Jedie Posted September 5, 2016 Share #51 Posted September 5, 2016 I loaded to isl6422.ko module. I wrote wrong earlier to my previous post. Posted via Xpenology.us Quote Link to comment Share on other sites More sharing options...
JMRR Posted September 6, 2016 Author Share #52 Posted September 6, 2016 @Jedie can you try closed source drivers? try this ones from dvb-s section s closed source drivers on my dropbox dvb-core.ko rc-core.ko stv090x.ko tbs6982fe.ko tbs6680fe.ko tbs6923fe.ko tbs6985se.ko tbs6928se.ko tbs6982se.ko tbs6991fe.ko tbs6618fe.ko tbs6983fe.ko tbs6922fe.ko tbs6928fe.ko tbs6991se.ko tbs6290fe.ko tbs6984fe.ko saa716x_core.ko saa716x_tbs-dvb.ko int_type=1 unload the old ones, copy this to a diferent location and insmod them. from modinfo say you need all them to meet dependencies. Quote Link to comment Share on other sites More sharing options...
Jedie Posted September 6, 2016 Share #53 Posted September 6, 2016 I searched in google very much about my problem. Maybee it's not a driver problem. I will set up for a bigger (110 cm) parabola at the next weekend, and I will try that. Maybee it will fix my problem. See you soon. Posted via Xpenology.us Quote Link to comment Share on other sites More sharing options...
Jedie Posted September 6, 2016 Share #54 Posted September 6, 2016 Huh we wrote at same time. Ok I will try these first. Thank you. Posted via Xpenology.us Quote Link to comment Share on other sites More sharing options...
Jedie Posted September 6, 2016 Share #55 Posted September 6, 2016 After when I load these modules and restart my Nas, I run the dmesg. The card had to two other modules. (isl6423.ko, and tbsfe.ko) I restarted, and I loaded again all of these modules. And finally my card working perfect! Thank you very much JMRR! You are the best! Posted via Xpenology.us Quote Link to comment Share on other sites More sharing options...
JMRR Posted September 6, 2016 Author Share #56 Posted September 6, 2016 Cool glad to help. Its good it worked. Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
iruyanka Posted September 6, 2016 Share #57 Posted September 6, 2016 insmod /lib/modules/dvb_test/altera-stapl.koinsmod /lib/modules/dvb_test/cx2341x.ko insmod /lib/modules/dvb_test/cx23885.ko insmod /lib/modules/dvb_test/dvb-core.ko insmod /lib/modules/dvb_test/frame_vector.ko insmod /lib/modules/dvb_test/ir-kbd-i2c.ko insmod /lib/modules/dvb_test/m88ds3103.ko insmod /lib/modules/dvb_test/media.ko insmod /lib/modules/dvb_test/rc-core.ko insmod /lib/modules/dvb_test/tda18271.ko insmod /lib/modules/dvb_test/tveeprom.ko insmod /lib/modules/dvb_test/v4l2-common.ko insmod /lib/modules/dvb_test/videobuf2-core.ko insmod /lib/modules/dvb_test/videobuf2-dma-sg.ko insmod /lib/modules/dvb_test/videobuf2-dvb.ko insmod /lib/modules/dvb_test/videobuf2-memops.ko insmod /lib/modules/dvb_test/videobuf2-v4l2.ko insmod /lib/modules/dvb_test/videobuf-dvb.ko insmod /lib/modules/dvb_test/videodev.ko insmod /lib/modules/dvb_test/xc5000.ko edit to etc/rc.local v4l_tbs_openSource_20160826_all https://www.dropbox.com/sh/31nkgy8ybcj8 ... gpqCa?dl=0 media.ko altera-ci.ko videobuf2-dvb.ko videobuf2-v4l2.ko altera-stapl.ko frame_vector.ko download from your dropbox. and add firmware. http://www.tbsdtv.com/download/document ... .0.tar.bz2 and http://www.dvbsky.net/download/linux/dv ... are.tar.gz but, modules can't find run in lsmod and dmesg. thank you for helping. you are very kind man. JMRR Quote Link to comment Share on other sites More sharing options...
snake2005 Posted September 8, 2016 Share #58 Posted September 8, 2016 Hi JMMR, Drivers for TBS6281SE are the same with TBS6281 ? Thanks Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
JMRR Posted September 8, 2016 Author Share #59 Posted September 8, 2016 No i dont think so. SE uses other bridge , i think icp3. I will have a look. Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
JMRR Posted September 8, 2016 Author Share #60 Posted September 8, 2016 @snake2005 For TBS 6281SE try this modules: media.ko dvb-core.ko si2157.ko si2168.ko tas2101.ko tbsecp3.ko enable_msi=1 (needs firmware see a few posts back) give some output to help. Quote Link to comment Share on other sites More sharing options...
iruyanka Posted September 11, 2016 Share #61 Posted September 11, 2016 I changed tv tuner card. tvheadend appreciate my tuner card. but...I can't scan channel. anyway Thanks, JMRR. Quote Link to comment Share on other sites More sharing options...
Jedie Posted September 12, 2016 Share #62 Posted September 12, 2016 Hi JMRR. I was search the working, stable TVHeadend version of my synology (bromolow). I found the syno.dierkse.nl 4.0.8-1 version, but it is not working. (acces denided problem). Could you help me? Now I have the 4.1 custom version, but it isn't too good. It has a some bugs. Posted via Xpenology.us Quote Link to comment Share on other sites More sharing options...
