komarto Posted January 18, 2017 Share #1776 Posted January 18, 2017 SSH Is working? Quote Link to comment Share on other sites More sharing options...
Kussler Posted January 18, 2017 Share #1777 Posted January 18, 2017 I also had to reboot once for my NAS to get an IP after I installed Update 9. Gave me quite a scare too, because I wasn't at home and connected remotely. Quote Link to comment Share on other sites More sharing options...
komarto Posted January 18, 2017 Share #1778 Posted January 18, 2017 does you NAS have a static IP or DHCP? Quote Link to comment Share on other sites More sharing options...
jjLDN Posted January 18, 2017 Share #1779 Posted January 18, 2017 I had similar issues on my HP gen8. After installing Update 9 the machine rebooted however, I couldn't see it in my network in any way, even Synology Assistant couldn't find it. So I had to reboot the unit manually, and after second reboot it booted properly and now working like a charm. Quote Link to comment Share on other sites More sharing options...
captainfred Posted January 18, 2017 Share #1780 Posted January 18, 2017 I had similar issues on my HP gen8. After installing Update 9 the machine rebooted however, I couldn't see it in my network in any way, even Synology Assistant couldn't find it. So I had to reboot the unit manually, and after second reboot it booted properly and now working like a charm. Are you running latest HP fw and do you have g1610t cpu? Any chance you could install virtualbox if you don't have it already to test that? I have standard gen8 but no way of testing it all on this loader with dsm6. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Salah Posted January 18, 2017 Share #1781 Posted January 18, 2017 (edited) Using Juns pre-packaged Esxi vmdk I have ran into an issue on Esxi 6.2 patched all the way. I cannot get past SataPortMap=4. When I try to add via grub SataPortMap=41 on boot with mount on the datastore drive 5 Sata 1:0 in Esxi the machine goes right into migrate mode every time. Is another setting needing to be changed? On another note update 9 just went on. Cant find synology after update. Static, had to force boot web services did show page but syno assistant cant see SCRATCH ALL THAT! I wan using jun 1.0 vmdk. no wonder I couldnt get it going. after loading correct boot 9 went on fine Edited January 18, 2017 by Guest Quote Link to comment Share on other sites More sharing options...
waspsoton Posted January 18, 2017 Share #1782 Posted January 18, 2017 Anyone done update 9 Quote Link to comment Share on other sites More sharing options...
bchuter Posted January 18, 2017 Share #1783 Posted January 18, 2017 SSH Is working? Its working on my Baremetal install with update 9 I can SSH in on my user account as well as "root" (HP Gen8 G1610T) Quote Link to comment Share on other sites More sharing options...
boOmLa Posted January 18, 2017 Share #1784 Posted January 18, 2017 Anyone done update 9 LOL are you serious? If you read the last 20 posts just before your is all about update 9 mate Quote Link to comment Share on other sites More sharing options...
cralhr Posted January 18, 2017 Share #1785 Posted January 18, 2017 I just installed brand new and updated to 9 immediately without major issues. I'm building from scratch though, so I haven't really burned it in yet. The only thing I'm dealing with is the CMOS reset issue. It looks like everything else in the Bios is untouched, but the Date/Time is corrupted on boot. It means that I have to hit "F1" every time the server boots up from a shutdown or reboot and enable the cloud time sync feature. Not great, but not the worst. Just means I need to disable automatic DSM updates (planned on that anyway) and make sure I have a keyboard near the box for when I want to reboot. MB - ASROCK Rack C236 WSI Bios - American Megatrends UEFI setup Quote Link to comment Share on other sites More sharing options...
bchuter Posted January 18, 2017 Share #1786 Posted January 18, 2017 does you NAS have a static IP or DHCP? I have both my baremetal and VM installs set to get IP via DHCP (although i have statically mapped the IP to MAC in my DHCP server "Mikrotik Router") So it seems people with both static and DHCP have successfully upgrade to update 9 Although it seems most have had to hard boot the system to get it going again after the update. Quote Link to comment Share on other sites More sharing options...
gazzaman2k Posted January 18, 2017 Share #1787 Posted January 18, 2017 seems to have broken my hp n40l doing the update 9, i was on static IP too, now after numerous hard resets it cant be found on the network Quote Link to comment Share on other sites More sharing options...
Salah Posted January 18, 2017 Share #1788 Posted January 18, 2017 It had Btrfs update I noticed that on mine the drives seemed to be doing raid scrubbing after update. But mine was fresh loaded so I just started to reload with 9 from scratch. Quote Link to comment Share on other sites More sharing options...
gazzaman2k Posted January 18, 2017 Share #1789 Posted January 18, 2017 ignor above after putting the monitor and keyboard back onto the nas and re selecting the boot option in juns it decided to work now working on update 9 Quote Link to comment Share on other sites More sharing options...
dutchnas Posted January 18, 2017 Share #1790 Posted January 18, 2017 I'm using an HP N40L and using the same boot loader but after updating to update 9 the server won't responding anymore. Did an hard reset and im stuck at the following screen. How can i fix this? early console in decompress_kernel decompressing Linux... Parsing ELF... Parsing ELF Overlay... done. Booting the kernel. Quote Link to comment Share on other sites More sharing options...
jarugut Posted January 18, 2017 Share #1791 Posted January 18, 2017 HP N54L BareMetal 6.0.2 update 9 updated succesfully. Note: the same of bchuter colleague, in the first reboot the NAS lost the connectivity. After forced reboot the NAS recovered the connectivity and it's working fine with the update 9. Quote Link to comment Share on other sites More sharing options...
