Jump to content
XPEnology Community

DSM 6.1.x Loader


jun

Recommended Posts

does anyone have a link to dsm 6.0 pat file?. looks like this is working... but i dont have a pat file.

 

Google is your friend >>> https://usdl.synology.com/download/DSM/ ... s_8451.pat

 

It's from Synology official servers.

 

yeah i ended up just getting the pat from syno. im testing it with 1 drive i dont want to take a gamble and fubar my main array. so all is a go with a mediasmart server :smile: sudo access working fine... now the fun of bouncing data back and forth. btrfs shr is working 1 disk :smile: using 8451 update 3 took a reboot after the update as once you update it needs that 2nd reboot otherwise it just sits there.

Link to comment
Share on other sites

I am on the same boat.

Coming from DSM5.2 where the Smargo reader worked perfectly (detected as /dev/ttyUSB0), now the device is not detected.

When I run 'dmesg' after plugging it in I don't even get a notification.

So I think it is not detected in any way.

 

The USB port seems to be fine.

When I connect a USB stick, I can access it.

 

Tips anyone?

 

First a thanks to the developers of this mighty fine bootloader. I'm using it on a baremetal N54L and all works great, even DVB-T! :smile:

 

The only thing I run into is the following. I have a Smargo Smartreader V2 for decrypting DVB-T channels. The device uses FTDI for Serial and is not recognized out of the box. So, I had to install the 'USBSerialDrivers DSM 6.0' package from Jadahl. Now the device is recognised but it won't instsall driver or map to /dev/(ttyUSBx).

 

This is what I see in my dmesg log:

 

[  241.750500] usbserial: USB Serial deregistering driver FTDI USB Serial Device
[  241.750531] usbcore: deregistering interface driver ftdi_sio
[  327.902940] usbcore: registered new interface driver ftdi_sio
[  327.902966] usbserial: USB Serial support registered for FTDI USB Serial Device
[  327.916916] usbcore: registered new interface driver ti_usb_3410_5052
[  327.916941] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[  327.916957] usbserial: USB Serial support registered for TI USB 5052 2 port adapter

 

Is the firmware (ti_3410.fw) present in the DSM 6.0 kernel? How to check?

Linux NAS 3.10.77 #8451 SMP Wed Aug 17 05:12:41 CST 2016 x86_64 GNU/Linux synology_bromolow_3615xs 

 

Has anyone a suggestion?

Link to comment
Share on other sites

look at my smargo info inside chroot:

oscam manualy compiled using smargo in libusb

instaled all dependencies and libusb-dev 1.0 i think.

 

root@nas:/usr/src/oscam-svn/Distribution# ./list_smargo-1.20-unstable_svn11279-x86_64-linux-gnu-libusb
libudev: udev_has_devtmpfs: name_to_handle_at on /dev: Function not implemented
Looking for smartreader compatible devices...
bus 002, device 005 : 0403:6001 Smartreader2 plus (type=SRv2, in_ep=02, out_ep=81; insert in oscam.server 'device = SRv2;Serial:CCCCCCCC')

 

dmesg after unplug it and plug it again:

 

[36342.567036] usb 2-1.4: USB disconnect, device number 4
[36344.801652] usb 2-1.4: new full-speed USB device number 5 using ehci-pci

 

again, if you guys are using oscam, dont use FTDI drivers, reconfigure your driver to use smartreader protocol, its alot beter

 

[reader]

protocol                      = smartreader
device                        = SRv2;Serial:CCCCCCCC
detect                        = cd

work 100%

Link to comment
Share on other sites

Okay, thanks for the feedback.

I will try to follow you instructions and modify the config.

But even without the changes, don't you think I should get some kind of notification when plugging it in (dmesg).

I am using a microserver by the way.

 

look at my smargo info inside chroot:

oscam manualy compiled using smargo in libusb

instaled all dependencies and libusb-dev 1.0 i think.

 

root@nas:/usr/src/oscam-svn/Distribution# ./list_smargo-1.20-unstable_svn11279-x86_64-linux-gnu-libusb
libudev: udev_has_devtmpfs: name_to_handle_at on /dev: Function not implemented
Looking for smartreader compatible devices...
bus 002, device 005 : 0403:6001 Smartreader2 plus (type=SRv2, in_ep=02, out_ep=81; insert in oscam.server 'device = SRv2;Serial:CCCCCCCC')

 

dmesg after unplug it and plug it again:

 

[36342.567036] usb 2-1.4: USB disconnect, device number 4
[36344.801652] usb 2-1.4: new full-speed USB device number 5 using ehci-pci

 

again, if you guys are using oscam, dont use FTDI drivers, reconfigure your driver to use smartreader protocol, its alot beter

 

[reader]

protocol                      = smartreader
device                        = SRv2;Serial:CCCCCCCC
detect                        = cd

work 100%

Link to comment
Share on other sites

Next update maybe change the timeout= parameter to default to 3 or 4 seconds. :cool: Should be plenty enough

