spiderben25 Posted January 22, 2017 Share #1851 Posted January 22, 2017 I just created a new boot drive with the latest loader, problem remains the same... EDIT : got it working! For anyone running baremetal and experiencing trouble getting an IP with update 9, try the "AMD" boot entry on the boot menu, even if you're not using AMD hardware. Quote Link to comment Share on other sites More sharing options...
solitsnake Posted January 22, 2017 Share #1852 Posted January 22, 2017 update my Asrock J1900 to lastest Update without an Problem. Just need an Reboot to get the Network running (Power reset Button at the Case) Quote Link to comment Share on other sites More sharing options...
freddan83 Posted January 23, 2017 Share #1853 Posted January 23, 2017 I just created a new boot drive with the latest loader, problem remains the same... EDIT : got it working! For anyone running baremetal and experiencing trouble getting an IP with update 9, try the "AMD" boot entry on the boot menu, even if you're not using AMD hardware. I also did this, worked for me too.. thanks! Im running bare metal on a N54l Quote Link to comment Share on other sites More sharing options...
kennyyyt Posted January 23, 2017 Share #1854 Posted January 23, 2017 Anyone have same problem about "Cannot power off via web/ssh" in the physical PC?? There is some information of my PC: CPU: G530 MB: H61 Chipset with 3SATAs port I used DSM 5.2 before, there is no problem when power off the NAS from WEB. When I upgrade to DSM6.0 or clean install DSM6.0, I try to power off NAS and it keeps still runningm,but stop all services included DSM web / ssh / etc. Is it the same problem abou ACPI config -power button like N54L, Gen8 ? Quote Link to comment Share on other sites More sharing options...
index Posted January 23, 2017 Share #1855 Posted January 23, 2017 I just created a new boot drive with the latest loader, problem remains the same... EDIT : got it working! For anyone running baremetal and experiencing trouble getting an IP with update 9, try the "AMD" boot entry on the boot menu, even if you're not using AMD hardware. I also did this, worked for me too.. thanks! Im running bare metal on a N54l I don't get it all how to entry "AMD" boot on the boot menu? Quote Link to comment Share on other sites More sharing options...
spiderben25 Posted January 23, 2017 Share #1856 Posted January 23, 2017 Press the down arrow (or any key) multiples times during the boot sequence in order to access jun's loader boot menu (if you don't press anything it will default to the standard boot), then you will have several choices : standard boot, reinstall, force install, amd boot (that's the one you want to try) and vm. Quote Link to comment Share on other sites More sharing options...
mazay Posted January 24, 2017 Share #1857 Posted January 24, 2017 Hi all! Thying change mac adress on my Asrock H110M-ITX with Intel I219V and get "no supported devices" with EEupdate 5.17. Some one have the same problem and solve it? Quote Link to comment Share on other sites More sharing options...
janostasik Posted January 25, 2017 Share #1858 Posted January 25, 2017 Guys, can you share, if anyone got, .PAT file DSM update 6 or 7 or 8? I need to reinstall it and dont want to use latest update 9 which is causing the troubles.... Thank you... Quote Link to comment Share on other sites More sharing options...
hotshots Posted January 25, 2017 Share #1859 Posted January 25, 2017 Why don't you pick it from the Synology FTP-Server, the *Pat-Files are originals... Quote Link to comment Share on other sites More sharing options...
s0nik Posted January 25, 2017 Share #1860 Posted January 25, 2017 I just created a new boot drive with the latest loader, problem remains the same... EDIT : got it working! For anyone running baremetal and experiencing trouble getting an IP with update 9, try the "AMD" boot entry on the boot menu, even if you're not using AMD hardware. I also did this, worked for me too.. thanks! Im running bare metal on a N54l Also worked for me on baremetal Gigabyte Brix N3150 (created new boot drive on same USB 2.0 stick, changed PID VID & serial to prior settings) thnx! Quote Link to comment Share on other sites More sharing options...
bchuter Posted January 25, 2017 Share #1861 Posted January 25, 2017 Guys, can you share, if anyone got, .PAT file DSM update 6 or 7 or 8? I need to reinstall it and dont want to use latest update 9 which is causing the troubles....Thank you... https://usdl.synology.com/download/DSM/ ... ck/8451-8/ Link to update 8 you can find all the previous updates there Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted January 26, 2017 Share #1862 Posted January 26, 2017 Guys, can you share, if anyone got, .PAT file DSM update 6 or 7 or 8? I need to reinstall it and dont want to use latest update 9 which is causing the troubles....Thank you... https://usdl.synology.com/download/DSM/ ... ck/8451-8/ Link to update 8 you can find all the previous updates there More precisely this one >>> https://usdl.synology.com/download/DSM/ ... 3615xs.pat Quote Link to comment Share on other sites More sharing options...
mrjay Posted January 26, 2017 Share #1863 Posted January 26, 2017 (edited) LE: Solved it Edited January 29, 2017 by Guest Quote Link to comment Share on other sites More sharing options...
Aziona Posted January 27, 2017 Share #1864 Posted January 27, 2017 (edited) Successfully updated my 8 disk Asrock C70M1-system but not without entering a valid serial/mac-pair, otherwise no IP. Btrfs was available and after making the conf-file change, also SHR was available. (see next post of Polanskiman) Accidentally my HP Proliant N54L updated itself from 8 to 9. It was still active but lost its IP. After restarting it worked again. Marvelous! I am so happy with Jun's loader! Edited February 4, 2017 by Guest Quote Link to comment Share on other sites More sharing options...
bchuter Posted January 27, 2017 Share #1865 Posted January 27, 2017 Successfully updated my 8 disk Asrock C70M1-system but not without entering a valid serial/mac-pair, otherwise no IP. Btrfs is available but not SHR. Anybody knows how to get btrfs in combination with SHR? Have you enabled SHR ? it is not enabled by default the 3615xs SSH with admin input your password elevate rights by doing: sudo -i input your password again you are now root edit the synoinfo.conf file with vi or nano if you have it installed. I prefer nano it's easier to use. You can install it through the community package center vi /etc.defaults/synoinfo.conf or nano /etc.defaults/synoinfo.conf comment out/delete supportraidgroup="yes" then add support_syno_hybrid_raid="yes" Save the file. You are done. Preferably reboot. If you don't know what I am talking about then you shouldn't be tinkering with system files. Quote Link to comment Share on other sites More sharing options...
