Jaronstrypsteen Posted March 17, 2017 Share #2326 Posted March 17, 2017 My DSM 5.2 was doing weird stuff so I decided to do a clean install of DSM 6.0.2. I can't get QuickConnect to work (I need it because I can't port forward here). It worked in 5.2 with a serial and mac address from the excel file. I used the same sn and mac on DSM 6 and n can't even log in. Tried a new sn and mac, still nothing. Reinstalled 5.2 and used the old (from when it worked) sn and mac and still not working. Used again a new sn and mac and still not working. Can anybody help me with this? Quote Link to comment Share on other sites More sharing options...
Aigor Posted March 17, 2017 Share #2327 Posted March 17, 2017 Ive managed to get the ASM1062 Sata PCI-E Card running on a passthrough. But its using the baremetal login. Is there a way to make it so the ESXi version pulls the driver for it? Look that Quote Link to comment Share on other sites More sharing options...
Black6spdZ Posted March 17, 2017 Share #2328 Posted March 17, 2017 There are some brave souls here willing to run a NAS as a VM.. Do the benefits really out weigh the risks? Why not open a new thread? This is a forum and not a chatboard. Once again the question: are there any Mods around here? Are we really going there with the semantics? The terms message board and forum are pretty much used interchangeably ever since the dawn of internet. Since we are talking about mainly DSM 6.1 in the thread labeled 6.0.2, a new thread should have been started weeks ago. Quote Link to comment Share on other sites More sharing options...
Barrow1990 Posted March 17, 2017 Share #2329 Posted March 17, 2017 Ive managed to get the ASM1062 Sata PCI-E Card running on a passthrough. But its using the baremetal login. Is there a way to make it so the ESXi version pulls the driver for it? Look that I have no issue seeing them in esxi, or any other vm baring when i load juns esxi vm loader. Even works fine on the baremetal in a vm Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
neonflx Posted March 17, 2017 Share #2330 Posted March 17, 2017 Just wait a day or two and then report again everything still working even my mellanox that did not work before No volume crashes or funky messages? none so far , the only thing i needed to do was delete my 3rd party sources and add them again, and IDS wasn't compatible so i deleted it Quote Link to comment Share on other sites More sharing options...
fonix232 Posted March 17, 2017 Share #2331 Posted March 17, 2017 There are some brave souls here willing to run a NAS as a VM.. Do the benefits really out weigh the risks? Why not open a new thread? This is a forum and not a chatboard. Once again the question: are there any Mods around here? Are we really going there with the semantics? The terms message board and forum are pretty much used interchangeably ever since the dawn of internet. Since we are talking about mainly DSM 6.1 in the thread labeled 6.0.2, a new thread should have been started weeks ago. Yes we are. This is a topic for Jun's loader, let it be for 6.0.2 or 6.1 - your question however is totally off topic and should be in a separate thread. Don't try to play smart. Quote Link to comment Share on other sites More sharing options...
Black6spdZ Posted March 18, 2017 Share #2332 Posted March 18, 2017 Are we really going there with the semantics? The terms message board and forum are pretty much used interchangeably ever since the dawn of internet. Since we are talking about mainly DSM 6.1 in the thread labeled 6.0.2, a new thread should have been started weeks ago. Yes we are. This is a topic for Jun's loader, let it be for 6.0.2 or 6.1 - your question however is totally off topic and should be in a separate thread. Don't try to play smart. I didn't specifically mention XPEnology DSM in my question, but since I posted it here in this thread I'mm sure most would assume that is what i was talking about seeing how there is a vmdx for Jun's loader.. tell me how it wasn't relevant to the discussion? This is honestly the first place I've seen mentioned about running a NAS inside a VM. Quote Link to comment Share on other sites More sharing options...
