dgrigo Posted February 15, 2017 Share #1926 Posted February 15, 2017 anyone has been tested that cpu with xpenology ? this is a china i7 1151 cpu, have a great spec and have a great price http://ali.pub/7quix I am using i3 6320 with passmark score of 6025 at 50 W http://www.cpubenchmark.net/cpu.php?cpu ... 40+3.90GHz and is awesome. I was too considered the 6400t for the low wattage but i afraid it will give a very close score but the clocks are slow. If you get 6400t post your finding, sure it will work , but dunno on performance. My use of the synology is mainly for Emby Server and media files. Hope it helps /wave Quote Link to comment Share on other sites More sharing options...
Fizz Khalifa Posted February 15, 2017 Share #1927 Posted February 15, 2017 Hi, i'm running Jun's Loader 1.01 on a HP Microserver Gen8. I've noticed that hdd are always spinning, they don't go into hibernation. Could someone tell me if is this ok or i'm missing a step? On the power setting i set hibernation for sata to 10 minutes. I've resilio sync package installed but i tried stopping it with the same problem. Does HDD hibernation works for you? Thanks Hi There There are allot of services or packages that prevent hdd hibernation from occurring. I also have a Gen8 but never saw my drives enter hibernation. I have a real synology DS216J and it does hibernate the drives....but very rarely. Like once or twice a day maybe, sometimes not at all for 2 or 3 days. So it depends very much on what services or packages you are using. I found this on the Synology site which might help explain this : https://www.synology.com/en-global/knowledgebase/DSM/tutorial/General/What_stops_my_Synology_NAS_from_entering_System_Hibernation I have literally removed all packages and disabled all services, no difference. It's a pretty fresh install, too. I installed ipkg and iotop to monitor what is accessing the drive, and I see at the top: TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 4491 be/3 root 0.00 B/s 3.90 K/s 0.00 % 0.60 % [jbd2/md0-8] 12830 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.04 % [kworker/1:2] 4679 be/4 root 0.00 B/s 15.61 K/s 0.00 % 0.00 % syslog-ng -F --worker-threads= The top one, jbd2, is appearing up there every 2-3 seconds and disappears in the same second just to come again. This is fitting with the hdd led lighting up every few seconds, too. After a quick search i found out it is a journaling block service for ext4, but what is causing this to appear every few seconds? Could that be the service constantly accessing the drive? Or could it be this syslog-ng? Edit: Seems like it is constantly writing this into kern.log as well as messages: 2017-02-15T19:34:08+01:00 DS_Kevin kernel: [ 2253.772455] ACPI Error: [PGRT] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359) 2017-02-15T19:34:08+01:00 DS_Kevin kernel: [ 2253.772459] ACPI Error: Method parse/execution failed [\_GPE._L6F] (Node ffff8801690b5ec0), AE_NOT_FOUND (20130328/psparse-537) 2017-02-15T19:34:08+01:00 DS_Kevin kernel: [ 2253.772465] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L6F] (20130328/evgpe-580) These 3 lines come up several times a second, making the log files very big. Looks to me like a BIOS problem, maybe I'll try to update it. I would really like to know if anyone knows what could cause this permanent errors. Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted February 15, 2017 Share #1928 Posted February 15, 2017 I have the same errors I think so. I have problems with boot loops everytime I try to shutdown. Quote Link to comment Share on other sites More sharing options...
Guybrush2012 Posted February 18, 2017 Share #1929 Posted February 18, 2017 Need driver Support for Apollo Lake. Asrock J3455. Quote Link to comment Share on other sites More sharing options...
jaggerdude Posted February 19, 2017 Share #1930 Posted February 19, 2017 Hello, Was wondering if it's possible for multiple compatible configurations of DSM VMs could be mad to run simultaneously and share the same storage system? Thanks in advance. Jag Quote Link to comment Share on other sites More sharing options...
