Jump to content
XPEnology Community

Advanced Media Extension will not activate dsm7.1-42661


phone guy

Recommended Posts

Doing to update from dsm 701 to 7.1 broken Advanced Media Extensions... It requires a synology account, which I have, a valid serial, when it has (real from another synology box not on my lan), but immediately fails and says to contact customer service.  The rp box is listed in my synology account, but AME still wont work.

 

I see other apps have this issue, what works on 7.1?

Link to comment
Share on other sites

  • 2 weeks later...

It work for me :

 

- Loader version and model: RedPill  DS918+ v7.1.0 (TinyCore 0.4.6 )
- Installation type: BAREMETAL - GA-J3455N-D3H
- Additional comments: Use official Synology .pat file // stock, no additional driver

 

Real DS918+ serial with real synology account

 

dsm.jpg.6cc7c9aee0737298e459cc45fe656a4f.jpg

  • Haha 1
Link to comment
Share on other sites

I have 3622xs+

 

 

 

15 hours ago, real3x said:

It work for me :

 

- Loader version and model: RedPill  DS918+ v7.1.0 (TinyCore 0.4.6 )
- Installation type: BAREMETAL - GA-J3455N-D3H
- Additional comments: Use official Synology .pat file // stock, no additional driver

 

Real DS918+ serial with real synology account

 

dsm.jpg.6cc7c9aee0737298e459cc45fe656a4f.jpg

 

Link to comment
Share on other sites

2022-05-05T05:32:51+02:00 Xpenology synocloudserviceauth[32079]: cloudservice_register_api_key.cpp:293 Register api key failed: Auth Fail
2022-05-05T05:32:53+02:00 Xpenology [Login MyDS Account] Run Config Backup login hook
2022-05-05T05:32:53+02:00 Xpenology license_server_login[32126]: api.cpp:542 Not Login yet
2022-05-05T05:32:53+02:00 Xpenology license_server_login[32126]: user.cpp:43 Failed to logout
2022-05-05T05:32:54+02:00 Xpenology license_server_login[32126]: api.cpp:562 API failed: POST /v1/user/login, response: {"data":{},"errno":256,"lineno":136,"status":false}
2022-05-05T05:32:54+02:00 Xpenology license_server_login[32126]: user.cpp:178 SLSendAPI fail

Link to comment
Share on other sites

Yup they stated that on the upgrade process, now how they will work on non connected nvr’s, like people configuring and taking the nvr to a place with no internet (i know very unlikely), I was happy using the dva flavor of synology best update of surveillance ever and now they saw that you can use dva’s and decided to use online checks for the advanced media extensions, so if you use dva, you cant use x265.

 

So you should stay on 7.0 and AME 1.x

 

Best regards

  • Thanks 1
Link to comment
Share on other sites

  • 2 weeks later...
8 hours ago, pippobimbo said:

Working for me (ds3622xs+ on HP MicroServer Gen8).

You need real SN and MAC address AND « netif_num » argument in « grub.cfg » must match « macx » arguments.

In my particular case:
- netif_num=2
- mac1=0011…
- mac2=0011…

 

I can confirm this. Working with KVM ds3622xs+ with real SN and MAC and just one virtual nic: netif_num=1.

Link to comment
Share on other sites

10 hours ago, pippobimbo said:

Working for me (ds3622xs+ on HP MicroServer Gen8).

You need real SN and MAC address AND « netif_num » argument in « grub.cfg » must match « macx » arguments.

In my particular case:
- netif_num=2
- mac1=0011…
- mac2=0011…

Thanks ! I was successful !!!

Link to comment
Share on other sites

Thanks! But if I add the real SN (from a 918+) to my virtualized DVA3221 it doesn´t boot

Edit: My mistake. I made it boot. 

