ilgrandetia Posted November 6, 2016 Share #1051 Posted November 6, 2016 Any chance you could make a XenServer image? The vm and esxi image doesn't work with Xen. I'm also interested into it...no chance to make it work in Xen Server 7? start the boot but no findable with find.synology.com or synology assistance... Quote Link to comment Share on other sites More sharing options...
ink0gnito Posted November 6, 2016 Share #1052 Posted November 6, 2016 Any chance you could make a XenServer image? The vm and esxi image doesn't work with Xen. I'm also interested into it...no chance to make it work in Xen Server 7? start the boot but no findable with find.synology.com or synology assistance... Same here with Proxmox/KVM. Quote Link to comment Share on other sites More sharing options...
trublu Posted November 6, 2016 Share #1053 Posted November 6, 2016 I will be providing updated loader with configuration tool to assist everyone modifying configurations from within xpenology so no one will have to modfy in boot cds or other methods. I will start a new thread on that this weekend. Stay tuned! Sent from my SM-N920T using Tapatalk How's this going? If you need testers, I'm game Quote Link to comment Share on other sites More sharing options...
WizP Posted November 6, 2016 Share #1054 Posted November 6, 2016 Ok for people using the KVM (i.e. proxmox, xeserver etc) I've made a compatible image for you. https://dl.dropboxusercontent.com/u/36438777/boot.rar Its a straight conversion from the original synoboot.img For anyone wanting to change the MAC, Serial etc. download OSFMount from here http://www.osforensics.com/tools/mount-disk-images.html Mount the image using OSFMount (Making sure to give read.write permissions) Open the drive, edit the grub.cfg as required Now find a copy of qemu-img and install it. You can run the following command line to convert the image to the KVM compatible qcow2 format qemu-img.exe convert -f raw -O qcow2 original.img output.img Now create a KVM virtual machine assign an IDE hardrive with the output.img file to boot and also add a 10GB+ SATA drive second. Make sure your network card type is set to Intel 1000e Boot you're VM and find it using the synology assistant (Download from synology) I have this working on the QNap NAS drive using their version of KVM (Virtualisation Station) Hope this helps!! Quote Link to comment Share on other sites More sharing options...
JMRR Posted November 6, 2016 Share #1055 Posted November 6, 2016 Just some ferdback, instaled on a i3, no vid or pid ou sn configured, everithing went well, works perfect. Just one question i need to compile tbs drivers to teste, where can i get the source you guys are using to compile modules?? Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
Ponury_Typ Posted November 6, 2016 Share #1056 Posted November 6, 2016 Ok for people using the KVM (i.e. proxmox, xeserver etc) I've made a compatible image for you. https://dl.dropboxusercontent.com/u/36438777/boot.rar Its a straight conversion from the original synoboot.img For anyone wanting to change the MAC, Serial etc. download OSFMount from here http://www.osforensics.com/tools/mount-disk-images.html Mount the image using OSFMount (Making sure to give read.write permissions) Open the drive, edit the grub.cfg as required Now find a copy of qemu-img and install it. You can run the following command line to convert the image to the KVM compatible qcow2 format qemu-img.exe convert -f raw -O qcow2 original.img output.img Now create a KVM virtual machine assign an IDE hardrive with the output.img file to boot and also add a 10GB+ SATA drive second. Make sure your network card type is set to Intel 1000e Boot you're VM and find it using the synology assistant (Download from synology) I have this working on the QNap NAS drive using their version of KVM (Virtualisation Station) Hope this helps!! Well, thing is that we can boot image (even orginal) under proxmox (KVM). Issue is that we cant find Syno on the network since driver for proxmox vlans (intel e1000 or virito) is missing from boot image. Solution is simple. We need boot image with proxmox intel e1000 or universal Virito lan driver. Quote Link to comment Share on other sites More sharing options...
xtiang7c0 Posted November 6, 2016 Share #1057 Posted November 6, 2016 Hi,thank you for your work, it's working perfectly I running DSM6 on KVM in the host unRAID, mouting NFS shares of my unraid server to DSM so I can use almost all the features that DSM have (except btrfs things) the only problem is the virtio (para-virtualitzed) drivers doesn't work, Could be possible to add this drivers? now i'm using sata emulation and e1000 for network Could you please tell me how you got it working in that combination? I tried all weekend, but no success for me. Cheers Quote Link to comment Share on other sites More sharing options...
ink0gnito Posted November 6, 2016 Share #1058 Posted November 6, 2016 I downloaded the created boot.img from WizP and created a vm under proxmox. I assigned the boot.img to an ide hdd. Network is an intel e1000. The VM booted but i didn´t any syno in the network. Quote Link to comment Share on other sites More sharing options...