Jason69 Posted January 27, 2017 Share #1866 Posted January 27, 2017 I'm using a J1900 motherboard. The 5.2 Xpenology works fine. But the Jun loader doesn't seems to load the network drivers. Does the 5.2 loader and Jun's Loader has the similar drivers ? Quote Link to comment Share on other sites More sharing options...
niedi74 Posted January 27, 2017 Share #1867 Posted January 27, 2017 I use a q1900m and everything works without an issue Gesendet von meinem SM-G900F mit Tapatalk Quote Link to comment Share on other sites More sharing options...
A.S._id Posted January 27, 2017 Share #1868 Posted January 27, 2017 Successfully updated my 8 disk Asrock C70M1-system but not without entering a valid serial/mac-pair, otherwise no IP. Btrfs is available but not SHR. Anybody knows how to get btrfs in combination with SHR? Support SHR ssh admin@172.16.200.129 sudo -s cd /etc.defaults sed -i '/^/s:supportraidgroup="yes":support_syno_hybrid_raid="yes":' synoinfo.conf reboot back by default ssh admin@172.16.200.129 sudo -s cd /etc.defaults sed -i '/^/s:support_syno_hybrid_raid="yes":supportraidgroup="yes":' synoinfo.conf reboot Quote Link to comment Share on other sites More sharing options...
Jason69 Posted January 28, 2017 Share #1869 Posted January 28, 2017 I use a q1900m and everything works without an issue Gesendet von meinem SM-G900F mit Tapatalk Thanks. I guess I should be more specific with the details. Anyway, I pretty much figure out it's a dual intel i211. Problem I couldn't figure why the Synology Assistant couldn't find the system with Jun or quickNick 6.0 loader but the xpenology 5.2 loader works fine. Quote Link to comment Share on other sites More sharing options...
techweenie Posted January 28, 2017 Share #1870 Posted January 28, 2017 For those of you who used the original ESXi OVF and updated to Update 9, I have a pretty easy method to fix it. 1. Download the 1.01 loader and unzip everything. 2. Enable SSH to your ESXi host if you haven't already. 3. Use WinSCP (or equivalent) to copy the synoboot.img and synoboot.vmdk files to the VM folder on ESXi. 4. Using vSphere Web Client, edit the VM configuration to remove the existing SATA disk, then add a new disk using the existing synoboot.vmdk. (if anyone knows an alternate method for those without vCenter, please share) 5. Set the controller type to SATA just like the original was. 6. If necessary, modify the boot order to match the new disk That's all I had to do to get mine working again. I did have to reset the static IP, but that's it. Quote Link to comment Share on other sites More sharing options...
extenue Posted January 28, 2017 Share #1871 Posted January 28, 2017 Hi there i run two XPen 6.0.2 Jun loader update 9 VMs on Proxmox without any problem , for one of them , i mounted synoboot.img then modified the config file to update both SN & MAC Address to avoid conflict : both VMs are seen as distinct with DS Assistant from a third VM However i met this issue : i log on first VM then as soon as i log on second VM then i am automatically logged of the first one and vice versa is someone else have same problem ? any ideas on how to solve this ? Thanks XT Quote Link to comment Share on other sites More sharing options...
kaku Posted January 29, 2017 Share #1872 Posted January 29, 2017 For me. BTFRS still doesnt work with SHR on baremetal. Volume Creation always crashes with 3 HDDs ( 1TB, 1TB, 2TB) Successfully updated my 8 disk Asrock C70M1-system but not without entering a valid serial/mac-pair, otherwise no IP. Btrfs is available but not SHR. Anybody knows how to get btrfs in combination with SHR? Support SHR ssh admin@172.16.200.129 sudo -s cd /etc.defaults sed -i '/^/s:supportraidgroup="yes":support_syno_hybrid_raid="yes":' synoinfo.conf reboot Quote Link to comment Share on other sites More sharing options...
Agent-Orange Posted January 29, 2017 Share #1873 Posted January 29, 2017 SAS3 Controller which need the megaraid_sas driver won't work this loader at the moment or? Quote Link to comment Share on other sites More sharing options...
javakias Posted January 30, 2017 Share #1874 Posted January 30, 2017 Does the 5.2 loader and Jun's Loader has the similar drivers ? No it doesn't. In fact, there are a lot less drivers in Jun's loader. Quicknick's loader (which is currently unavailable) is said to contain all the drivers the 5.2 version had. But unfortunately it's about two months now waiting for it without a proper release. Quote Link to comment Share on other sites More sharing options...
extenue Posted January 30, 2017 Share #1875 Posted January 30, 2017 Hi there i run two XPen 6.0.2 Jun loader update 9 VMs on Proxmox without any problem , for one of them , i mounted synoboot.img then modified the config file to update both SN & MAC Address to avoid conflict : both VMs are seen as distinct with DS Assistant from a third VM However i met this issue : i log on first VM then as soon as i log on second VM then i am automatically logged of the first one and vice versa is someone else have same problem ? any ideas on how to solve this ? Thanks XT EDIT : solved on using private browsing , so root cause should be cookie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.