But I still can´t get the media extensions. It´s telling me to contact with Synology technical support 😅

Edited by franky52
Link to comment
Share on other sites

On 5/26/2022 at 12:21 PM, franky52 said:

Thanks! But if I add the real SN (from a 918+) to my virtualized DVA3221 it doesn´t boot

Edit: My mistake. I made it boot. 

But I still can´t get the media extensions. It´s telling me to contact with Synology technical support 😅

 

Yea I don't think it will work, I will try that approach too, and see, but if you change the serial number of the dva or mac it will disable the 8 free cams, I don't know if they implemented something if you change it back, I will also try to Install AME V1 because I just need HVEC for the H265+ cams.

 

Lets see :D

Link to comment
Share on other sites

Well Tested 3 Methods

 

1.- Using a real serial and Mac of my phisical 920+ and nope, it says to contact synology support.

2.- Tried to install AVEC With package V1, but they wont let.

3.- Spoofing activation will modify the file but wont start or install codecs

 

So, I Will stay with DSM 7.0 don't see yet the benefit of moving to 7.1 if SS 9 is fully supported on 7.0 still.

 

Best Regards,

  • Thanks 1
Link to comment
Share on other sites

On 5/26/2022 at 4:37 PM, vinhnguyen said:

Thanks ! I was successful !!!

 

On 5/26/2022 at 3:09 PM, morfellu said:

 

I can confirm this. Working with KVM ds3622xs+ with real SN and MAC and just one virtual nic: netif_num=1.

 

On 5/26/2022 at 6:34 AM, pippobimbo said:

Working for me (ds3622xs+ on HP MicroServer Gen8).

You need real SN and MAC address AND « netif_num » argument in « grub.cfg » must match « macx » arguments.

In my particular case:
- netif_num=2
- mac1=0011…
- mac2=0011…

Hi I think when you add a MAC adress from a synology Model and not the physical HW  MAC Numbers VMM will not be installed?

Could you confirm?

thanks

 

Edited by nemesis122
Link to comment
Share on other sites

On 5/30/2022 at 5:10 PM, AleAmadoC said:

Well Tested 3 Methods

 

1.- Using a real serial and Mac of my phisical 920+ and nope, it says to contact synology support.

2.- Tried to install AVEC With package V1, but they wont let.

3.- Spoofing activation will modify the file but wont start or install codecs

 

So, I Will stay with DSM 7.0 don't see yet the benefit of moving to 7.1 if SS 9 is fully supported on 7.0 still.

 

Best Regards,

Thank you for your test. I was planning on doing the same during the weekend.. you saved me lot of work 😅.

There´s one last method that I tried and I was partially successful. I copied the contents of the "package" folder (/var/packages/CodecPack/target) from of my fully activated "virtual" 918+ installation (AAC + H265 working but only 2 cameras) to the DVA3221 installation. 

I also spoofed the activation on the DVA3221  but I only was able to "hear" from the cameras, despite the yellow circle with the exclamation was still present in the audio selection.  So AAC was working. But I couldn´t see anything from my H.265 camera. Not even on the desktop app nor the iPad app. 

 

I think I will also stay in DSM 7.0 while a solution shows up because I only use it for surveillance.

 

Link to comment
Share on other sites

On 5/31/2022 at 7:42 AM, nemesis122 said:

 

 

Hi I think when you add a MAC adress from a synology Model and not the physical HW  MAC Numbers VMM will not be installed?

Could you confirm?

thanks

 

 

Hello, I just wanted to note that the people who claimed it worked, all of them have AVEC V. 1 so that version do not requires login,

 

Thank you.

Link to comment
Share on other sites

I tested in VMWare with DS920+ v 7.1.0-42661 real SN real MAC without Synology account and AME v2 did not want to update without signing in.

I had and older Synology account created on PC but without any devices added, so I decided to use that account on this test VM and success.

image.png.b9751b9931d29e43090699febec65483.png

 

After restart there was and update.

 

image.png.3617d5abbb9e79926f603e7cd911414a.png

Edited by sk0rpion
add more info
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...