AntUst Posted February 28, 2017 Share #2051 Posted February 28, 2017 I connect to my Gen8 with iLO VSP (iLO Virtual Serial Port) Do you have any info on getting that to work? I tried it the other day and failed, so assumed it wasn't supported by XPE. Reboot your gen8 and enter bios (F9). If I remeber well you must disable BIOS serial console, because if you don't do it, when you launch VSP you will see gen8's bios console... Select "BIOS serial console & EMS" >> "BIOS Serial console port" and disable it. Now go to "System Options" >> "Serial Port Options" >> "Virtual Serial Port" >> I have enabled "COM1;IRQ4;3F8h-3FFh" Now exit Bios utility and reboot. Be sure to enable SSH access in iLO (Adrministration >> Access Setting) Now open an SSH session to ilo ip unknown:~ ema$ ssh 10.0.0.100 ema@10.0.0.100's password: User:ema logged-in to ILOXXXXXXXXXX.local(10.0.0.100 / XXXX::XXXX:XXXX:XXXX:XXXX) iLO Advanced 2.50 at Sep 23 2016 Server Name: gen8.lan Server Power: On >hpiLO-> ...and at ilo prompt you must launch VSP. Now restart DSM and you can see serial output and prompt login... >hpiLO-> VSP Virtual Serial Port Active: COM1 Starting virtual serial port. Press 'ESC (' to return to the CLI Session. gen8 login: PS sometimes I can't write anything via serial console, but I don't know why... EDIT ok, I figured it out... you must press return during post to activate serial console... Ciao ema Everything is super, thank you very much Quote Link to comment Share on other sites More sharing options...
x9drive9in Posted February 28, 2017 Share #2052 Posted February 28, 2017 Hi, I mistakenly update the dsm from 6.0 to 6.1 and now the system can't boot up...where can i download the jun's loader v1.02a? Thanks very much Quote Link to comment Share on other sites More sharing options...
Tho-kun Posted February 28, 2017 Share #2053 Posted February 28, 2017 Look in the first post: mega:///#F!BtFQ2DgC!JgomNP3X8V9EuwxL4TXbng!5kcjyJ7R Quote Link to comment Share on other sites More sharing options...
x9drive9in Posted February 28, 2017 Share #2054 Posted February 28, 2017 Look in the first post: mega:///#F!BtFQ2DgC!JgomNP3X8V9EuwxL4TXbng!5kcjyJ7R Thx very much, it works fine! Quote Link to comment Share on other sites More sharing options...
Tho-kun Posted February 28, 2017 Share #2055 Posted February 28, 2017 Anyone knows if it's save to use 6.1 even if there's always this error about crashed drives? I'm about to do a fresh install on my NAS at the moment. But if there will be an updated release in the next days, then i'll wait. If not i'd rather stay on 6.02 a little longer and wait for a "safer" release... Quote Link to comment Share on other sites More sharing options...
hellbondz Posted February 28, 2017 Share #2056 Posted February 28, 2017 I tried with force install and it worked, but now, every time my machine boots, this error comes up... Any ideas? Hi. I have the same problem. My update went great. I've updated from DS3615xs 6.0.2 u9 to DS3617xs 6.1 version without any problem. Settings migration went beautifully. The only problem is this error after reboot. Adding "syno_port_thaw=1" argument to normal boot does not help. Besides that everything looks like it's working. Quote Link to comment Share on other sites More sharing options...
uqaze Posted February 28, 2017 Share #2057 Posted February 28, 2017 Just tried the alpha bootloader, installed on a bare metal machine with a previously used disk on another version. Installed successfully, first try, no apparent problems on the system, will test further. Quote Link to comment Share on other sites More sharing options...
FiberInternetUser Posted March 1, 2017 Share #2058 Posted March 1, 2017 I was able to update my bare metal test system using jun's 1.02-Alpha DS3617xs to 6.1-15047 update 1. No problems encountered installing update 1. Quote Link to comment Share on other sites More sharing options...
DrSniper Posted March 1, 2017 Share #2059 Posted March 1, 2017 I was able to update my bare metal test system using jun's 1.02-Alpha DS3617xs to 6.1-15047 update 1. No problems encountered installing update 1. Could You say How You do that pls 1. 2. 3. And so on Quote Link to comment Share on other sites More sharing options...
boOmLa Posted March 1, 2017 Share #2060 Posted March 1, 2017 Anyone knows if it's save to use 6.1 even if there's always this error about crashed drives? I'm about to do a fresh install on my NAS at the moment. But if there will be an updated release in the next days, then i'll wait. If not i'd rather stay on 6.02 a little longer and wait for a "safer" release... Yes everything works just fine even though after every reboot u'll see this message ... Quote Link to comment Share on other sites More sharing options...