Nebroth Posted March 18, 2017 Share #2333 Posted March 18, 2017 Any update on the "Disks have crashed" issue? Quote Link to comment Share on other sites More sharing options...
haydibe Posted March 18, 2017 Share #2334 Posted March 18, 2017 *cough* kernel sources for 6.1 have been released 3 days ago. Finaly the community is able to safely compile drivers Quote Link to comment Share on other sites More sharing options...
fonix232 Posted March 18, 2017 Share #2335 Posted March 18, 2017 Are we really going there with the semantics? The terms message board and forum are pretty much used interchangeably ever since the dawn of internet. Since we are talking about mainly DSM 6.1 in the thread labeled 6.0.2, a new thread should have been started weeks ago. Yes we are. This is a topic for Jun's loader, let it be for 6.0.2 or 6.1 - your question however is totally off topic and should be in a separate thread. Don't try to play smart. I didn't specifically mention XPEnology DSM in my question, but since I posted it here in this thread I'mm sure most would assume that is what i was talking about seeing how there is a vmdx for Jun's loader.. tell me how it wasn't relevant to the discussion? This is honestly the first place I've seen mentioned about running a NAS inside a VM. Your question was whether it's worth to run a NAS OS in a VM. Completely unrelated to the actual topic of the loader. Here, discussion should be limited to the following topics: a, Discussion of usage of the loader b, Discussion of bugs/missing drivers of the loader c, Discussion of possible upgrades to the loader (e.g. if 6.2 introduces a new defense mechanism, like they did with 5.something with the PCIe device check) Your topic falls into neither of these topics. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted March 19, 2017 Share #2336 Posted March 19, 2017 Thanks for taking your contentious away from the main thread and sticking to topic. Both. Quote Link to comment Share on other sites More sharing options...
OBWANDO Posted March 19, 2017 Share #2337 Posted March 19, 2017 Wrote a few days ago (pg 225) about running 3617x version of 1.02a and the drive issues. Moving over to 3615 and 6.1 (DSM_DS3615xs_15047.pat) worked great. That said... 5.2 was quite a bit faster on file transfers, and I added a SSD to the mix just to see if it made any difference on 6.1 (knowing for large file transfers it wouldnt). on 5.2 I was able to consistently max out the 10GB line at 850-950+ MB/sec. on 6.1 I get spikes up to about 500, but it nosedives down to 100-150, then perks up to about 200, but not much better So i'm a bit bummed there because i like 6.x series as my real Syno runs it (yep supported the company as well). For reference I'm using a LSI9211-8 on a Supermicro X10SDV-4C-TLN2F-O Xeon D-1521 board. My question is this... Does anyone think that with the new 6.1 drop, that any of the new compiles will make any tangible difference? Also, anyone know if M.2 SSD might be supported? would be amazing for cache at the 10GB speeds since single SSD is going to max out at 500. Quote Link to comment Share on other sites More sharing options...
mark0x01 Posted March 19, 2017 Share #2338 Posted March 19, 2017 I'm happy to report a successful install on a Proware Pronas SN-1400 with Supermicro X7SPA-H board. No issues with boot from USB, initial discovery and install followed by updating with SP8. I'm working to get the i2c monitoring, backplane led's and LCD display to work. This will need a few packages built when I get time. Mark. Quote Link to comment Share on other sites More sharing options...
DrEVILish Posted March 19, 2017 Share #2339 Posted March 19, 2017 I've been trying for the last couple of days to install XPEnology on my Dell PowerEdge R510, without any success currently. It boots the USB and gets to the Intro: screen i.e "Screen will stop updating shortly, please open http:/.... to continue. _" Tested Juns - DS3615xs 6.1 v1.02a DS3615xs 6.1 v1.01 DS3615xs 6.1 v1.00 With the same outcomes... But the Synology assistant only shows my DS1812+ and not the Dell Server, I've also checked FING and can't see it on my network at all. The Network chip is a Broadcom BCM5716C0KPBG - Which I can see that the Broadcom 5716, is in the supported hardware list on this Forum. I'm booting using the Dell UEFI, rather than BIOS, using an LSI SAS HBA, might try with an add-in PCIe network card instead. Just added one of my PCIe Intel NICs into the server and booted straight away, but still can't see the Broadcom LOM's which are the ones I wanna be using, as the PCIe card is for another machine. Quote Link to comment Share on other sites More sharing options...