Press up/down key before the menu is shown, the same way as you enter BIOS setup screen

 

Yes it's not a problem for me at all. I was simply conveying the message as I have seen a countless number of people missing the menu as it was too fast :smile:

Link to comment
Share on other sites

i try a update in my dell t20. the machine is booting but when i go to the page for migrate then there is only a text wich say hdd 5 and 6 have error and sata ports are disabled. i can´t click the button for migrate. What i´m doing wrong ? I set vid and pid in grub cfg also sataportmap to 4

Link to comment
Share on other sites

i try a update in my dell t20. the machine is booting but when i go to the page for migrate then there is only a text wich say hdd 5 and 6 have error and sata ports are disabled. i can´t click the button for migrate. What i´m doing wrong ? I set vid and pid in grub cfg also sataportmap to 4

Maybe there are more than one controllers on board?

You could try setting sataportmap to 44.

Link to comment
Share on other sites

i try a update in my dell t20. the machine is booting but when i go to the page for migrate then there is only a text wich say hdd 5 and 6 have error and sata ports are disabled. i can´t click the button for migrate. What i´m doing wrong ? I set vid and pid in grub cfg also sataportmap to 4

Maybe there are more than one controllers on board?

You could try setting sataportmap to 44.

 

Your sata controller is a C226

 

Datasheet : http://www.intel.com/content/dam/www/pu ... asheet.pdf

 

Only one controller for 6 sata HDD

 

Use : sataportmap=6

Link to comment
Share on other sites

i try a update in my dell t20. the machine is booting but when i go to the page for migrate then there is only a text wich say hdd 5 and 6 have error and sata ports are disabled. i can´t click the button for migrate. What i´m doing wrong ? I set vid and pid in grub cfg also sataportmap to 4

Maybe there are more than one controllers on board?

You could try setting sataportmap to 44.

 

Your sata controller is a C226

 

Datasheet : http://www.intel.com/content/dam/www/pu ... asheet.pdf

 

Only one controller for 6 sata HDD

 

Use : sataportmap=6

 

I try that but i still get the error that HDD 5,6 are damaged and sata ports are disabled ....

when i boot up with the old 5.2 everything is fine

Link to comment
Share on other sites

I worked it out (sort of).

After trying all your tips, the reader still did not work in any way.

Almost ready to throw it out of the window, I tried to insert an old USB 2 Hub between de HP microserver and smartreader.

Immediately, the reader started working, exactly as before on 5.2.

I tried to remove the hub and immediately it stopped working again. I also tried different BIOS settings regarding USB, bot none worked.

Lsusb only shows the device when connected through the hub.

So the only way to get the smargo working for now is to use the old (Sweex) USB 2.0 Hub. I am okay with that for now, but if possible I would like to connect the reader directly.

 

look at my smargo info inside chroot:

oscam manualy compiled using smargo in libusb

instaled all dependencies and libusb-dev 1.0 i think.

 

root@nas:/usr/src/oscam-svn/Distribution# ./list_smargo-1.20-unstable_svn11279-x86_64-linux-gnu-libusb
libudev: udev_has_devtmpfs: name_to_handle_at on /dev: Function not implemented
Looking for smartreader compatible devices...
bus 002, device 005 : 0403:6001 Smartreader2 plus (type=SRv2, in_ep=02, out_ep=81; insert in oscam.server 'device = SRv2;Serial:CCCCCCCC')

 

dmesg after unplug it and plug it again:

 

[36342.567036] usb 2-1.4: USB disconnect, device number 4
[36344.801652] usb 2-1.4: new full-speed USB device number 5 using ehci-pci

 

again, if you guys are using oscam, dont use FTDI drivers, reconfigure your driver to use smartreader protocol, its alot beter

 

[reader]

protocol                      = smartreader
device                        = SRv2;Serial:CCCCCCCC
detect                        = cd

work 100%

  • Like 1
Link to comment
Share on other sites

Is there a better way of hiding the boot drive on ESXI or should I still add rmmod=ata_piix to the list of parameters?

Edit: Doesn't seem to work. I've tried both ata_piix and rmmod=ata_piix as extra arguments

 

Did you ever manage to hide the boot drive?

Yes, I just converted the image to IDE and appended rrmod. Can't remember the details though, but I will check that once I get the time.

Link to comment
Share on other sites

maxrogers said:
Adding my voice to the 4 others that have commented in this thread who have Intel i210 network cards who cannot get this loader to activate our network cards. (

 

I am guessing the i210 drivers are not included in this loader...

 

Is there anyone that can add Intel i210 drivers for us? :grin:

you can try to load the extra.lzma first if this is working for the i210.

 

initrd $img/ramdisk.lzma $img/$extra_initrd

chg to

initrd $img/$extra_initrd $img/ramdisk.lzma

 

Link to comment
Share on other sites

Maybe there are more than one controllers on board?

