andykomala7 Posted January 11, 2017 Share #1726 Posted January 11, 2017 I got a DSM (6.0.2-8451 Update 7) reboot when set MTU to 9000 for ESXi vmxnet3. Has anyone faced with the same issue? Hi Hunterok, I am having the same problem, everytime I set MTU to 9000, the server rebooted. It's seems no solution yet. Quote Link to comment Share on other sites More sharing options...
weberio Posted January 11, 2017 Share #1727 Posted January 11, 2017 [spoiler=Version: 6.0.2-8451.8 (2017/01/11)]Important Note 1. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly. 2. This update will restart your Synology NAS. Fixed Issues 1. Enhanced SHA stability by optimizing CPU usage priority on the running process. 2. Enhanced the stability of a Btrfs volume with SSD cache. 3. IPv6 is now supported by ICMP rule in Firewall. 4. Fixed a security vulnerability regarding PHPMailer (CVE-2016-10033,CVE-2016-10045 )。 5. Fixed a security vulnerability regarding Linux Kernel (CVE-2016-7117). 6. Fixed an issue where VPN server might restart unexpectedly. http://download.synology.com/download/DSM/criticalupdate/update_pack/8451-8/ Regards.- Quote Link to comment Share on other sites More sharing options...
komarto Posted January 11, 2017 Share #1728 Posted January 11, 2017 Did anyone tried the new patch? Quote Link to comment Share on other sites More sharing options...
gazzaman2k Posted January 11, 2017 Share #1729 Posted January 11, 2017 just updated my hp 40 server, it didnt reset once updating but i power cycled it after the 10 min counter ended and then it worked now on update 8 Quote Link to comment Share on other sites More sharing options...
jjLDN Posted January 11, 2017 Share #1730 Posted January 11, 2017 Just updated with Update 8 with no issues at all, Server rebooted as supposed to and then it took exactly 10 min for finishing the update, but all ok. Quote Link to comment Share on other sites More sharing options...
Xeno Posted January 11, 2017 Share #1731 Posted January 11, 2017 I was wondering if anyone had luck with LSI 9211 8i? I can't make it work on the bearmetal install. The motherboard i'm using is https://www.supermicro.com/products/mot ... 0SLH-F.cfm and in order to get Intel i210 nic's to work I had reverse to loading of ramdisk.lzma in grub.cfg, but can't get the 9211 to work, no hard disk detected. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
jensmander Posted January 12, 2017 Share #1732 Posted January 12, 2017 Morning! I own an Acer Aspire EasyStore H340 with 4 HDDs. Every time I try to boot Jun's loader V1.01 the web assistant states "We've encountered an error with your hard disk (7)..." What I already tried: - flashed the internal SMI USB drive with a pre-modified image in which all relevant settings like VID, PID, serial no. and MAC had been modified according to the SMI - tried an external USB stick - tried different values for SataPortMap (1, 4, 41, etc.) with no luck - used force install in the loader menu - excluded everything except the SMI USB or USB stick from the boot menu - deleted all partitions from the internal HDDs Is there anybody who got this working on the H340? Thx! Quote Link to comment Share on other sites More sharing options...
tuonoazzurro Posted January 12, 2017 Share #1733 Posted January 12, 2017 Update 8 failed for me. The machine rebooted and say"grub error". Reflashed the USB Stick, the loader start but can't see nas from synology assistant. Did it on a test machine, so i have formatted the disks and reinstalled from scratch Quote Link to comment Share on other sites More sharing options...
captainfred Posted January 12, 2017 Share #1734 Posted January 12, 2017 Is it possible to install this in a VirtualBox VM running on my baremetal Gen8 Xpenology 5.2 ? Just for testing of course. Thanks Quote Link to comment Share on other sites More sharing options...
