xtiang7c0 Posted November 26, 2016 Share #1451 Posted November 26, 2016 from this link: viewtopic.php?f=2&t=20216&start=1430#p79971 Sorry can only quote max. three times. Absolutely wrong. There is no need to flash anything. Simply use your NIC MAC address. Shouldn´t there always be the pair of SN with the calculated MAC? Or do you mean I can just put a generated serial number and the hardware MAC from my baremteal system in the grub.cfg and it works? Thanks No there shouldn't unless the purpose is to fradulently use Synology's services such as Quickconnect. Using a generated s/n and your network card MAC address is enough for DSM to function. Thanks a lot! Then I change it, as I wouldn´t use the service anyway. Quote Link to comment Share on other sites More sharing options...
Qoo Posted November 26, 2016 Share #1452 Posted November 26, 2016 I have updated my dsm to dsm 6.0.2-8451 update 3 over the internet, now i cant connect to the internet, does anyone have the same issue? same for me, my dns and gateway got removed. After setting it new, everything worked again. Quote Link to comment Share on other sites More sharing options...
michiel.686 Posted November 26, 2016 Share #1453 Posted November 26, 2016 Did somebody already try Jun's Loader / DSM 6.0.2 on the new Apollo Lake boards (J3455/J4205)? Several times I've been reading "it should work" in this discussion, but it seems to me nobody actually tried? A few pages back somebody mentioned it’s not booting and I’ve been reading about problems using Ubuntu on Apollo Lake boards. Just want to have a confirmation before making a mistake in buying, I prefer to have a WORKING J3710 board over a black screen Apollo Lake Thanks! Quote Link to comment Share on other sites More sharing options...
Aigor Posted November 26, 2016 Share #1454 Posted November 26, 2016 Another Update on Baremetal from 5.2 to 6.02 everything seems works ok Quote Link to comment Share on other sites More sharing options...
lobak Posted November 26, 2016 Share #1455 Posted November 26, 2016 me too just for a note: HA cluster works without problems - tested on HP Microserver Gen7 and Gen8 great!!! Quote Link to comment Share on other sites More sharing options...
aigors Posted November 26, 2016 Share #1456 Posted November 26, 2016 Next on my todo list is try to add fibre channel support Inviato dal mio PLK-L01 utilizzando Tapatalk Quote Link to comment Share on other sites More sharing options...
neonflx Posted November 27, 2016 Share #1457 Posted November 27, 2016 need help getting a quad nic card working, I have a Dell 0YT674, which uses intel 82575 drivers, it is recognized but can't pull an ip address, the same with my onboard quad i210, i can see them on the info center under network but can't pull an ip, i'm also using a single intel nic which works ok. i tried adding mac1, mac2, mac3, etc. or none at all, and still can't pull an ip any suggestions? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted November 27, 2016 Share #1458 Posted November 27, 2016 (edited) need help getting a quad nic card working, I have a Dell 0YT674, which uses intel 82575 drivers, it is recognized but can't pull an ip address, the same with my onboard quad i210, i can see them on the info center under network but can't pull an ip, i'm also using a single intel nic which works ok. i tried adding mac1, mac2, mac3, etc. or none at all, and still can't pull an ip any suggestions? If I'm not mistaken your NIC's haven't had their drivers compiled against DSM 6.0.2 source code and included in the loader. At least I am sure for the i210. They would need to be compiled and added to the loader first. If you know how to compile external drivers then you can do that else you will have to wait until someone does it. Have a look at the end of the OP of the tutorial I made >>> viewtopic.php?t=22100#p76338 I have gathered all drivers normally included in the loader. EDIT: I was wrong. i210 is included. The drivers source is igb-5.3.5.4 and are compiled and contained in the extra.lzma ramdisk. Edited January 18, 2017 by Guest Quote Link to comment Share on other sites More sharing options...