UGLYroid Posted February 21, 2017 Share #1931 Posted February 21, 2017 Hi, All. I have Baremetal Intel 5500PSL / 4x 2Tb onboard SATA / XPEnoboot 5.2-5967.1. Try to upgrade to 6.0.2 loader. Make new boot flash USB, enter vid & pid, but do the big mistake: accidentally upload DSM_DS3615xs_15047. Now, WebAssistant ask me again and againg: "Welcome back!" and show "Recover" button. I'm try all other boot option in grub menu, but nothing happens. What can I do now, that would not lose the information on the disks? Quote Link to comment Share on other sites More sharing options...
NoFate Posted February 21, 2017 Share #1932 Posted February 21, 2017 dont you have a spare hard disk or usb , where you can make a new boot? deattach your disk first, create a new boot, and attach it again to be safe? Quote Link to comment Share on other sites More sharing options...
UGLYroid Posted February 21, 2017 Share #1933 Posted February 21, 2017 dont you have a spare hard disk or usb , where you can make a new boot? deattach your disk first, create a new boot, and attach it again to be safe? I'm try this variant: off server, deattach boot USB flash , write img again on this flash, attach flash, boot. Nothing. Or you mean do not turn off server? Or I need another USB flash with another vid/pid? Quote Link to comment Share on other sites More sharing options...
NoFate Posted February 21, 2017 Share #1934 Posted February 21, 2017 another usb to be sure , and another disk to install dsm Quote Link to comment Share on other sites More sharing options...
UGLYroid Posted February 21, 2017 Share #1935 Posted February 21, 2017 Ок. Try this variant tomorow. Thanks. Quote Link to comment Share on other sites More sharing options...
sagrotan Posted February 21, 2017 Share #1936 Posted February 21, 2017 anyone has been tested that cpu with xpenology ? this is a china i7 1151 cpu, have a great spec and have a great price http://ali.pub/7quix Do you really want to buy Intel confidential CPUs? Gesendet von meinem SM-G800F mit Tapatalk Quote Link to comment Share on other sites More sharing options...
test4321 Posted February 22, 2017 Share #1937 Posted February 22, 2017 Did somebody already try Jun's Loader / DSM 6.0.2 on the new Apollo Lake boards (J3455/J4205)? Several times I've been reading "it should work" in this discussion, but it seems to me nobody actually tried? A few pages back somebody mentioned it’s not booting and I’ve been reading about problems using Ubuntu on Apollo Lake boards. Just want to have a confirmation before making a mistake in buying, I prefer to have a WORKING J3710 board over a black screen Apollo Lake Thanks! J3455 works well...no problems. If you buy it, UPDATE BIOS right away. 1.2 version is stable. 1.0 was s*** and wasnt working at all. Quote Link to comment Share on other sites More sharing options...
Guybrush2012 Posted February 22, 2017 Share #1938 Posted February 22, 2017 This is not correct. Asrock J3455 is Working but the Network is very very slow! Network Chipset is Realtek RTL 8111GR. Quote Link to comment Share on other sites More sharing options...
hannibal1969 Posted February 22, 2017 Share #1939 Posted February 22, 2017 This is not correct. Asrock J3455 is Working but the Network is very very slow! Network Chipset is Realtek RTL 8111GR. Are you sure? I'm here at J3455 AS Rock. Had intel first added because of easier way to change Mac address (ethtools) but had to use the NIC for another project. I'm here at maxed out speeds on that RTL 8111GR NIC. <- Not true .... Not so maxed out indeed.. just verified with iPerf and it maxes about 75MB/s also more parallel tasks will be limited to about 75? Better to replace intel NIC? Quote Link to comment Share on other sites More sharing options...
hannibal1969 Posted February 22, 2017 Share #1940 Posted February 22, 2017 Well I did some tests. I have here several NICs. There is no significant difference between the onboard Realtec 81111GR, intel Gigabit CT desktop adapter and HP NC 110T. All of them fluctuate between 75 / 90MBs with iperf. The onboard performs even better then the HPNC110T. From windows or OSX i get transferspeeds of about 110MBs based on SMB3. Quite okay! (I use all my disks as individual drives so no raid, all of them are "basic"). So for me there is no reason for a no buy of the j3455 except from turbo boost which would be a nice bonus if it wwas working. I enabled my onboard nic again Quote Link to comment Share on other sites More sharing options...