Tho-kun Posted March 1, 2017 Share #2061 Posted March 1, 2017 Hey! I found out that after doing an Factory Reset, the Error would be gone. Haven't seen it since then. But it seems like my favorite Apps aren't updated to 6.1 yet Need an Usenet Downloader, something like SABnbzD or NZBget. Anyone an idea if there's a similar software? As i've seen yet, no SABnzbd, no Midnight Commander.. :/ Quote Link to comment Share on other sites More sharing options...
boOmLa Posted March 1, 2017 Share #2062 Posted March 1, 2017 Hey!I found out that after doing an Factory Reset, the Error would be gone. Haven't seen it since then. But it seems like my favorite Apps aren't updated to 6.1 yet Need an Usenet Downloader, something like SABnbzD or NZBget. Anyone an idea if there's a similar software? Sounds good for a new fresh install, but otherwize wouldnt it erase alle your data on the drive ? seems like it from what i Read Quote Link to comment Share on other sites More sharing options...
cuspess Posted March 1, 2017 Share #2063 Posted March 1, 2017 What if I first remove existing HDDs (DSM 6) and USB drive (loader 6.01), create another USB drive with loader 6.02, plug it in with a spare HDD (not been used for xpenology), initialise all the setup, then plug back in all HDDs?? Would this method count as migrate? or fresh install?? If it works, I would want to unplug the spare HDD at the end, so to left with only those HDDs originally connected to my DSM 6 system. Quote Link to comment Share on other sites More sharing options...
Tho-kun Posted March 1, 2017 Share #2064 Posted March 1, 2017 Hey!I found out that after doing an Factory Reset, the Error would be gone. Haven't seen it since then. But it seems like my favorite Apps aren't updated to 6.1 yet Need an Usenet Downloader, something like SABnbzD or NZBget. Anyone an idea if there's a similar software? Sounds good for a new fresh install, but otherwize wouldnt it erase alle your data on the drive ? seems like it from what i Read yeah, it deleted everything on the drives. Complete fresh install. Quote Link to comment Share on other sites More sharing options...
Tho-kun Posted March 1, 2017 Share #2065 Posted March 1, 2017 I found something out. after i've edited the synoinfo.conf, deleted/commented out the supportraidgroup and added SHR again, the error reappeared. So it has something to do with SHR. Raid Group is still being shown in the Storage Manager, even if it's commented out. I'd upload some pictures, but it says there's no space left. nvm, used the /etc Folder, not etc.defaults. Error is still there. SHR is working tho. Quote Link to comment Share on other sites More sharing options...
fr8tra1n Posted March 1, 2017 Share #2066 Posted March 1, 2017 Hey!I found out that after doing an Factory Reset, the Error would be gone. Haven't seen it since then. But it seems like my favorite Apps aren't updated to 6.1 yet Need an Usenet Downloader, something like SABnbzD or NZBget. Anyone an idea if there's a similar software? As i've seen yet, no SABnzbd, no Midnight Commander.. :/ You can always install a SABnbzD or NZBGet docker image. Docker support exists as of DSM 6 and should provide you with a DSM-version independent install . Quote Link to comment Share on other sites More sharing options...
Tho-kun Posted March 1, 2017 Share #2067 Posted March 1, 2017 Hey!I found out that after doing an Factory Reset, the Error would be gone. Haven't seen it since then. But it seems like my favorite Apps aren't updated to 6.1 yet Need an Usenet Downloader, something like SABnbzD or NZBget. Anyone an idea if there's a similar software? As i've seen yet, no SABnzbd, no Midnight Commander.. :/ You can always install a SABnbzD or NZBGet docker image. Docker support exists as of DSM 6 and should provide you with a DSM-version independent install . Ohh, that's very nice If we could could get rid of this error, 6.1 would be so nice Quote Link to comment Share on other sites More sharing options...
boOmLa Posted March 1, 2017 Share #2068 Posted March 1, 2017 Hi all, I have a spare macmini (2012) I'am not using for anything - maybe it's a dumb quas but have some tried juns loader on a mac - and will it work at all on a mac. Would be cool to use it as a nas insted of not using it at all Thanx in advanced. Quote Link to comment Share on other sites More sharing options...
Gex Posted March 1, 2017 Share #2069 Posted March 1, 2017 Hi all, I have a spare macmini (2012) I'am not using for anything - maybe it's a dumb quas but have some tried juns loader on a mac - and will it work at all on a mac. Would be cool to use it as a nas insted of not using it at all Thanx in advanced. At least there's a post from 2015 which indicates that it used to work with 5.1. viewtopic.php?f=7&t=5026&start=60#p29661 So why don't you just go ahead and give it a try? Edit: Besides, a 2012 Mac Mini would (depending on its hardware configuration) still be worth a few hundred bucks, so you could still sell it and buy some hardware that is much better suited for an Xpenology system, including hard drives. Quote Link to comment Share on other sites More sharing options...
