adam535 Posted May 18, 2022 Share #1 Posted May 18, 2022 hello when i was refered to installing page this came to me my motherboard only support 3 hdd , is there way to fix this issue i will be grateful Quote Link to comment Share on other sites More sharing options...
maitien2004 Posted May 18, 2022 Share #2 Posted May 18, 2022 Please use SataPortMap=1 and plug hdd to sata0 ----> You can install DSM normally. After that you modify SataPortMap=6 1 Quote Link to comment Share on other sites More sharing options...
adam535 Posted May 18, 2022 Author Share #3 Posted May 18, 2022 Quote Link to comment Share on other sites More sharing options...
adam535 Posted May 18, 2022 Author Share #4 Posted May 18, 2022 i unpluged my hdd from motherboard and reconnected it to every sata in the mother and every time it keeps telling me this error , but every time the numbers of sata ports change Quote Link to comment Share on other sites More sharing options...
adam535 Posted May 18, 2022 Author Share #5 Posted May 18, 2022 2 hours ago, maitien2004 said: SataPortMap=1 and plug hdd to sata0 could you please be more specific , how can i do that, ps: iam trying to install in to computer Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 18, 2022 Share #6 Posted May 18, 2022 (edited) Can you please open a browser to http://<yourip>:7681 and login with user root and no password ? The please execute : lspci -nnqk fdisk -l |grep Disk |grep sd cat /proc/cmdline grep -E "maxdisks|portcfg" /etc/synoinfo.conf and post here the output masking your serial ? Edited May 18, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
adam535 Posted May 18, 2022 Author Share #7 Posted May 18, 2022 7 minutes ago, pocopico said: Can you please open a browser to http://<yourip>:7681 and login with user root and no password ? The please execute : lspci -nnqk fdisk -l |grep Disk |grep sd cat /proc/cmdline Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 18, 2022 Share #8 Posted May 18, 2022 3 minutes ago, adam535 said: Oops sorry, yes lspci will not work in junior (install mode) try the rest. Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 18, 2022 Share #9 Posted May 18, 2022 And ls -l /sys/block/sd* Quote Link to comment Share on other sites More sharing options...
adam535 Posted May 18, 2022 Author Share #10 Posted May 18, 2022 2 minutes ago, pocopico said: Oops sorry, yes lspci will not work in junior (install mode) try the rest. ok Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 18, 2022 Share #11 Posted May 18, 2022 Please sent me the rest of the commands, use copy paste (right click in the window ?) fdisk -l |grep Disk |grep sd cat /proc/cmdline grep -E "maxdisks|portcfg" /etc/synoinfo.conf ls -l /sys/block/sd* Quote Link to comment Share on other sites More sharing options...
adam535 Posted May 18, 2022 Author Share #12 Posted May 18, 2022 Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 18, 2022 Share #13 Posted May 18, 2022 OK, what loader are you using ? You need to set the vid:pid of your USB disk correctly, then of course fix the SataPortMap. I would change to SataPortMap=1 and move up until you find the right one. Quote Link to comment Share on other sites More sharing options...
adam535 Posted May 18, 2022 Author Share #14 Posted May 18, 2022 1 minute ago, pocopico said: OK, what loader are you using ? You need to set the vid:pid of your USB disk correctly, then of course fix the SataPortMap. I would change to SataPortMap=1 and move up until you find the right one. could you kinldly show me how to do SataPortMap , iam using DS3622xs+_7.1-42661 loader Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 18, 2022 Share #15 Posted May 18, 2022 Yes, you may test with reboot and while at GRUB select your boot option (USB) and press "E" use your arrow keys to go down to the line that starts with linux and go to the SataPortMap= and change that to 1 then press F10 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 18, 2022 Share #16 Posted May 18, 2022 If this does not work, i suggest you also change in the same way the HddHotPlug from 0 to 1 1 Quote Link to comment Share on other sites More sharing options...
adam535 Posted May 19, 2022 Author Share #17 Posted May 19, 2022 19 hours ago, pocopico said: If this does not work, i suggest you also change in the same way the HddHotPlug from 0 to 1 Thank you so much , after modifying SataPortMap to 1 and HddHotPlug to 1 it works so fine 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 19, 2022 Share #18 Posted May 19, 2022 Does it work even without HddHotPlug or you did not try without it ? Anyway i'm glad you came past your issue. Quote Link to comment Share on other sites More sharing options...
adam535 Posted May 19, 2022 Author Share #19 Posted May 19, 2022 No it works after i modified HddHotPlug , before i modify it the installatiom went 56% and tells me there is error with dsm version , after i modified HddHotPlug it the installation completed so fine 1 Quote Link to comment Share on other sites More sharing options...
cobalt60 Posted May 21, 2022 Share #20 Posted May 21, 2022 Hi. I'm having a similar issue. I've used these commands to build but when i try to upload the .pat it fails at 47% every time. I've tried various sataportmap settings and enabled hotswap without success. ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-virtio/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json ./rploader.sh build broadwellnk-7.1.0-42661 Quote Link to comment Share on other sites More sharing options...
cobalt60 Posted May 21, 2022 Share #21 Posted May 21, 2022 I downloaded the patch for the DS3622xs+ directly from the synology website and it installed eventually. Quote Link to comment Share on other sites More sharing options...
Victorman Posted May 28, 2022 Share #22 Posted May 28, 2022 В 21.05.2022 в 20:13, cobalt60 сказал: I downloaded the patch What patch do you mean??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.