Hostilian Posted January 18, 2017 Share #1792 Posted January 18, 2017 Update 9 works fine on my Synology 216j (I always do this before I do my custom NAS). Also worked fine on my custom NAS (4th Gen i3). It did take a bit longer to come back up after the reboot (maybe a few minutes) but come back it did.. Just sit back and chill.. Make sure you have a static IP address (and not a reserved, static one dished out by DHCP - just because you can).. #H Quote Link to comment Share on other sites More sharing options...
dutchnas Posted January 18, 2017 Share #1793 Posted January 18, 2017 I'm using an HP N40L and using the same boot loader but after updating to update 9 the server won't responding anymore. Did an hard reset and im stuck at the following screen. How can i fix this? early console in decompress_kernel decompressing Linux... Parsing ELF... Parsing ELF Overlay... done. Booting the kernel. After more than an hour waiting there's no progress and synology assistant can't find the NAS anymore even when i've my laptop connected directly to the NAS. The NAS has an static IP even from the router with it's MAC address. Does somebody have some tips for me? Quote Link to comment Share on other sites More sharing options...
amareto Posted January 18, 2017 Share #1794 Posted January 18, 2017 I'm in the same boat. Waiting. According to vmware tools it has the 172.17.0.1 IP but ping, telnet, ssh or http doesn't work. Quote Link to comment Share on other sites More sharing options...
freddan83 Posted January 18, 2017 Share #1795 Posted January 18, 2017 I'm using an HP N40L and using the same boot loader but after updating to update 9 the server won't responding anymore. Did an hard reset and im stuck at the following screen. How can i fix this? early console in decompress_kernel decompressing Linux... Parsing ELF... Parsing ELF Overlay... done. Booting the kernel. After more than an hour waiting there's no progress and synology assistant can't find the NAS anymore even when i've my laptop connected directly to the NAS. The NAS has an static IP even from the router with it's MAC address. Does somebody have some tips for me? I dont have mine connected to a screen.. isnt it possible to alt+f2 a terminal, login as your user.. sudo -i and then ifconfig something up? Quote Link to comment Share on other sites More sharing options...
Xeno Posted January 18, 2017 Share #1796 Posted January 18, 2017 Update 9 worked smoothly Bearmetal install on X10SLH-F with LSI9211 -8i Firmware P20 IT mode. Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted January 18, 2017 Share #1797 Posted January 18, 2017 Update 9 worked, but needed hard reboot. Baremetal, x9srl-f, lsi 9300-16i, Quote Link to comment Share on other sites More sharing options...
jjLDN Posted January 18, 2017 Share #1798 Posted January 18, 2017 I had similar issues on my HP gen8. After installing Update 9 the machine rebooted however, I couldn't see it in my network in any way, even Synology Assistant couldn't find it. So I had to reboot the unit manually, and after second reboot it booted properly and now working like a charm. Are you running latest HP fw and do you have g1610t cpu? No, because I didn't register as a customer in time and HP changed the way, the updates are available to registered customers only, the latest fw I have is from Service Pack from July 2015. Yes, I have g1610t Any chance you could install virtualbox if you don't have it already to test that? I don't really need a vm as my HP is a kinda testbed for me. I have standard gen8 but no way of testing it all on this loader with dsm6. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
jjLDN Posted January 18, 2017 Share #1799 Posted January 18, 2017 I had similar issues on my HP gen8. After installing Update 9 the machine rebooted however, I couldn't see it in my network in any way, even Synology Assistant couldn't find it. So I had to reboot the unit manually, and after second reboot it booted properly and now working like a charm. Are you running latest HP fw and do you have g1610t cpu? No, because I didn't register as a customer in time and HP changed the way, the updates are available to registered customers only, the latest fw I have is from Service Pack from July 2015. Yes, I have g1610t Any chance you could install virtualbox if you don't have it already to test that? I don't really need a vm as my HP is a kinda testbed for me. I have standard gen8 but no way of testing it all on this loader with dsm6. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
dutchnas Posted January 19, 2017 Share #1800 Posted January 19, 2017 I'm using an HP N40L and using the same boot loader but after updating to update 9 the server won't responding anymore. Did an hard reset and im stuck at the following screen. How can i fix this? early console in decompress_kernel decompressing Linux... Parsing ELF... Parsing ELF Overlay... done. Booting the kernel. After more than an hour waiting there's no progress and synology assistant can't find the NAS anymore even when i've my laptop connected directly to the NAS. The NAS has an static IP even from the router with it's MAC address. Does somebody have some tips for me? I dont have mine connected to a screen.. isnt it possible to alt+f2 a terminal, login as your user.. sudo -i and then ifconfig something up? Maybe if the boot continues but it's stuck at booting the kernel message and no options to open an terminal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.