JBark Posted March 19, 2017 Share #2340 Posted March 19, 2017 HP Gen8 with integrated dual nic Upgrade is working but no network after reboot... I connect to my Gen8 with iLO VSP (iLO Virtual Serial Port) and I found that there are 2 file missing from /lib/modules after upgrade: libphy.ko and tg3.ko I have found these two files under /lib/modules/update so I copied them under /lib/modules (don't forget to chmod 644 them) and reboot... now network is working again. I think, as Jun's said, there's something related to update script to fix... but, as other said, clean install work. Ciao ema Confirming this worked for me as well on my Gen8. I needed to get up to 6.1 so I could finally update to the newest phpVirtualBox, and this was my only option. I'm getting the "failed storage space" for my single SSD at boot, but everything runs fine so that's not really a big deal. Quote Link to comment Share on other sites More sharing options...
fonix232 Posted March 19, 2017 Share #2341 Posted March 19, 2017 I've been trying for the last couple of days to install XPEnology on my Dell PowerEdge R510, without any success currently. It boots the USB and gets to the Intro: screen i.e "Screen will stop updating shortly, please open http:/.... to continue. _" Tested Juns - DS3615xs 6.1 v1.02a DS3615xs 6.1 v1.01 DS3615xs 6.1 v1.00 With the same outcomes... But the Synology assistant only shows my DS1812+ and not the Dell Server, I've also checked FING and can't see it on my network at all. The Network chip is a Broadcom BCM5716C0KPBG - Which I can see that the Broadcom 5716, is in the supported hardware list on this Forum. I'm booting using the Dell UEFI, rather than BIOS, using an LSI SAS HBA, might try with an add-in PCIe network card instead. Just added one of my PCIe Intel NICs into the server and booted straight away, but still can't see the Broadcom LOM's which are the ones I wanna be using, as the PCIe card is for another machine. Make sure that your boot USB has been properly updated with the matching PID and VID. 9 out of 10 cases happens because of this. Quote Link to comment Share on other sites More sharing options...
boOmLa Posted March 19, 2017 Share #2342 Posted March 19, 2017 Wrote a few days ago (pg 225) about running 3617x version of 1.02a and the drive issues.Moving over to 3615 and 6.1 (DSM_DS3615xs_15047.pat) worked great. That said... 5.2 was quite a bit faster on file transfers, and I added a SSD to the mix just to see if it made any difference on 6.1 (knowing for large file transfers it wouldnt). on 5.2 I was able to consistently max out the 10GB line at 850-950+ MB/sec. on 6.1 I get spikes up to about 500, but it nosedives down to 100-150, then perks up to about 200, but not much better So i'm a bit bummed there because i like 6.x series as my real Syno runs it (yep supported the company as well). For reference I'm using a LSI9211-8 on a Supermicro X10SDV-4C-TLN2F-O Xeon D-1521 board. My question is this... Does anyone think that with the new 6.1 drop, that any of the new compiles will make any tangible difference? Also, anyone know if M.2 SSD might be supported? would be amazing for cache at the 10GB speeds since single SSD is going to max out at 500. wow 850-950mbs ? What SSD are you using - i had an Samsung 850 SSD in mine 5.2 and maxed out at 245Mbs - now running Synology DS916+II with 2 Samsung 850 SSD running Raid 0 and peeking at 310 when start transf, a 8GB file from a folder to another and gets down to 145Mbs .. I would love to hear more about your config - I'am running the Raid0 on btrfs as volume 1 - Had hoped to get much more speed with 2 ssd raid0, but still around 150-145Mbs Quote Link to comment Share on other sites More sharing options...
DrEVILish Posted March 19, 2017 Share #2343 Posted March 19, 2017 I've been trying for the last couple of days to install XPEnology on my Dell PowerEdge R510, without any success currently. It boots the USB and gets to the Intro: screen i.e "Screen will stop updating shortly, please open http:/.... to continue. _" Tested Juns - DS3615xs 6.1 v1.02a DS3615xs 6.1 v1.01 DS3615xs 6.1 v1.00 With the same outcomes... But the Synology assistant only shows my DS1812+ and not the Dell Server, I've also checked FING and can't see it on my network at all. The Network chip is a Broadcom BCM5716C0KPBG - Which I can see that the Broadcom 5716, is in the supported hardware list on this Forum. I'm booting using the Dell UEFI, rather than BIOS, using an LSI SAS HBA, might try with an add-in PCIe network card instead. Just added one of my PCIe Intel NICs into the server and booted straight away, but still can't see the Broadcom LOM's which are the ones I wanna be using, as the PCIe card is for another machine. Make sure that your boot USB has been properly updated with the matching PID and VID. 9 out of 10 cases happens because of this. Thanks for the information, how do I retrieve the PID & VID of my USB, I can use windows, linux and macOS. Quote Link to comment Share on other sites More sharing options...