NeoID Posted November 6, 2016 Share #1059 Posted November 6, 2016 Well, thing is that we can boot image (even orginal) under proxmox (KVM). Issue is that we cant find Syno on the network since driver for proxmox vlans (intel e1000 or virito) is missing from boot image. Solution is simple. We need boot image with proxmox intel e1000 or universal Virito lan driver. I'm using intel e1000 on ESXi and it works. It doesn't show up on find.synology.com, but using the desktop app works. Quote Link to comment Share on other sites More sharing options...
Victorien Posted November 6, 2016 Share #1060 Posted November 6, 2016 (edited) Hello, I've a network card atheros ar8131, but impossible to see my nas on the networks, I looked in the extra.lzma and alt1c driver is present but malgrès that it does not work, any idea? Thank you and sorry for my English I use google translation edit : sorry my card is ar8131 driver alt1c (present too but not ok) and not ar8161 Edited November 7, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
Ponury_Typ Posted November 6, 2016 Share #1061 Posted November 6, 2016 Well, thing is that we can boot image (even orginal) under proxmox (KVM). Issue is that we cant find Syno on the network since driver for proxmox vlans (intel e1000 or virito) is missing from boot image. Solution is simple. We need boot image with proxmox intel e1000 or universal Virito lan driver. I'm using intel e1000 on ESXi and it works. It doesn't show up on find.synology.com, but using the desktop app works. Tried both (app and www) with no luck. Quote Link to comment Share on other sites More sharing options...
Lateral Posted November 7, 2016 Share #1062 Posted November 7, 2016 i use 9211-8i with sas drive. after create raid group and volume, i want to setup 1 drive for hot spare, but there are no raid group shown in the hot spare page. Quote Link to comment Share on other sites More sharing options...
jajchodges Posted November 7, 2016 Share #1063 Posted November 7, 2016 Succesfully loaded 1.01v on my intel core i5-2400 with latest update but can i get my Realtek RTL8111E drivers for network card added so i can use 1gb transfer instead of 100 thanks :)great work to all ppl involoved Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted November 7, 2016 Share #1064 Posted November 7, 2016 (edited) Just some ferdback, instaled on a i3, no vid or pid ou sn configured, everithing went well, works perfect. Just one question i need to compile tbs drivers to teste, where can i get the source you guys are using to compile modules?? Read the OP. Source code is provided. Edited November 7, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
ceramik Posted November 7, 2016 Share #1065 Posted November 7, 2016 Dear jun. i used your bearmental DSM 6 boot image but not work 3ware 9750-8i Raid Controller in yours dsm boot image i want to your dsm 6 boot image in add LSI 9750-8i Raid Controller Drivers import please answer Quote Link to comment Share on other sites More sharing options...
j911 Posted November 7, 2016 Share #1066 Posted November 7, 2016 I have a supermicro amd motherboard with onboard lsi 2008 controller. I can passthrough the controller in esxi 6.0.2 to 1.01 jun image VM and pat file gets installed by showing dsm as migratable. However after reboot I lose all network connectivity. Using the older 5.2 image i see the disks in recoverable state and have to reinstall 6.0.2-8451 pat file which brings it back to migratable and so it keeps looping. Need some help here please Quote Link to comment Share on other sites More sharing options...
jokerigno Posted November 7, 2016 Share #1067 Posted November 7, 2016 Dear Jun, I'm here to say thank you for the hard work. Yesterday I successfully upgraded my Dell T20 to DSM 6. I had only to change some voice on the bios (serial port e HDD mode) and use force install (to avoid error). Now it works like a charm. Inviato dal mio A0001 utilizzando Tapatalk Quote Link to comment Share on other sites More sharing options...
