Ядро молчит.

[HDAemon]

Добрый день. Поискал по форумам и гуглям, перепробовал разные варианты параметров ведра. Прошу подсказать как сделать возможным вывод сообщений загрузки ядра для загрузчика 1.02b. Заранее спасибо.

[XPEH]

COM1

Speed - 115200

Data Bits - 8

Stop Bits - 1

Parity - None

Flow Control - None

[HDAemon]

Спасибо за подсказку. Пока тестирую на VBox вывел com в файл.

cat comport 
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 3599.895 MHz processor
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.79 BogoMIPS (lpj=3599895)
[    0.000990] pid_max: default: 32768 minimum: 301
[    0.001468] Security Framework initialized
[    0.001864] AppArmor: AppArmor initialized
[    0.002280] Mount-cache hash table entries: 256
[    0.002782] Initializing cgroup subsys memory
[    0.003185] Initializing cgroup subsys devices
[    0.003592] Initializing cgroup subsys freezer
[    0.004021] Initializing cgroup subsys blkio
[    0.004470] CPU: Physical Processor ID: 0
[    0.016362] mce: CPU supports 0 MCE banks
[    0.016800] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.016800] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[    0.016800] tlb_flushall_shift: 6
[    0.027701] Freeing SMP alternatives: 24k freed
[    0.028731] ACPI: Core revision 20130328
[    0.029662] ACPI: All ACPI Tables successfully acquired
[    0.031378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.041391] smpboot: CPU0: Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz (fam: 06, model: 9e, stepping: 0b)
[    0.146510] APIC calibration not consistent with PM-Timer: 102ms instead of 100ms
[    0.147240] APIC delta adjusted to PM-Timer: 6250030 (6436473)
[    0.147822] Performance Events: unsupported p6 CPU model 158 no PMU driver, software events only.
[    0.148681] Brought up 1 CPUs
[    0.148962] smpboot: Total of 1 processors activated (7199.79 BogoMIPS)
[    0.149847] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.150487] devtmpfs: initialized
[    0.150953] xor: automatically using best checksumming function:
[    0.160818]    avx       : 21692.000 MB/sec
[    0.161247] NET: Registered protocol family 16
[    0.161838] ACPI: bus type PCI registered
[    0.162292] PCI: Using configuration type 1 for base access
[    0.164524] bio: create slab <bio-0> at 0
[    0.181766] raid6: sse2x1   gen() 11074 MB/s
[    0.198740] raid6: sse2x1   xor()  6410 MB/s
[    0.215712] raid6: sse2x2   gen() 12382 MB/s
[    0.232684] raid6: sse2x2   xor()  8626 MB/s
[    0.249657] raid6: sse2x4   gen() 15289 MB/s
[    0.266634] raid6: sse2x4   xor()  9468 MB/s
[    0.283605] raid6: avx2x1   gen() 24796 MB/s
[    0.300577] raid6: avx2x2   gen() 30023 MB/s
[    0.317551] raid6: avx2x4   gen() 31335 MB/s
[    0.317992] raid6: using algorithm avx2x4 gen() (31335 MB/s)
[    0.318489] raid6: using avx2x2 recovery algorithm
[    0.318936] ACPI: Added _OSI(Module Device)
[    0.319307] ACPI: Added _OSI(Processor Device)
[    0.319705] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.320123] ACPI: Added _OSI(Processor Aggregator Device)
[    0.320818] ACPI: EC: Look up EC in DSDT
[    0.321318] ACPI: Executed 1 blocks of module-level executable AML code
[    0.323147] ACPI: Interpreter enabled
[    0.323524] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568)
[    0.324370] ACPI: (supports S0 S5)
[    0.324685] ACPI: Using IOAPIC for interrupt routing
[    0.325250] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.326126] ACPI: No dock devices found.
[    0.328906] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.329766] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.330448] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.331082] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.331775] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfdffffff] (ignored)
[    0.332465] PCI: root bus 00: using default resources
[    0.332918] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.333946] PCI host bridge to bus 0000:00
[    0.334313] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.334806] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.335349] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[    0.336009] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.336908] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.337896] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[    0.338693] pci 0000:00:01.1: reg 20: [io  0xd000-0xd00f]
[    0.339413] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[    0.341530] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe1ffffff pref]
[    0.347012] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.348270] pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
[    0.349604] pci 0000:00:03.0: reg 18: [io  0xd010-0xd017]
[    0.353001] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[    0.354184] pci 0000:00:04.0: reg 10: [io  0xd020-0xd03f]
[    0.355283] pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
[    0.356451] pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
[    0.359848] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[    0.361162] pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
[    0.365371] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[    0.366303] pci 0000:00:07.0: address space collision: [io  0x4000-0x403f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00004000-0x00004003 flags 0x80000000]
[    0.367575] pci 0000:00:07.0: quirk: [io  0x4100-0x410f] claimed by PIIX4 SMB