Sevennl Posted March 1, 2017 Share #2070 Posted March 1, 2017 (edited) Hello, Has anyone managed to convert this to QCOW2 or RAW format ? I want to run it on Proxmox and i managed to convert it to QCOW2 ( qemu-img and edit the .vmdk extent description removed the zero ) but it will not show up by find.synology.com or the assistant. Mounting the vmdk file as boot disk results in a lockup, only shows : booting from disk. Hope someone has figured this out. Edited March 1, 2017 by Guest Quote Link to comment Share on other sites More sharing options...
boOmLa Posted March 1, 2017 Share #2071 Posted March 1, 2017 Hi all, I have a spare macmini (2012) I'am not using for anything - maybe it's a dumb quas but have some tried juns loader on a mac - and will it work at all on a mac. Would be cool to use it as a nas insted of not using it at all Thanx in advanced. At least there's a post from 2015 which indicates that it used to work with 5.1. viewtopic.php?f=7&t=5026&start=60#p29661 So why don't you just go ahead and give it a try? Edit: Besides, a 2012 Mac Mini would (depending on its hardware configuration) still be worth a few hundred bucks, so you could still sell it and buy some hardware that is much better suited for an Xpenology system, including hard drives. Thanx for ur fast reply Gex i will try when i'am get home - yeah ur right about that, maybe i will Quote Link to comment Share on other sites More sharing options...
Rusty Posted March 1, 2017 Share #2072 Posted March 1, 2017 Hey!I found out that after doing an Factory Reset, the Error would be gone. Haven't seen it since then. But it seems like my favorite Apps aren't updated to 6.1 yet Need an Usenet Downloader, something like SABnbzD or NZBget. Anyone an idea if there's a similar software? As i've seen yet, no SABnzbd, no Midnight Commander.. :/ Add the SynoCommunity repo to the package manager. Quote Link to comment Share on other sites More sharing options...
Tho-kun Posted March 1, 2017 Share #2073 Posted March 1, 2017 Hey!I found out that after doing an Factory Reset, the Error would be gone. Haven't seen it since then. But it seems like my favorite Apps aren't updated to 6.1 yet Need an Usenet Downloader, something like SABnbzD or NZBget. Anyone an idea if there's a similar software? As i've seen yet, no SABnzbd, no Midnight Commander.. :/ Add the SynoCommunity repo to the package manager. That's like the first thing i do after a fresh install But those packages aren't updated for 6.1 yet i think. At least they weren't there this afternoon. Switched back to 6.02 for the moment. I'll wait a little while longer. Quote Link to comment Share on other sites More sharing options...
FiberInternetUser Posted March 1, 2017 Share #2074 Posted March 1, 2017 I was able to update my bare metal test system using jun's 1.02-Alpha DS3617xs to 6.1-15047 update 1. No problems encountered installing update 1. Could You say How You do that pls 1. 2. 3. And so on There are links on the OP to perform part of the following: 1. There is link to an excellent tutorial by Polanskiman on how to perform a fresh install of DSM6. Instructions are also good for DSM6.1 2. There is a link to jun's 1.02-Alpha DS3617xs image you need to create a bootable thumb drive. Only caveat is, if you experience drive errors on boot up, then jun suggests adding "syno_port_thaw=1" to the regular install in the grub.cfg file. 3. After I installed DSM 6.1-15047, I used the following link https://usdl.synology.com/download/DSM/criticalupdate/update_pack/15047-1/ and I downloaded "synology broadwell 3617xs.pat" which is update 1 for DSM 6.1-15047. 4. After the update 1 download, I performed a manual update. 5. I hope the information is helpful. Quote Link to comment Share on other sites More sharing options...
chrisund123 Posted March 1, 2017 Share #2075 Posted March 1, 2017 Hey!I found out that after doing an Factory Reset, the Error would be gone. Haven't seen it since then. But it seems like my favorite Apps aren't updated to 6.1 yet Need an Usenet Downloader, something like SABnbzD or NZBget. Anyone an idea if there's a similar software? As i've seen yet, no SABnzbd, no Midnight Commander.. :/ Add the SynoCommunity repo to the package manager. That's like the first thing i do after a fresh install But those packages aren't updated for 6.1 yet i think. At least they weren't there this afternoon. Switched back to 6.02 for the moment. I'll wait a little while longer. I'm running 6.1 with SAB, sickrage, couchpotato, transmission and Plex [WINKING FACE] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.