snakefox666 Posted November 7, 2016 Share #1068 Posted November 7, 2016 hello with the last loader on my N40L, the RTL8153 in my hub usb3 doesn't work I found why my UPS was no longer connected, the USB chipset original for N40L does not work, I plugged in my USB3 hub in my PCI usb3 and is now detected Hey jun, do you think that it's possible to integrate the driver for USB chipset of the N40L into your image ? Quote Link to comment Share on other sites More sharing options...
ronin Posted November 7, 2016 Share #1069 Posted November 7, 2016 hello with the last loader on my N40L, the RTL8153 in my hub usb3 doesn't work I found why my UPS was no longer connected, the USB chipset original for N40L does not work, I plugged in my USB3 hub in my PCI usb3 and is now detected Hey jun, do you think that it's possible to integrate the driver for USB chipset of the N40L into your image ? +1 Quote Link to comment Share on other sites More sharing options...
Invidia Posted November 7, 2016 Share #1070 Posted November 7, 2016 Hello everybody, I got a HP N54L with a AMD CPU running on DSM 5.2 and I want to upgrade to DSM 6. I am a little bit confused. May someone help me to understand the progress on how to upgrade it? Befor I start with the upgrade the 1. posts tells me that AMD user should look for the 3rd post. There is a downloadlink which points to a bzImage file. What do I need to do with it? I also downloaded DS3615xs 6.0.2 Jun's Mod V.101. In that zip package there is the synoboot.img I guess I need to write that IMG to a USB key and then change sn/mac/vid/pid. I am missing some instructions how to upgrade. Thank you for any reply. Quote Link to comment Share on other sites More sharing options...
tigs Posted November 7, 2016 Share #1071 Posted November 7, 2016 A few tips for those who can't get Jun's loader work properly. 1, try different USB flash drive. I noticed some "crappy" ones are not working. 2, use proper software to burn the image. win32 imager works, rufus does not. However, rufus is okay with arcao or setsunakawa's loader. 3, use a good text editor to edit the grub.conf file. Notpad++ is okay. 4, you may to manually power cycle the NAS by unplug the power cord 5, last thing try to format USB drive before burning. This may not matter that much. Quote Link to comment Share on other sites More sharing options...
Arcao Posted November 7, 2016 Share #1072 Posted November 7, 2016 Just one question i need to compile tbs drivers to teste, where can i get the source you guys are using to compile modules?? We use quicknick 3.10.77-7274 kernel source from https://github.com/quiknick/7274-kernel (newer is not available). Compilation kernel modules is easy (I found it how to do it in http://setsunakawa.ddns.net/synology/dsm6/developer-guide.pdf): cp synoconfigs/bromolow .config make ARCH="x86_64" oldconfig make ARCH="x86_64" menuconfig make ARCH="x86_64" modules Our kernel modules are saved in extra.lzma. To extract extra.lzma I use this bash script: #!/bin/bash rm -r extra mkdir extra cd extra unlzma -c ../extra.lzma | cpio -im cd .. And for repack: #!/bin/bash cd extra find . | cpio -o -H newc | lzma > ../extra_new.lzma cd .. Kernel modules are loaded in order as they are defined in /etc/rc.modules: EXTRA_MODULES="mii mdio libphy atl1 atl1e atl1c alx uio ipg jme skge sky2 ptp_pch pch_gbe qla3xxx qlcnic qlge netxen_nic sfc e1000 pcnet32 vmxnet3 bnx2 libcrc32c bnx2x cnic e1000e igb ixgbe r8101 r8168 r8169 tg3 usbnet ax88179_178a button evdev" DISK_MODULES="BusLogic vmw_pvscsi megaraid_mm megaraid_mbox megaraid scsi_transport_spi mptbase mptscsih mptspi mptsas mptctl ata_piix megaraid_sas mpt2sas mpt3sas" EXTRA_FIRMWARES="tigon/tg3_tso5.bin tigon/tg3_tso.bin tigon/tg3.bin" For compiling modules from external sources i created symlink from kernel source root to /lib/modules/3.10.77/build. Then most of Makefiles will work without any change. As a build machine I use my nas with installed debian-chroot package. There I just installed build-essential, ncurses-dev and bc packages: sudo apt-get update sudo apt-get install build-essential ncurses-dev bc Quote Link to comment Share on other sites More sharing options...
javakias Posted November 7, 2016 Share #1073 Posted November 7, 2016 Could you please add support for RTL 8139 , RTL 820X , RTL 8169-S in DSM 6 loader? +1 Quote Link to comment Share on other sites More sharing options...