marigo Posted January 12, 2017 Share #1735 Posted January 12, 2017 Ola Marigo Can you expand a little bit please the details of your VM ? i have hard time trying to achieve a Xpen VM in proxmox , i did what you said but it does not work , i can boot the VM , i choosed the last entry then i can see "booting the kernel." then nothing else , i expect to see more (i already run Xpen on BareMetal and on ESX) , i have another VM (NAT mode) and i can't find anything wth Synology Assistant Any help regarding Xpen on Proxmox would be really much appreciated Thanks XT I choose the first option to boot the image. (synoboot.img) Are you using the correct *.img? It's about 50MB. "booting the kernel" is all I see too. Did you set the virtual NIC to "E1000"? Do you see that your DHCP server assinged an IP address to your VM? It should work with these settings I provided. Synology assistent should be in the same broadcast domain to search for "diskstation's" But I guess you already knew this. Quote Link to comment Share on other sites More sharing options...
gits68 Posted January 13, 2017 Share #1736 Posted January 13, 2017 I got a DSM (6.0.2-8451 Update 7) reboot when set MTU to 9000 for ESXi vmxnet3. Has anyone faced with the same issue? Hi Hunterok, I am having the same problem, everytime I set MTU to 9000, the server rebooted. It's seems no solution yet. subsidiary question, have you enabled MTU 9000 at the vswitch level ? [root@esxi:~] esxcli network vswitch standard list vSwitch0 Name: vSwitch0 Class: etherswitch Num Ports: 1536 Used Ports: 11 Configured Ports: 128 MTU: 1500 CDP Status: listen Beacon Enabled: false Beacon Interval: 1 Beacon Threshold: 3 Beacon Required By: Uplinks: vmnic1, vmnic0 Portgroups: VM Network, Management Network https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1007654 PS : I'am not using jumbo frames. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted January 13, 2017 Share #1737 Posted January 13, 2017 Update 8 on a VirtualBox went through. For some reason it did not reboot after the update. I had to hard reset it. Quote Link to comment Share on other sites More sharing options...
aleksey_z Posted January 13, 2017 Share #1738 Posted January 13, 2017 (edited) Hi all. Has anyone good work motherboard with integrated Realtek RTL8111H? In my signature server on P8Z68VLX with integrated Realtek RTL8111E it works great. ASUS H110 will also work well Realtek RTL8111H? For example like this: ASUS H110M-CS/C/SI But I do not see in the list of compatible RTL8111H. Thanks. P.S. Or is it better to consider such variants: MSI H110M ECO or AsRock H110M-ITX - they are both with Intel I219V ? Edited January 13, 2017 by Guest Quote Link to comment Share on other sites More sharing options...
Gex Posted January 13, 2017 Share #1739 Posted January 13, 2017 I was wondering if anyone had luck with LSI 9211 8i? I can't make it work on the bearmetal install. The motherboard i'm using is https://www.supermicro.com/products/mot ... 0SLH-F.cfm and in order to get Intel i210 nic's to work I had reverse to loading of ramdisk.lzma in grub.cfg, but can't get the 9211 to work, no hard disk detected. Any help would be greatly appreciated. I have been able to install baremetal with an IBM M1015 crossflashed to LSI 9211 8i (IT-Mode) without any issues. Mainboard ASRock J3455M. Quote Link to comment Share on other sites More sharing options...
withwolf1987 Posted January 13, 2017 Share #1740 Posted January 13, 2017 Update 8 on Baremetal without a problem. Quote Link to comment Share on other sites More sharing options...
Xeno Posted January 13, 2017 Share #1741 Posted January 13, 2017 I was wondering if anyone had luck with LSI 9211 8i? I can't make it work on the bearmetal install. The motherboard i'm using is https://www.supermicro.com/products/mot ... 0SLH-F.cfm and in order to get Intel i210 nic's to work I had reverse to loading of ramdisk.lzma in grub.cfg, but can't get the 9211 to work, no hard disk detected. Any help would be greatly appreciated. I have been able to install baremetal with an IBM M1015 crossflashed to LSI 9211 8i (IT-Mode) without any issues. Mainboard ASRock J3455M. That board has Realtek RTL8111E nic did you have to edit grub.cfg for it to work? What ramdisk.lzma are you using? What's the firmware version on your LSI card? My card is flashed to P20 IT mode. Quote Link to comment Share on other sites More sharing options...