Lucan Posted November 27, 2016 Share #1459 Posted November 27, 2016 Didnt work on my amd cpu based system. Migration itself worked, but nas wasnt reachable after a few minutes. Switching it off and on again worked a few minutes. After that it stopped working. Hat to downgrade, but because i wasnt able to connect it at all (even ssh) i had to reinstall dsm and configurate everything new. Doesnt seemto be stable at all. Quote Link to comment Share on other sites More sharing options...
neuro1 Posted November 27, 2016 Share #1460 Posted November 27, 2016 Also updated my dsm 5.2 (Esxi) to 6.0 works fine with some issues: 1. My photo station icon link redirects to the dsm webpage, the port goes to 5000 instead of 80/443. Can someone provide a fix for this? 2. Cloud station not able to connect via synology cloud station application. Has anyone else had these issue? Thanks and great work! Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted November 27, 2016 Share #1461 Posted November 27, 2016 Didnt work on my amd cpu based system. Migration itself worked, but nas wasnt reachable after a few minutes. Switching it off and on again worked a few minutes. After that it stopped working. Hat to downgrade, but because i wasnt able to connect it at all (even ssh) i had to reinstall dsm and configurate everything new. Doesnt seemto be stable at all. It is for the majority. Perhaps some drivers needed for your hardware are not yet included. Keep in mind though that this loader was designed with DSM 6.0.2 Beta and I wouldn't recommend using this loader with production machines unless prior testing has been concluded succesfully. Quote Link to comment Share on other sites More sharing options...
michiel.686 Posted November 27, 2016 Share #1462 Posted November 27, 2016 can support for AsRock J3455-ITX?i with use the v1.1 loader boot,and the pc mon stop at the cursor, can not display the Jun's menu. help~ Thx~ Try changing BIOS settings: Activate CSM and other settings to UEFI only. Disable secure boot. Let me know if this works. Quote Link to comment Share on other sites More sharing options...
SergeS Posted November 27, 2016 Share #1463 Posted November 27, 2016 I have hp n54l (with extra memory and net-card), xpenology, DSM 5.2, which does scheduled synology-style backups to original synology ds410, also with DSM 5.2. Planning to upgrade xpenology on n54l to dsm 6, but dsm on ds410 is not updatable anymore, 5.2 is the last. Will I be able to perform backup from DSM 6 to DSM 5.2? There are some rumors it won't be possible anymore. And another question - I have APS BACK-UPS ES 725, connected to n54l by usb. I''ve seen some people have problems with usb on xpenology (dsm 6), so will it support my ups after upgrade? Quote Link to comment Share on other sites More sharing options...
Eduardo Posted November 27, 2016 Share #1464 Posted November 27, 2016 ...And another question - I have APS BACK-UPS ES 725, connected to n54l by usb. I''ve seen some people have problems with usb on xpenology (dsm 6), so will it support my ups after upgrade? No. Not yet. Quote Link to comment Share on other sites More sharing options...
mpuff Posted November 27, 2016 Share #1465 Posted November 27, 2016 i have manually updated dms to 6.0.2-8451 update 4, that solved the problem for me. I have updated my dsm to dsm 6.0.2-8451 update 3 over the internet, now i cant connect to the internet, does anyone have the same issue? same for me, my dns and gateway got removed. After setting it new, everything worked again. Quote Link to comment Share on other sites More sharing options...
SergeS Posted November 27, 2016 Share #1466 Posted November 27, 2016 ...And another question - I have APS BACK-UPS ES 725, connected to n54l by usb. I''ve seen some people have problems with usb on xpenology (dsm 6), so will it support my ups after upgrade? No. Not yet. Thank you Quote Link to comment Share on other sites More sharing options...