JMRR Posted November 7, 2016 Share #1074 Posted November 7, 2016 Just one question i need to compile tbs drivers to teste, where can i get the source you guys are using to compile modules?? We use quicknick 3.10.77-7274 kernel source from https://github.com/quiknick/7274-kernel (newer is not available). Compilation kernel modules is easy (I found it how to do it in http://setsunakawa.ddns.net/synology/dsm6/developer-guide.pdf): cp synoconfigs/bromolow .config make ARCH="x86_64" oldconfig make ARCH="x86_64" menuconfig make ARCH="x86_64" modules Our kernel modules are saved in extra.lzma. To extract extra.lzma I use this bash script: #!/bin/bash rm -r extra mkdir extra cd extra unlzma -c ../extra.lzma | cpio -im cd .. And for repack: #!/bin/bash cd extra find . | cpio -o -H newc | lzma > ../extra_new.lzma cd .. Kernel modules are loaded in order as they are defined in /etc/rc.modules: EXTRA_MODULES="mii mdio libphy atl1 atl1e atl1c alx uio ipg jme skge sky2 ptp_pch pch_gbe qla3xxx qlcnic qlge netxen_nic sfc e1000 pcnet32 vmxnet3 bnx2 libcrc32c bnx2x cnic e1000e igb ixgbe r8101 r8168 r8169 tg3 usbnet ax88179_178a button evdev" DISK_MODULES="BusLogic vmw_pvscsi megaraid_mm megaraid_mbox megaraid scsi_transport_spi mptbase mptscsih mptspi mptsas mptctl ata_piix megaraid_sas mpt2sas mpt3sas" EXTRA_FIRMWARES="tigon/tg3_tso5.bin tigon/tg3_tso.bin tigon/tg3.bin" For compiling modules from external sources i created symlink from kernel source root to /lib/modules/3.10.77/build. Then most of Makefiles will work without any change. As a build machine I use my nas with installed debian-chroot package. There I just installed build-essential, ncurses-dev and bc packages: sudo apt-get update sudo apt-get install build-essential ncurses-dev bc thanks for the info, already compiled tbs drivers for dsm6, and tested them, everything is working perfectly. the only thing is when crosscompiling it gives me an alert that dependences will not show, and modules dont say dependences(modinfo xxx.ko ) but thats ok, i know what modules i need Quote Link to comment Share on other sites More sharing options...
Invidia Posted November 7, 2016 Share #1075 Posted November 7, 2016 Hello everybody, I got a HP N54L with a AMD CPU running on DSM 5.2 and I want to upgrade to DSM 6. I am a little bit confused. May someone help me to understand the progress on how to upgrade it? Befor I start with the upgrade the 1. posts tells me that AMD user should look for the 3rd post. There is a downloadlink which points to a bzImage file. What do I need to do with it? I also downloaded DS3615xs 6.0.2 Jun's Mod V.101. In that zip package there is the synoboot.img I guess I need to write that IMG to a USB key and then change sn/mac/vid/pid. I am missing some instructions how to upgrade. Thank you for any reply. Got it working. Download DS3615xs 6.0.2 Jun's Mod V.101, put with Win32DiskImager on the USB key. Edit sn/mac/vid/pid as mentioned in first post. Then go to 3rd post download the file and replace it with the file on the usb key. Put the stick into the N54L, wait until "Booting Kernel" comes up. Go to find.synology.com and migrate you files. For me it worked fine, coming from DSM 5.2. Only problem at the moment → no https connections via Apps like ds get, ds audio to the dynamic dns domain from the server. Any ideas? I deleted the history on my phone and added a Let's Encrypt Certificate for the server. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.