BigRut2008 Posted April 26, 2022 Share #1 Posted April 26, 2022 (edited) I have a Dell Optiplex 7080 with an INTEL Core i7-10700, 8gb ram, and a 1tb hdd inside... I have been trying to get the scripts to work, but not having any luck. Has anyone got this to work on the dell 7080 with i7? if so, what command did you use to install the package? Used the non-uefi tinycore-redpill.v0.4.6.img. used these commands from the DSM 7.1 baremetal thread [DS3615xs] ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3615xs ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build bromolow-7.0.1-42218 ./rploader.sh clean now ./rploader.sh build bromolow-7.1.0-42661 (THIS COMMAND DOESN"T WORK). I added just for other to see that it didn't work for me. I now have the below error message. The mini tower i'm using has 1 sata port (1tb hdd) and 2- m.2 ports that are not being used. What file do i update to fix this error? Edited April 26, 2022 by BigRut2008 Quote Link to comment Share on other sites More sharing options...
BigRut2008 Posted April 26, 2022 Author Share #2 Posted April 26, 2022 this is actually my first build.. so i'm not 100% sure. I followed all the steps and got it to this point.. I have no idea how to get rid of the error message thats there. Should i somehow switch to another load that only has 1 drive? If i change the user_config.json SataPortMap = "4" make the 4 a 1 will that work? Quote Link to comment Share on other sites More sharing options...
BigRut2008 Posted April 26, 2022 Author Share #3 Posted April 26, 2022 (edited) tc@box:~$ sudo lspci -vmm Slot: 00:00.0 Class: Host bridge Vendor: Intel Corporation Device: Device 9b43 SVendor: Dell SDevice: Device 09a4 Rev: 05 Slot: 00:02.0 Class: VGA compatible controller Vendor: Intel Corporation Device: Device 9bc5 SVendor: Dell SDevice: Device 09a4 Rev: 05 Slot: 00:08.0 Class: System peripheral Vendor: Intel Corporation Device: Skylake Gaussian Mixture Model SVendor: Dell SDevice: Device 09a4 Slot: 00:12.0 Class: Signal processing controller Vendor: Intel Corporation Device: Device 06f9 SVendor: Dell SDevice: Device 09a4 Slot: 00:14.0 Class: USB controller Vendor: Intel Corporation Device: Device 06ed SVendor: Dell SDevice: Device 09a4 ProgIf: 30 Slot: 00:14.2 Class: RAM memory Vendor: Intel Corporation Device: Device 06ef SVendor: Dell SDevice: Device 09a4 Slot: 00:14.3 Class: Network controller Vendor: Intel Corporation Device: Device 06f0 SVendor: Intel Corporation SDevice: Device 4070 Slot: 00:15.0 Class: Serial bus controller [0c80] Vendor: Intel Corporation Device: Device 06e8 SVendor: Dell SDevice: Device 09a4 Slot: 00:16.0 Class: Communication controller Vendor: Intel Corporation Device: Device 06e0 SVendor: Dell SDevice: Device 09a4 Slot: 00:16.3 Class: Serial controller Vendor: Intel Corporation Device: Device 06e3 SVendor: Dell SDevice: Device 09a4 ProgIf: 02 Slot: 00:17.0 Class: SATA controller Vendor: Intel Corporation Device: Device 06d2 SVendor: Dell SDevice: Device 09a4 ProgIf: 01 Slot: 00:1f.0 Class: ISA bridge Vendor: Intel Corporation Device: Device 0687 SVendor: Dell SDevice: Device 09a4 Slot: 00:1f.3 Class: Audio device Vendor: Intel Corporation Device: Device 06c8 SVendor: Dell SDevice: Device 09a4 Slot: 00:1f.4 Class: SMBus Vendor: Intel Corporation Device: Device 06a3 SVendor: Dell SDevice: Device 09a4 Slot: 00:1f.5 Class: Serial bus controller [0c80] Vendor: Intel Corporation Device: Device 06a4 SVendor: Dell SDevice: Device 09a4 Slot: 00:1f.6 Class: Ethernet controller Vendor: Intel Corporation Device: Device 0d4c SVendor: Dell SDevice: Device 09a4 tc@box:~$ Edited April 26, 2022 by BigRut2008 Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted May 4, 2022 Share #4 Posted May 4, 2022 is there a particular reason you want to build DS3615xs? With your 10th gen processor you should try the DS3622xs+ loader: ./rploader.sh clean now ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build broadwellnk-7.0.1-42218 manual ./rploader.sh clean now ./rploader.sh build broadwellnk-7.1.0-42661 manual Then install the .pat file. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.