abced Posted November 27, 2016 Share #1467 Posted November 27, 2016 I have hp n54l (with extra memory and net-card), xpenology, DSM 5.2, which does scheduled synology-style backups to original synology ds410, also with DSM 5.2. Planning to upgrade xpenology on n54l to dsm 6, but dsm on ds410 is not updatable anymore, 5.2 is the last. Will I be able to perform backup from DSM 6 to DSM 5.2? There are some rumors it won't be possible anymore. You will use legacy option in HyperBackup. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted November 27, 2016 Share #1468 Posted November 27, 2016 (edited) I have hp n54l (with extra memory and net-card), xpenology, DSM 5.2, which does scheduled synology-style backups to original synology ds410, also with DSM 5.2. Planning to upgrade xpenology on n54l to dsm 6, but dsm on ds410 is not updatable anymore, 5.2 is the last. Will I be able to perform backup from DSM 6 to DSM 5.2? There are some rumors it won't be possible anymore. And another question - I have APS BACK-UPS ES 725, connected to n54l by usb. I''ve seen some people have problems with usb on xpenology (dsm 6), so will it support my ups after upgrade? In your situation I would personally not upgrade just yet. Your setup seems delicate enough and the current loader is still in its enfancy. Wait and see how things go, but more specifically I would suggest you to get more comprehensive info on intercompatibility between DSM 5.2 and DSM 6.0 on Synology forums. Edited November 28, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
loderunner Posted November 28, 2016 Share #1469 Posted November 28, 2016 new loader helped correctly to insall DSM 6.0.2. add one else hdd and now can't boot))) detach this hdd - can't boot. first boot option not working. reinstall or force install - worked. flash loader to usb again - no effect. i have no ideas any more. syno invisible for synology assistant then i boot 1st line of grub Quote Link to comment Share on other sites More sharing options...
Mentat Posted November 28, 2016 Share #1470 Posted November 28, 2016 I have hp n54l (with extra memory and net-card), xpenology, DSM 5.2, which does scheduled synology-style backups to original synology ds410, also with DSM 5.2. Planning to upgrade xpenology on n54l to dsm 6, but dsm on ds410 is not updatable anymore, 5.2 is the last. Will I be able to perform backup from DSM 6 to DSM 5.2? There are some rumors it won't be possible anymore. And another question - I have APS BACK-UPS ES 725, connected to n54l by usb. I''ve seen some people have problems with usb on xpenology (dsm 6), so will it support my ups after upgrade? 1. I make backup from DSM 5.2 ro DSM 6 2. My APC UPS works with both DSM Quote Link to comment Share on other sites More sharing options...
fswcr1 Posted November 28, 2016 Share #1471 Posted November 28, 2016 I wanted to post some pictures but I get the error that this board has exceeded its quota for attachments. So my system sees all the disks in Storage Manager. The 8TB drive is initialized and in an unused state. When I go to create a volume, the "Create" is greyed out not letting me create a new volume and add the 8TB drive to the system. Otherwise, everything else works great! Your post count maybe too low to add images? Have you tried adding a disk group and then adding the volume after that? Anyone have this problem? The option to create new volume is greyed out. This is a drive that was a volume2 before with the DSM5.2. I could try formatting the drive in an external and then sticking it in the system but I would lose the data on it. Just wanted to find out if anyone else had this issue? I am sure there is a way to go in CLI and mount or change some setting so storage manager will see this. I figured out the problem. When upgrading from 5.2 to 6.0 and keeping the partition format in tact (ext4), I needed to modify the synoinfo.conf file. Edited /etc.defaults/synoinfo.conf Changed "supportraidgroup=yes" to "support_syno_hybrid_raid=yes". This allowed me to create a new volume with my 8TB drive. Quote Link to comment Share on other sites More sharing options...
liruisheng Posted November 29, 2016 Share #1472 Posted November 29, 2016 can support for AsRock J3455-ITX?i with use the v1.1 loader boot,and the pc mon stop at the cursor, can not display the Jun's menu. help~ Thx~ Try changing BIOS settings: Activate CSM and other settings to UEFI only. Disable secure boot. Let me know if this works. Oh!!!working!!! Thz!!! Quote Link to comment Share on other sites More sharing options...
bmwfreak8 Posted November 29, 2016 Share #1473 Posted November 29, 2016 I have the exact same problem. Booting on 5.2 works with no problems. I have a older HP Bios. I can't find a UEFI setting. what did you mean with CSM? Quote Link to comment Share on other sites More sharing options...
Redbeard Posted November 29, 2016 Share #1474 Posted November 29, 2016 Anyone running this DSM 6.0.2 on a HP Microserver Gen8 baremetal? Quote Link to comment Share on other sites More sharing options...
Aigor Posted November 29, 2016 Share #1475 Posted November 29, 2016 Anyone running this DSM 6.0.2 on a HP Microserver Gen8 baremetal? Me, it works flawless, recently i update from 5.x to 6.02 with a little bit problem, after reboot, my gen 8 lost default gateway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.