IG-88 Posted March 19, 2018 Share #3901 Posted March 19, 2018 On 3/14/2018 at 11:35 AM, ericavd said: BTW, I just order a cheap used 8-Port SATA/PCI-X Controller SATA II 3Gbps Card (with Marvell 88SX6081 Chip). Not knowing the compatibility. I will post the results when I have it. 88SX6081 https://ata.wiki.kernel.org/index.php/SATA_hardware_features -> sata_mv.ko all sata_*.ko (also (sata_mv.ko) are broken in dsm 6.1 kernel source from synology, so no luck when it comes to this controller there are cheap 4-port marvel controller that use the ahci diver, if it has to be 8-port then maybe this helps Quote Link to comment Share on other sites More sharing options...
error403 Posted March 27, 2018 Share #3902 Posted March 27, 2018 Jun 1.02b seems to work fine on my old ASUS e2km1l-deluxe AMD-based machine. Are there problems to expect from running on AMD platform, or would I've hit those problem already during install if existent? Quote Link to comment Share on other sites More sharing options...
Dfds Posted March 27, 2018 Share #3903 Posted March 27, 2018 1 hour ago, error403 said: Jun 1.02b seems to work fine on my old ASUS e2km1l-deluxe AMD-based machine. Are there problems to expect from running on AMD platform, or would I've hit those problem already during install if existent? No, if you've managed to install it & everything's working you should be ok. Quote Link to comment Share on other sites More sharing options...
error403 Posted March 27, 2018 Share #3904 Posted March 27, 2018 19 minutes ago, Dfds said: No, if you've managed to install it & everything's working you should be ok. thank you! Quote Link to comment Share on other sites More sharing options...
Bose321 Posted March 29, 2018 Share #3905 Posted March 29, 2018 Not booting anymore for me on VMWare Workstation with 1.02 ds3617 loader. It does say it boots, but nothing on the network. Quote Link to comment Share on other sites More sharing options...
flyride Posted March 29, 2018 Share #3906 Posted March 29, 2018 Is that after attempting the 6.1.6 update? If so, you should be posting in the Critical Updates section in the 6.1.6 thread Quote Link to comment Share on other sites More sharing options...
ericarthurc Posted April 11, 2018 Share #3907 Posted April 11, 2018 Just wanted to say than you for all the work being done here; I have implemented these nas setups with out fail on a couple systems. But also wanted to share this info if people were interested; I have a VmWare ESXi 6.5 server running a AMD Ryzen 5 1600 cpu, and using the DS3617xs 6.1 v1.0aplha vmware images (after converting the vmware to ESXi 6.5) it booted up just fine and have had no issues; running DSM 6.1.6. Here is my cpuinfo from ssh on the system: cat /proc/cpuinfo /$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 23 model : 1 model name : AMD Ryzen 5 1600 Six-Core Processor stepping : 1 cpu MHz : 3192.916 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm nopl eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw arat xsaveopt fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap bogomips : 6385.83 TLB size : 2560 4K pages clflush size : 64 cache_alignment : 64 address sizes : 43 bits physical, 48 bits virtual power management: processor : 1 vendor_id : AuthenticAMD cpu family : 23 model : 1 model name : AMD Ryzen 5 1600 Six-Core Processor stepping : 1 cpu MHz : 3192.916 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm nopl eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw arat xsaveopt fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap bogomips : 6386.84 TLB size : 2560 4K pages clflush size : 64 cache_alignment : 64 address sizes : 43 bits physical, 48 bits virtual power management: Hide Quote Link to comment Share on other sites More sharing options...
deejaysyky Posted April 19, 2018 Share #3908 Posted April 19, 2018 Hi, please do some driver for HP hpsa: Smart Array P840 thank you Quote Link to comment Share on other sites More sharing options...
sbv3000 Posted May 10, 2018 Share #3909 Posted May 10, 2018 3 hours ago, rikadoo said: Always download manual in DSM en then i install it. I have 6 sataports on my motherboard and an M1015 SAS controller. I don`t know the exact drives that are not seen but i thought it was from my SAS card. So it looks like you have 14 drive channels (6+8) but 12 is the default unless syno info.conf is altered but somehow it looks like your sataport edit is fixing it until update. I would check and ensure your 9 drives are connected to the first 9 channels (6 onboard and 3 sas) but you will need to determine the drive numbers/channels in DSM. If your 9 drives are on the first 9 channels seen by DSM no config changes should be needed and no rebuilds on update Quote Link to comment Share on other sites More sharing options...
vortexxx Posted May 15, 2018 Share #3910 Posted May 15, 2018 Good day, and many thanks for all boot loaders, in the future you make boot loader for 6.2? 2 Quote Link to comment Share on other sites More sharing options...
kaktuss77 Posted July 6, 2018 Share #3911 Posted July 6, 2018 Hello, I have a question about the 918+ and jun's 1.03a loader, Is the 918+ and the jun's loader support 12disks by default? or 4? Because I have a 3617xs with 14disks mod. Thanks Quote Link to comment Share on other sites More sharing options...
vortexxx Posted July 6, 2018 Share #3912 Posted July 6, 2018 10 минут назад, kaktuss77 сказал: Hello, I have a question about the 918+ and jun's 1.03a loader, Is the 918+ and the jun's loader support 12disks by default? or 4? Because I have a 3617xs with 14disks mod. Thanks I try 4 disk setup. Its work but unstable. ISCSI work, but under big load freezes. 6.17 3617 its fine. Quote Link to comment Share on other sites More sharing options...
kaktuss77 Posted July 6, 2018 Share #3913 Posted July 6, 2018 Il y a 5 heures, vortexxx a dit : I try 4 disk setup. Its work but unstable. ISCSI work, but under big load freezes. 6.17 3617 its fine. Okay thanks for answered me. thats you describe is only with 1.03a loader or with 1.02b too? I have 2 x 10Gbps port, for my iSCSI target (Windows 10, 6Tb target for games etc), I allready use ds3617xs image with 1.02b loader, work great 1 Quote Link to comment Share on other sites More sharing options...