[    0.368410] pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
[    0.370030] pci 0000:00:0b.0: reg 10: [mem 0xf0805000-0xf0805fff]
[    0.374386] pci_bus 0000:00: on NUMA node 0
[    0.375072] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.376434] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[    0.377173] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
[    0.377830] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
[    0.378431] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
[    0.379145] ACPI: Enabled 2 GPEs in block 00 to 07
[    0.379594] acpi root: \_SB_.PCI0 notify handler is installed
[    0.380105] Found 1 acpi root devices
[    0.380524] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.381236] vgaarb: loaded
[    0.381482] vgaarb: bridge control possible 0000:00:02.0
[    0.382017] SCSI subsystem initialized
[    0.382355] ACPI: bus type ATA registered
[    0.382765] libata version 3.00 loaded.
[    0.383151] pps_core: LinuxPPS API ver. 1 registered
[    0.383608] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.384426] PTP clock support registered
[    0.384816] PCI: Using ACPI for IRQ routing
[    0.385189] PCI: pci_cache_line_size set to 64 bytes
[    0.385762] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.386291] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[    0.386949] Switching to clocksource refined-jiffies
[    0.387428] AppArmor: AppArmor Filesystem Enabled
[    0.387872] pnp: PnP ACPI init
[    0.388375] ACPI: bus type PNP registered
[    0.388804] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.389427] pnp 00:01: [dma 4]
[    0.389775] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.392533] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.393302] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.394263] pnp: PnP ACPI: found 4 devices
[    0.394675] ACPI: bus type PNP unregistered
[    0.400541] Switching to clocksource acpi_pm
[    0.400945] pci 0000:00:07.0: BAR 13: [io  0x4000-0x403f] has bogus alignment
[    0.401673] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.402182] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[    0.402762] NET: Registered protocol family 2
[    0.403288] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.403953] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.404584] TCP: Hash tables configured (established 16384 bind 16384)
[    0.405643] TCP: reno registered
[    0.405980] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.406531] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.407147] NET: Registered protocol family 1
[    0.407724] RPC: Registered named UNIX socket transport module.
[    0.408502] RPC: Registered udp transport module.
[    0.408921] RPC: Registered tcp transport module.
[    0.415521] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.416144] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.416702] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.418053] pci 0000:00:02.0: Boot video device
[    0.419712] PCI: CLS 0 bytes, default 64
[    0.420158] Trying to unpack rootfs image as initramfs...
[    0.496037] hrtimer: interrupt took 11352280 ns
[    1.212789] Freeing initrd memory: 6336k freed
[    1.213874] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.227717] audit: initializing netlink socket (disabled)
[    1.228267] type=2000 audit(1651855896.123:1): initialized
[    1.235600] bounce pool size: 64 pages
[    1.237330] VFS: Disk quotas dquot_6.5.2
[    1.237753] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.239415] NFS: Registering the id_resolver key type
[    1.240104] Key type id_resolver registered
[    1.240480] Key type id_legacy registered
[    1.240862] msgmni has been set to 4011
[    1.241740] async_tx: api initialized (async)
[    1.242210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.242890] io scheduler noop registered
[    1.243248] io scheduler deadline registered
[    1.243651] io scheduler cfq registered
[    2.127331] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.150084] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.214844] tsc: Refined TSC clocksource calibration: 3600.003 MHz
[    2.215535] Switching to clocksource tsc
[    2.253698] brd: module loaded
[    2.265740] Loading iSCSI transport class v2.0-870.
[    2.295770] rdac: device handler registered
[    2.314557] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.317465] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.317891] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.326395] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.327310] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    2.330026] i2c /dev entries driver
[    2.332171] md: linear personality registered for level -1
[    2.332757] md: raid0 personality registered for level 0
[    2.333239] md: raid1 personality registered for level 1
[    2.333717] md: raid10 personality registered for level 10
[    2.336628] md: raid6 personality registered for level 6
[    2.337153] md: raid5 personality registered for level 5
[    2.337631] md: raid4 personality registered for level 4
[    2.338110] md: raidF1 personality registered for level 45
[    2.339766] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    2.340578] cpuidle: using governor ladder
[    2.340950] cpuidle: using governor menu
[    2.341385] TCP: cubic registered
[    2.341507] NET: Registered protocol family 17