Exxtreme Posted March 19, 2017 Share #2344 Posted March 19, 2017 I've been trying for the last couple of days to install XPEnology on my Dell PowerEdge R510, without any success currently. It boots the USB and gets to the Intro: screen i.e "Screen will stop updating shortly, please open http:/.... to continue. _" Tested Juns - DS3615xs 6.1 v1.02a DS3615xs 6.1 v1.01 DS3615xs 6.1 v1.00 With the same outcomes... But the Synology assistant only shows my DS1812+ and not the Dell Server, I've also checked FING and can't see it on my network at all. The Network chip is a Broadcom BCM5716C0KPBG - Which I can see that the Broadcom 5716, is in the supported hardware list on this Forum. I'm booting using the Dell UEFI, rather than BIOS, using an LSI SAS HBA, might try with an add-in PCIe network card instead. Just added one of my PCIe Intel NICs into the server and booted straight away, but still can't see the Broadcom LOM's which are the ones I wanna be using, as the PCIe card is for another machine. Make sure that your boot USB has been properly updated with the matching PID and VID. 9 out of 10 cases happens because of this. Thanks for the information, how do I retrieve the PID & VID of my USB, I can use windows, linux and macOS. There's tons of software that gives you that information... There's a search engine called Google that gives you that info much faster than asking obvious questions here... Quote Link to comment Share on other sites More sharing options...
fonix232 Posted March 19, 2017 Share #2345 Posted March 19, 2017 Okay, now I'm having the same issue. System set up properly, USB PID and VID matches, serial and MAC matches, aaaand it doesn't work. Nothing on the network. Nothing found by Synology's tool or find.synology.com. Interesting. Loader is v1.01, with the same USB drive I've been using for months. Quote Link to comment Share on other sites More sharing options...
boOmLa Posted March 19, 2017 Share #2346 Posted March 19, 2017 Okay, now I'm having the same issue. System set up properly, USB PID and VID matches, serial and MAC matches, aaaand it doesn't work. Nothing on the network. Nothing found by Synology's tool or find.synology.com. Interesting. Loader is v1.01, with the same USB drive I've been using for months. try rebooting ur router - had this issue the other day with my Synology DS916+II - after a router reboot I could find it with find.synology.com with no prob. Quote Link to comment Share on other sites More sharing options...
fonix232 Posted March 19, 2017 Share #2347 Posted March 19, 2017 Okay, now I'm having the same issue. System set up properly, USB PID and VID matches, serial and MAC matches, aaaand it doesn't work. Nothing on the network. Nothing found by Synology's tool or find.synology.com. Interesting. Loader is v1.01, with the same USB drive I've been using for months. try rebooting ur router - had this issue the other day with my Synology DS916+II - after a router reboot I could find it with find.synology.com with no prob. Been there, done that. I did the whole shebang of debugging for hours before posting it. The funny thing is that even my router won't show it, so it gets no IP address at all. Quote Link to comment Share on other sites More sharing options...
Rick67 Posted March 20, 2017 Share #2348 Posted March 20, 2017 Success Using Jun's loader 1.02a Modified using OSFmount with proper info (usb vid/pid, network mac, serial), then img burned to usb Synology 6.1 : DSM_DS3617xs_15047.pat Asrock J3710-ITX Using Intel network card (onboard realtek disabled in bios) Serial port activated in bios Using 4TB hd with basic configuration (no raid) Thanks again Jun Quote Link to comment Share on other sites More sharing options...
Kitaro Posted March 20, 2017 Share #2349 Posted March 20, 2017 Using Intel network card (onboard realtek disabled in bios) Hello, and you have what card of intel? At me with i210 doesn't boot. On a network the device isn't found. And on GA-N3150N-D3V in 2 days of operation - fell off absolutely. Quote Link to comment Share on other sites More sharing options...
sze Posted March 20, 2017 Share #2350 Posted March 20, 2017 Success Using Jun's loader 1.02a Modified using OSFmount with proper info (usb vid/pid, network mac, serial), then img burned to usb Synology 6.1 : DSM_DS3617xs_15047.pat Asrock J3710-ITX Using Intel network card (onboard realtek disabled in bios) Serial port activated in bios Using 4TB hd with basic configuration (no raid) Thanks again Jun Hi Rick67, take care. Everyone having trouble with DS3617. Use DS3615. DS 3617 will not work after few days. Made same experience and use now DS3615. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.