IG-88 Posted July 6, 2018 Share #3914 Posted July 6, 2018 8 hours ago, kaktuss77 said: I have a question about the 918+ and jun's 1.03a loader, Is the 918+ and the jun's loader support 12disks by default? or 4? Because I have a 3617xs with 14disks mod. yes. default is 12, i tested with one disk on port 4 and another on port 12 maxdisk is 12 anf internal disk 0xff (as in 916+) but it shows 12 disk and seems to work 1 Quote Link to comment Share on other sites More sharing options...
coalfield Posted July 27, 2018 Share #3915 Posted July 27, 2018 Maybe a silly question but where are the links to Jun's v1.03a2 loader? Quote Link to comment Share on other sites More sharing options...
CrazyCreator Posted July 27, 2018 Share #3916 Posted July 27, 2018 (edited) Jun's Loader on Mega Edited July 27, 2018 by CrazyCreator 1 Quote Link to comment Share on other sites More sharing options...
IG-88 Posted July 28, 2018 Share #3917 Posted July 28, 2018 1st post (from @jun) in this thread, 3rd word "here", thats the link @CrazyCreator posted Quote Link to comment Share on other sites More sharing options...
llxbr Posted September 29, 2018 Share #3918 Posted September 29, 2018 (edited) Добрый день. Извините за мой английский, я использую google translate. Мне нужен загрузчик v1.03b для 3617 с разделом GPT? BIOS материнской платы не поддерживает загрузку Legacy. (Asrock J5005-ITX, BIOS обновлен до 1.40) Те загрузчики, которые выложены здесь v1.03b 3617 с разделом MBR. Edited September 29, 2018 by llxbr Quote Link to comment Share on other sites More sharing options...
llxbr Posted September 29, 2018 Share #3919 Posted September 29, 2018 Good afternoon. Sorry for my English, i use google translate. I need a bootloader v1.03b for 3617 with a GPT partition? The BIOS of the motherboard does not support Legacy boot. (Asrock J5005-ITX, bios updated to 1.40 ) Those loaders that are laid out here v1.03b for 3617 with MBR partition. Quote Link to comment Share on other sites More sharing options...
sbv3000 Posted September 29, 2018 Share #3920 Posted September 29, 2018 13 minutes ago, llxbr said: Good afternoon. Sorry for my English, i use google translate. I need a bootloader v1.03b for 3617 with a GPT partition? The BIOS of the motherboard does not support Legacy boot. (Asrock J5005-ITX, bios updated to 1.40 ) Those loaders that are laid out here v1.03b for 3617 with MBR partition. I have an Asrock j3455 with similar bios, works ok with mbr / non-uefi Try Bios> Advanced> Enable Legacy USB support Then try Boot> Device and see if the legacy USB appears Quote Link to comment Share on other sites More sharing options...
llxbr Posted September 29, 2018 Share #3921 Posted September 29, 2018 (edited) на J5005 в BIOS нет поддержки Legacy USB. У меня есть еще один J4205, есть поддержка Legacy USB, и там все работает. Edited September 29, 2018 by llxbr Quote Link to comment Share on other sites More sharing options...
llxbr Posted September 29, 2018 Share #3922 Posted September 29, 2018 on the J5005 in the BIOS there is no Legacy USB support. I have another J4205, there is support for Legacy USB, and there everything works. Quote Link to comment Share on other sites More sharing options...
jeromim Posted October 12, 2018 Share #3923 Posted October 12, 2018 Help! - Outcome of the installation / update: SUCCESSFUL - DSM version: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.02b - DS3615xs - Using custom extra.lzma: NO - Installation type: Baremetal Optiplex 9020 - Additional comments: None Good evening, I upgraded to DSM 6.2-23739 Update 2 and did not know though, it works perfectly. with loader v.1.02b! Now is the doubt, I put jun load 1.03b and I upgrade to DSM 6.2.1.23824 Update 2? or leave it the way it is? ************************************************** ************************************** DO NOT update to DSM 6.2 with loader v.1.02b. It will not work. I repeat. DO NOT update to DSM 6.2 Quote Link to comment Share on other sites More sharing options...
apejovic Posted November 15, 2018 Share #3924 Posted November 15, 2018 On 9/20/2016 at 11:57 PM, jun said: Loader Download: here / (link updated due to directory structure change of mega share) -- by jun 2-28 Link is down?? Quote Link to comment Share on other sites More sharing options...
bearcat Posted November 15, 2018 Share #3925 Posted November 15, 2018 @apejovic Try one of the links here as they are working Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.