JMRR Posted September 12, 2016 Author Share #63 Posted September 12, 2016 tvh 4.0.8.1 is a pain in the ass to make it work. it has a problem with autentication, when you install it, the user it adds to dsm is not the same for tvh. the simple way is to desactivate user autentication on tvh start up, and create an admin account, them activate login again. Adding the "-C" to the tvh start_stop_status script like this > start_daemon () { > ${TVHEADEND} -C -f -u ${USER} -c ${INSTALL_DIR}/var -p ${PID_FILE} -l ${LOG_FILE} > } another way is reinstall tvh and when asks for username and password use someting diferent from your dsm login like: user:tvh pass:tvh. think about using 4.1 its way beter. another thing 4.0.8.1 is outdated, the last tvh version stable is 4.0.9-12(not yet on syno repo). i dont use this versions, i have debian chroot instaled and inside i install tvh the version i want(usually the last one). Quote Link to comment Share on other sites More sharing options...
Jedie Posted September 12, 2016 Share #64 Posted September 12, 2016 Thanks for your help. I think I will wait for the 4.0.9 version. I have 4.1 custom version now. The biggest problem with this, when I wach the any channel on TV (streaming) sometimes the streaming is frozen. The TVH write this: "can not decode...channel". If I push the stop button, and I start the channel again, it's ok. I use the OSCAM, but it worked fine latest to my wetek play. I think it's the TVH problem. Or not? Maybee driver problem? Posted via Xpenology.us Quote Link to comment Share on other sites More sharing options...
JMRR Posted September 12, 2016 Author Share #65 Posted September 12, 2016 Cant decode is a oscam problem, se youre configs . Quote Link to comment Share on other sites More sharing options...
Jedie Posted September 13, 2016 Share #66 Posted September 13, 2016 I tried everything, but did not fix it. So I deleted the TVH 4.1, and I installed TVH 4.0.8-1. It fixed my problem. Posted via Xpenology.us Quote Link to comment Share on other sites More sharing options...
TheBlueVoice Posted September 15, 2016 Share #67 Posted September 15, 2016 Hi JMRR, Just a quick follow up a week or 2 on. The TBS card is working great with tvheadend 4.1.2190.. The Afatech usb has stopped working after a few days a couple of times, requiring either pulling out/reinserting or unloading modules and tvheadend etc. I think that's down to the usb drivers though.. Many thanks again, considering getting a tbs quad dvb-t2 card to replace the 6821 as I've had the dreaded 'no cards free' message a few times Your help has allowed me to shutdown my tv server box and only run my main synology box - actually saving me money (on electricity) for once besides being 'cool' lol Quote Link to comment Share on other sites More sharing options...
JMRR Posted September 15, 2016 Author Share #68 Posted September 15, 2016 good to know its working well. usb devices on syno have that problem, from time to time they disconect, i dont know why but i have that problem to. in my case i use sn usb smartreader, and even reboot doesent bring him to live, i have to shutdown and start, or unplug it and plug it again. if some one know why , please bring it on. regardling tbs i have one 6281(dual dvb-c/t) and one 6205(quad dvb-c/t), its an exelent card. i have only one thing to try out, is to use the 6205 dvbt and dvb-c at same time, this card has only on rf in, so does any electronig guro know how to divide inpput? i can combine dvb-c and dvb-t on same cable with a diplexer, but it lost a lot of signal( but works), so its possible. i would like to have 2 tunners on dvb-c and other tu tunners on dvb-t, and remove the 6281. atm i have 6281 using dvb-t(dual), and 6205 using dvb-c(quad), the only way to do this is using open source drivers because tbs doesent allow this on closed source ones( dont know why). the last option is to use um usb dvb-t card, does any one know a good one(preferebly dual, but single is good too). Quote Link to comment Share on other sites More sharing options...
john_matrix Posted November 3, 2016 Share #69 Posted November 3, 2016 Thank for your script JMRR, Do you think something similar can be done on DSM6? This because I have recently updated my Xpe 5.2 to 6.0 and now my USB dongle is not anymore recognized (Elgato EyeTV DTT Deluxe). Seems that the drivers are still in /lib/modules/backports_dvb/ but as I am a noob in Linux administration, a little help would be very very useful * I have tried to load the module dvb-usb-dib0700.ko with insmod but the system tells me that some symbols are missing and modinfo command is not existing anymore on DSM6 Quote Link to comment Share on other sites More sharing options...
JMRR Posted November 3, 2016 Author Share #70 Posted November 3, 2016 i didnt try dsm6, because only have one nas. i think its possible , if modules are compiled against dsm source, ans tool chains. give me a few days and lets see what happens. the only think i dont know is if the loader has DVB enabled or not. Quote Link to comment Share on other sites More sharing options...
john_matrix Posted November 3, 2016 Share #71 Posted November 3, 2016 Thank you for your help Tell me if I can help to do somethings Quote Link to comment Share on other sites More sharing options...
JMRR Posted November 6, 2016 Author Share #72 Posted November 6, 2016 i updated dropbox with modules for DSM6.0, but i didnt test any. feel free to test. Quote Link to comment Share on other sites More sharing options...
F5BJR Posted November 7, 2016 Share #73 Posted November 7, 2016 When i insmod i have an error : Unknow symbol in module ... Quote Link to comment Share on other sites More sharing options...
JMRR Posted November 7, 2016 Author Share #74 Posted November 7, 2016 Usualy its a dependence, another module needs to be aloaded first. What card and what module gives you that? Quote Link to comment Share on other sites More sharing options...
F5BJR Posted November 7, 2016 Share #75 Posted November 7, 2016 Usualy its a dependence, another module needs to be aloaded first.What card and what module gives you that? Tested with some drivers and the errors is with all tested . I have not this error with the original drivers found in folder and compiled by Synology Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.