Ziomalski Posted February 22, 2017 Share #1941 Posted February 22, 2017 So DSM 6.1 is out. Has anyone tested to see if this loader will work for it? I'm interested in the results. Cheers. Quote Link to comment Share on other sites More sharing options...
zardoz Posted February 22, 2017 Share #1942 Posted February 22, 2017 @Ziomalsky : I could upgrade an ESXI to 6.1 with no problem (download from Synology site). The underlying server is a Dell T130 (low end config). I never use XPEnology on a barebone computer... Quote Link to comment Share on other sites More sharing options...
MGD9000 Posted February 22, 2017 Share #1943 Posted February 22, 2017 That's funny, I did the same test on ESXI and it failed. Sent from my XT1565 using Tapatalk Quote Link to comment Share on other sites More sharing options...
fonix232 Posted February 23, 2017 Share #1944 Posted February 23, 2017 Any chance of having some extra drivers added? I'd need the Intel WiFi Link 5100/5300 drivers, even as a separate module would be nice! I believe the two use the same module, and possibly are even covered by the regular iwlwifi module if I'm not mistaken. Quote Link to comment Share on other sites More sharing options...
Ziomalski Posted February 23, 2017 Share #1945 Posted February 23, 2017 @Ziomalsky : I could upgrade an ESXI to 6.1 with no problem (download from Synology site). The underlying server is a Dell T130 (low end config). I never use XPEnology on a barebone computer... Thanks for the info. That is great news. I too run on ESXi (6.5 on r710 H200). Please post back if you run into any issues. Thanks again. Quote Link to comment Share on other sites More sharing options...
tttgggbbb2 Posted February 23, 2017 Share #1946 Posted February 23, 2017 @Ziomalsky : I could upgrade an ESXI to 6.1 with no problem (download from Synology site). The underlying server is a Dell T130 (low end config). I never use XPEnology on a barebone computer... Failed on VMware Workstation 12.0.1 After the 6.1 upgrade, the Web console say the harddisk is moved to DS3615xs and ask me to recover (loop) Both upgrade and new install failed in the same way Quote Link to comment Share on other sites More sharing options...
meimeiriver Posted February 23, 2017 Share #1947 Posted February 23, 2017 That's funny, I did the same test on ESXI and it failed. Sent from my XT1565 using Tapatalk What exactly failed? Don't want to go thru the same s*** again as last time. Quote Link to comment Share on other sites More sharing options...
meimeiriver Posted February 23, 2017 Share #1948 Posted February 23, 2017 "Due to infrastructure update, packages will need re-initialization after upgrading to DSM 6.1." And what the heck is that?! You will need to reinstall all your packages!? (Like SABNZB) Quote Link to comment Share on other sites More sharing options...
chrobiche Posted February 23, 2017 Share #1949 Posted February 23, 2017 @Ziomalsky : I could upgrade an ESXI to 6.1 with no problem (download from Synology site). The underlying server is a Dell T130 (low end config). I never use XPEnology on a barebone computer... Failed on VMware Workstation 12.0.1 After the 6.1 upgrade, the Web console say the harddisk is moved to DS3615xs and ask me to recover (loop) Both upgrade and new install failed in the same way I'm on an R710 with passthrough H200 running under ESXi 6.5, and i have the exact same issue. Quote Link to comment Share on other sites More sharing options...
Gex Posted February 23, 2017 Share #1950 Posted February 23, 2017 Well I did some tests. I have here several NICs. There is no significant difference between the onboard Realtec 81111GR, intel Gigabit CT desktop adapter and HP NC 110T. All of them fluctuate between 75 / 90MBs with iperf. The onboard performs even better then the HPNC110T. From windows or OSX i get transferspeeds of about 110MBs based on SMB3. Quite okay! (I use all my disks as individual drives so no raid, all of them are "basic"). So for me there is no reason for a no buy of the j3455 except from turbo boost which would be a nice bonus if it wwas working. I enabled my onboard nic again I am running DSM 6.0.2 on the ASRock J3455M (bare metal) and experienced some rather weird issues with the speed of the onboard Realtek RTL8111E chip. See the full details here: viewtopic.php?f=2&t=25026 After throwing in the Intel PCIe NIC and disabling the onboard Realtek chip, everything worked very smoothly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.