0
ptp_pch                 5646  1 pch_gbe
sky2                   46798  0
skge                   29459  0
jme                    34105  0
ipg                    15837  0
uio                     7600  0
alx                    25873  0
atl1c                  34188  0
atl1e                  27956  0
atl1                   30566  0
libphy                 18061  1 tg3
mii                     3763  8 ax88179_178a,usbnet,r8169,pcnet32,pch_gbe,jme,ipg,atl1
libcrc32c                898  1 bnx2x
ixgbe                 250024  0
igb                   175037  0
i2c_algo_bit            5120  1 sfc
e1000e                169017  0
dca                     4512  2 ixgbe,igb
vfat                   10143  0
fat                    50319  1 vfat
mdio                    3293  3 bnx2x,sfc,alx
sg                     24881  0
mpt3sas               281913  0
mpt2sas               238978  0
megaraid_sas           72622  2
ata_piix               23344  0
mptctl                 26101  0
mptsas                 38463  0
mptspi                 12916  0
mptscsih               18705  2 mptsas,mptspi
mptbase                61898  4 mptctl,mptsas,mptspi,mptscsih
scsi_transport_spi     19098  1 mptspi
megaraid               37746  0
megaraid_mbox          27683  0
megaraid_mm             7552  1 megaraid_mbox
vmw_pvscsi             15239  0
BusLogic               21185  0
usb_storage            47709  0
etxhci_hcd             84394  0
xhci_hcd               84124  0
uhci_hcd               22419  0
ohci_hcd               20680  0
usbcore               174990  8 usbhid,ax88179_178a,usbnet,usb_storage,etxhci_hcd,xhci_hcd,uhci_hcd,ohci_hcd
usb_common              1544  1 usbcore
mv14xx                533289  0
DiskStation>

 

Hide  

md issue?

Link to post
Share on other sites

I'm running 6.0.2 with update 11 on ESXi and after a few hours I notice the following issues (it works immidiately after the install/upgrade):

[*]The General tab in the control panel goes blank

[*]The Resource Manager doesn't work and says "Connection failed"

[*]SNMP reporting stops working

 

I have set a valid (new) serial number as that was required in order to get PhotoStation to convert videos. Any idea on how to solve the other two remaining issues?

For now I can't find any helpful information in the logs.

 

Edit: I wonder if this is a bug in SNMP. Once activated it reports for just a few minutes and then stops. After that Resource Manager and the General info can't be launched. Disabling SNMP doesn't resolve it.

Edited by Guest
Link to post
Share on other sites
I'm running 6.0.2 with update 11 on ESXi and after a few hours I notice the following issues (it works immidiately after the install/upgrade):

[*]The General tab in the control panel goes blank

 

I get this error too in 6.1 if I use more cores than the original NAS have.

Link to post
Share on other sites
I'm running 6.0.2 with update 11 on ESXi and after a few hours I notice the following issues (it works immidiately after the install/upgrade):

[*]The General tab in the control panel goes blank

 

I get this error too in 6.1 if I use more cores than the original NAS have.

How many cores do you have configured? I'm using 2 which should be similar to the original if I'm not mistaken. I'm using 8 GB of RAM instead of the default 4. After some more testing it looks almost random if the page shows up or not. I'm totally confused.

Link to post
Share on other sites

Ok. There might be a connection, but after playing around with both the memory and cpu cores count it seems random wether the tab page works or not. I guess you're onto something, but it's hard to debug without any useful info in the logs. :/

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.