albebert Posted April 12, 2022 #1 Posted April 12, 2022 Hi, i'm currently switching from a xpenology to a DS1813+. I wan't to use esata ports as internal. When i modify the synoinfo from : esataportcfg="0x300" internalportcfg="0xff" usbportcfg="0x3f0000" to esataportcfg="0" internalportcfg="0x3ff" usbportcfg="0x3f0000" then reboot (without esata plugged) : ok plug sata drives : ok show as internal. But if i reboot with esata plugged the nas won't boot and go into recovery and need to reinstall it. any idea why i have this issue ? Thanks a lot Quote
Question
albebert
Hi,
i'm currently switching from a xpenology to a DS1813+.
I wan't to use esata ports as internal.
When i modify the synoinfo from :
esataportcfg="0x300"
internalportcfg="0xff"
usbportcfg="0x3f0000"
to
esataportcfg="0"
internalportcfg="0x3ff"
usbportcfg="0x3f0000"
then reboot (without esata plugged) : ok
plug sata drives : ok show as internal.
But if i reboot with esata plugged the nas won't boot and go into recovery and need to reinstall it.
any idea why i have this issue ?
Thanks a lot
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.