[    2.341508] Key type dns_resolver registered
[    2.353027] registered taskstats version 1
[    2.355105] rtc_cmos rtc_cmos: setting system clock to 2022-05-06 16:51:37 UTC (1651855897)
[    2.359477] Freeing unused kernel memory: 760k freed
[    2.360437] Write protecting the kernel read-only data: 8192k
[    2.361031] Freeing unused kernel memory: 1316k freed
[    2.362033] Freeing unused kernel memory: 496k freed
START /linuxrc.syno
Insert Marvell 1475 SATA controller driver
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore[    2.398121] ACPI: bus type USB registered
[    2.399509] usbcore: registered new interface driver usbfs
[    2.401658] usbcore: registered new interface driver hub
[    2.404451] usbcore: registered new interface driver ethub
[    2.407206] usbcore: registered new device driver usb
 ... [  OK  ]
:: Loading module uhci-hcd[    2.419736] uhci_hcd: USB Universal Host Controller Interface driver
 ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
Insert net driver(Mindspeed only)...
[    2.442085] broadwell_synobios: module license 'Synology Inc.' taints kernel.
[    2.442829] Disabling lock debugging due to kernel taint
[    2.444499] 2022-5-6 16:51:38 UTC
[    2.444868] synobios: load, major number 201
[    2.445254] Brand: Synology
[    2.445520] Model: DS-3617xs
[    2.445805] set group disks wakeup number to 4, spinup time deno 7
[    2.446354] synobios cpu_arch proc entry initialized
[    2.446810] synobios crypto_hw proc entry initialized
[    2.447258] synobios syno_platform proc entry initialized
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[    2.453341] synobios: unload
All disk ready or timeout execeed
Exit on error [1] DISK NOT INSTALLED...
Fri May  6 16:51:38 UTC 2022
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=1023676k,nr_inodes=255919,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 1
starting pid 3181, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
mdadm: error opening /dev/md1: No such file or directory
rc: Use all internal disk as swap.
rc: No internal disk installed.
swapon: can't stat '/dev/md1': No such file or directory
:: Loading module sg ... [  OK  ]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading module dca[    2.580015] dca service started, version 1.12.1
 ... [  OK  ]
:: Loading module e1000e[    2.586307] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[    2.586940] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
 ... [  OK  ]
:: Loading module i2c-algo-bit ... [  OK  ]
:: Loading module igb[    2.597517] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[    2.601744] Copyright (c) 2007-2015 Intel Corporation.
 ... [  OK  ]
:: Loading module ixgbe[    2.610337] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6
[    2.611003] Copyright(c) 1999 - 2016 Intel Corporation.
[    2.611873] ixgbe unsupported_sfp_notify proc entry initialized
 ... [  OK  ]
:: Loading module i2c-i801 ... [  OK  ]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 1...
:: Unloading module adt7475 ... [  OK  ]
:: Unloading module i2c-i801 ... [  OK  ]
:: Loading module i2c-i801 ... [  OK  ]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 2...
:: Unloading module adt7475 ... [  OK  ]
:: Unloading module i2c-i801 ... [  OK  ]
:: Loading module i2c-i801 ... [  OK  ]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 3...
:: Unloading module adt7475 ... [  OK  ]
:: Unloading module i2c-i801 ... [  OK  ]
:: Loading module i2c-i801 ... [  OK  ]
:: Loading module adt7475 ... [  OK  ]
mount: open failed, msg:No such file or directory
mount: mounting /dev/bus/usb on /proc/bus/usb failed: No such device
ln: /proc/bus/usb/devices: No such file or directory
:: Loading module synobios[    8.908395] 2022-5-6 16:51:44 UTC
[    8.908885] synobios: load, major number 201
[    8.909273] Brand: Synology
[    8.909541] Model: DS-3617xs
[    8.909822] set group disks wakeup number to 4, spinup time deno 7
[    8.910380] synobios cpu_arch proc entry initialized
[    8.910833] synobios crypto_hw proc entry initialized
[    8.911315] synobios syno_platform proc entry initialized
 ... [  OK  ]
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

:: Starting syslogd ... [  OK  ]
:: Starting scemd
[   14.020553] parameter error. gpiobase=00000000, pin=45, pValue=ffff88007849fd44
:: Starting services in background
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd
Usage: /usr/bin/minissdpd [-d] [-6] [-s socket] [-p pidfile] -i <interface> [-i <interface2>] ...

  <interface> is either an IPv4 address such as 192.168.1.42, or an
interface name such as eth0.

  By default, socket will be open as /var/run/minissdpd.sock
and pid written to file /var/run/minissdpd.pid
start SSDPD failed
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
cat: can't open '/sys/block/sd*/device//model': No such file or directory
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf
:: Loading module usb-storage[   15.464681] usbcore: registered new interface driver usb-storage
 ... [  OK  ]
:: Loading module hid ... [  OK  ]
:: Loading module usbhid[   15.479333] usbcore: registered new interface driver usbhid
[   15.479860] usbhid: USB HID core driver
 ... [  OK  ]
Excution Error
============ Date ============
Fri May  6 16:51:50 UTC 2022
==============================
starting pid 4568, tty '': '/sbin/getty 115200 console'
Fri May  6 16:51:51 2022

DiskStation login: 

 Вот такой результат. Может кто сталкивался?