pigr8 Posted January 13, 2017 Share #1742 Posted January 13, 2017 updated on a gen8 baremetal, everything went smooth. Quote Link to comment Share on other sites More sharing options...
error403 Posted January 14, 2017 Share #1743 Posted January 14, 2017 Update keeps failing (ESXi, Jun) due to "corrupt file". Already tried sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 mv /autoupd@te.info1 /autoupd@te.info with no success. Any ideas? Quote Link to comment Share on other sites More sharing options...
boOmLa Posted January 14, 2017 Share #1744 Posted January 14, 2017 updated on a gen8 baremetal, everything went smooth. Here too, updated my Lenovo M700 baremetal to update 8 with no prob... Quote Link to comment Share on other sites More sharing options...
Elpee Posted January 14, 2017 Share #1745 Posted January 14, 2017 Another update 8 successful with Jun loader in less then 1 min on Bare metal. Until Quicknick releases his new loader and we will have to test it, currently Jun loader is the best for bare metal nases. Quote Link to comment Share on other sites More sharing options...
one.nine Posted January 14, 2017 Share #1746 Posted January 14, 2017 Morning! I own an Acer Aspire EasyStore H340 with 4 HDDs. Every time I try to boot Jun's loader V1.01 the web assistant states "We've encountered an error with your hard disk (7)..." What I already tried: - flashed the internal SMI USB drive with a pre-modified image in which all relevant settings like VID, PID, serial no. and MAC had been modified according to the SMI - tried an external USB stick - tried different values for SataPortMap (1, 4, 41, etc.) with no luck - used force install in the loader menu - excluded everything except the SMI USB or USB stick from the boot menu - deleted all partitions from the internal HDDs Is there anybody who got this working on the H340? Thx! Same system - same issue - someone on here mentioned using Synology Assistant to install the image, instead of the web assistant - and it worked! Hope it works for you as well. Quote Link to comment Share on other sites More sharing options...
jensmander Posted January 15, 2017 Share #1747 Posted January 15, 2017 Hope it works for you as well. Made my day! Thx a lot! Quote Link to comment Share on other sites More sharing options...
captainfred Posted January 15, 2017 Share #1748 Posted January 15, 2017 Wondered if someone could help me. I'm trying to get this going in VirtualBox. I've imported it using the ovf file which is what I used for VMware Workstation and that works fine. In VirtualBox it doesn't come up in the console with booting the kernel bit, so I assume it's getting stuck there? I've tried all kinds of different settings, different NICs, different CPU/storage options etc but still the same. And tried the different boot options when the loader starts, including the VMware option. It's definitely not even connecting to the network. Any ideas? Thanks Virtualbox: VMware Workstation: Quote Link to comment Share on other sites More sharing options...
Dreadnought Posted January 15, 2017 Share #1749 Posted January 15, 2017 Morning! I own an Acer Aspire EasyStore H340 with 4 HDDs. Every time I try to boot Jun's loader V1.01 the web assistant states "We've encountered an error with your hard disk (7)..." What I already tried: - flashed the internal SMI USB drive with a pre-modified image in which all relevant settings like VID, PID, serial no. and MAC had been modified according to the SMI - tried an external USB stick - tried different values for SataPortMap (1, 4, 41, etc.) with no luck - used force install in the loader menu - excluded everything except the SMI USB or USB stick from the boot menu - deleted all partitions from the internal HDDs Is there anybody who got this working on the H340? Thx! Same system - same issue - someone on here mentioned using Synology Assistant to install the image, instead of the web assistant - and it worked! Hope it works for you as well. Do you find a workaround for the bootloop bug? Everytime I want to shutdown my H340 it will start again. Quote Link to comment Share on other sites More sharing options...
jensmander Posted January 16, 2017 Share #1750 Posted January 16, 2017 Do you find a workaround for the bootloop bug?Everytime I want to shutdown my H340 it will start again. I installed it on 2 different H340 and they shut down normal. Both systems have BIOS P03 installed and the only thing I changed within the BIOS was to exclude everything from the boot menu except the SMI USB. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.