You could try setting sataportmap to 44.

 

Your sata controller is a C226

 

Datasheet : http://www.intel.com/content/dam/www/pu ... asheet.pdf

 

Only one controller for 6 sata HDD

 

Use : sataportmap=6

 

I try that but i still get the error that HDD 5,6 are damaged and sata ports are disabled ....

when i boot up with the old 5.2 everything is fine

 

This is clearly mentioned in the OP. Try a force install.

Link to comment
Share on other sites

Hallo, is the driver for this chip integrated?

Realtek RTL8111GR

trying updating on my Asrock N3700 but i can't find it with Synology Assistant

Thanks

 

A little bit of searching and reading would have brought up you an answer.

 

Change log:

Added below kernel modules:

 

r8101: RTL8100E/RTL8101E/RTL8102E-GR/RTL8103E(L) RTL8102E(L)/RTL8101E/RTL8103T RTL8401/RTL8401P/RTL8105E RTL8402/RTL8106E/RTL8106EUS

r8168: RTL8111B/RTL8168B/RTL8111/RTL8168 RTL8111C/RTL8111CP/RTL8111D(L) RTL8168C/RTL8111DP/RTL8111E

r8168: RTL8168E/RTL8111F/RTL8411 RTL8111G/RTL8111GUS/RTL8411B(N) RTL8118AS

* Note: r8169 from Trantor archive doesn't work with my on-board Realtek RTL8111GR. So I kept the existing which is also much bigger.

 

e1000e: 82573L/82572EI/82571EB/82573E/82573V/82567/82574L/82566MM/82566MC

e1000e: 82566DM/82566DC/82563EB/82574IT/82583V/82579LM/82579V/82577LC/82577LM

e1000e: 82578DC/82578DM/Gigabit CT Desktop Adapter/PRO/1000 PT/PF/I217-LM/V/I218-V/LM/I219 LM/V

 

bnx2: Broadcom NetXtremeII BCM5706/BCM5708/5709/5716

bnx2x: Broadcom NetXtremeII 10Gb BCM57710/BCM57711/BCM57711E/BCM57712

tg3: Broadcom Tigon3 BCM5705/BCM5703/BCM5702/BCM5701/BCM5700/BCM5721/BCM5751/BCM5788/BCM5704/BCM5752/BCM5789

tg3 : BCM5723/BCM5761/BCM5787/BCM5755/BCM5722/BCM5754/BCM57781/BCM57785/BCM5718BCM57765/BCM57761

tg3: BCM5719/BCM5725/BCM5762/BCM5720/BCM57790/BCM57795/BCM57766/BCM57780

* Note: Existing modules updated with version from Trantor archive. I also added missing firmware files.

 

ax88179_178a : ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet

 

mpt2sas: LSI SAS 6Gb/s Host Adapters SAS2004, SAS2008, SAS2108, SAS2116, SAS2208, SAS2308 and SSS6200

* Note: It's already included in existing ramdisk but not loaded. By dmesg it's started correctly.

 

evdev, button: for acpid

Link to comment
Share on other sites

Quick note to mention that jun's 1.01 loader worked for me on an Intel SS4200-E bare metal with 4 disks as an upgrade from 5.2.

 

I did have issues with migration. I tried several times to install (and reinstall) under the migration path, and the DS just never came back up. So the fourth time I did a clean install and everything came up fine. Of course then I had to recreate more but I honestly don't do much with this server, mainly backup and Plex. Quickconnect didn't work as others have said.

 

Thanks for all the effort and help guys! I followed the tutorial in Polanskiman's tutorial thread, so thanks for that as well. FYI I'm on a Mac so the command to write the .img to the USB is

sudo dd if=/path/to/file.img of=/dev/rdiskN bs=1m

(not sure the bs=1m is needed but it worked)(rdiskN is the rdisk of your USB, reported by 'diskutil list', e.g. rdisk2)

Then I followed the instructions in the follow-up message about mkdir /Volumes/efi;sudo mount -t msdos /dev/disk2s1 /Volumes/efi

(assuming your USB's EFI partition is disk2s1 as reported by diskutil list) to edit the grub.cfg file and edited my vid, pid, sn, and mac. I did not add the SataMap. The loader/OS found my 4 sata disks without issue.

 

rsync works too. Thanks again. Anyone know if we can update to 6.0.2-8451 update 3?

Link to comment
Share on other sites

Um... could be a repeated question and answer but is there a tutorial to adding drivers r8101: RTL8100E/RTL8101E/RTL8102E-GR/RTL8103E(L) RTL8102E(L)/RTL8101E/RTL8103T RTL8401/RTL8401P/RTL8105E RTL8402/RTL8106E/RTL8106EUS as listed above... im new at this and would love to get it working at gigabit speeds and all would be great.. even if someone would be able to assist me with embeding in the driver??? hope for some help thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...