Hostilian Posted September 17, 2016 Share #476 Posted September 17, 2016 Hmmm.. I seem to have DSM 6 (7393) working on my mini server - Bare metal, not in ESXi. I was using it as something else but had 2 new 3TB drives to do some tests - so that's what I left inside.. DSM 6 was installed onto a USB3 drive - and I booted from there.. Anyway.. Can logon fine, it's on the network etc.. It's still got the same issues with formatting the disks with BTRFS but can use ext4 in RAID 1 on the two 3TB drives (2.7TB usable). It creates shares etc fine and is browsable. It won't shut down when scheduled in a task - though clicking the button on the console works fine.. It installs apps fine (Hyperbackup, log station, Security camera stuff). Currently taking an image of the memory stick (wishing I hadn't used 32GB) so I can fiddle with it.. #H Link to comment Share on other sites More sharing options...
dead2me Posted September 17, 2016 Share #477 Posted September 17, 2016 Hmmm.. I seem to have DSM 6 (7393) working on my mini server - Bare metal, not in ESXi.I was using it as something else but had 2 new 3TB drives to do some tests - so that's what I left inside.. DSM 6 was installed onto a USB3 drive - and I booted from there.. Anyway.. Can logon fine, it's on the network etc.. It's still got the same issues with formatting the disks with BTRFS but can use ext4 in RAID 1 on the two 3TB drives (2.7TB usable). It creates shares etc fine and is browsable. It won't shut down when scheduled in a task - though clicking the button on the console works fine.. It installs apps fine (Hyperbackup, log station, Security camera stuff). Currently taking an image of the memory stick (wishing I hadn't used 32GB) so I can fiddle with it.. #H[/quote Pretty cool. What kind of hardware did you install it on? Link to comment Share on other sites More sharing options...
Hostilian Posted September 17, 2016 Share #478 Posted September 17, 2016 i3 4330 ASUS H87i-Plus 16GB RAM (DDR3 1600) 2x WD RED 3TB 32GB Sandisk ultra fit flash drive I had 3 other drives in it - as it had Server 2012R2 installed - but I've disconnected the power cables while I muck around (so I don't need to reinstall anything).. I've managed to install the mini-updates. First to update 1 (just in case) and then to Update 2.. It's now on DSM 6.0.1-7393 Update 2 (BTRFS still fails when created). Next step is to try to go to 8451.. edit.. Trying to update to 8451 and it says 'the system is not compatible with the patch file'..... hmmm #H Link to comment Share on other sites More sharing options...
dead2me Posted September 17, 2016 Share #479 Posted September 17, 2016 i3 4330ASUS H87i-Plus 16GB RAM (DDR3 1600) 2x WD RED 3TB 32GB Sandisk ultra fit flash drive I had 3 other drives in it - as it had Server 2012R2 installed - but I've disconnected the power cables while I muck around (so I don't need to reinstall anything).. I've managed to install the mini-updates. First to update 1 (just in case) and then to Update 2.. It's now on DSM 6.0.1-7393 Update 2 (BTRFS still fails when created). Next step is to try to go to 8451.. edit.. Trying to update to 8451 and it says 'the system is not compatible with the patch file'..... hmmm #H Trying mine now in a VM. We shall see.... WooWoo: Unknown Error 21.. Glad it wasn't 22 There's a Virtual DSM pat file. The rest reference actual Model Numbers.. https://dedl.synology.com/download/DSM/ ... .0.2/8451/ Interesting... https://www.synology.com/en-us/dsm/6.0/ ... ualization Link to comment Share on other sites More sharing options...
Hostilian Posted September 17, 2016 Share #480 Posted September 17, 2016 I get that error in a VM too.. I did notice that my bare-metal install doesn't have a serial number listed in the System Info section. It's blank.. Does the 6.02 update need a valid serial number or something, I wonder? I've wasted the last while trying to modify the serial number in the system using putty. I had already added it to my syslinux.cfg file (I generated it) but no dice! #H Link to comment Share on other sites More sharing options...
dead2me Posted September 17, 2016 Share #481 Posted September 17, 2016 I imagine you have seen all of these, but just in case: http://xpenology.me/how-to-generate-syn ... alid-pair/ From within that thread.. followed the steps outlined here to edit the bootloader with osfmount and xpenoboot 5.2-5592.2 using the excel tool provided and worked like a charm…. Note, my setup is a DSM on a USB with 4x3TB DIY system. So, I did not configure the cfg file to ignore the IDE boot as indicated in the video, just altered the serial number and mac address as outlined, then burned the xpenoboot img to usb and used the install/upgrade choice on first boot…then installed DSM5.2-5592 pat…everything worked perfectly. Link to comment Share on other sites More sharing options...
Hostilian Posted September 18, 2016 Share #482 Posted September 18, 2016 Yep (thanks though). Read through that and watched the video a couple of days ago (pretty useful). I'm getting caught up fast as I came to the party late! Oh.. I used a slightly different method to get DSM 6 onto my baremetal server.. Modifying the MAC address was the next thing I tried - though it didn't resolve the 'no serial number' issue.. I did use ones generated by the spreadsheet - though didn't try to register them. I 'found' a ds3615xs serial number - but couldnt find a MAC address for it. Is there a way to generate linked MAC's from a valid (It is, I've checked) serial number? Thanks #H Link to comment Share on other sites More sharing options...
dead2me Posted September 18, 2016 Share #483 Posted September 18, 2016 Yep (thanks though). Read through that and watched the video a couple of days ago (pretty useful). I'm getting caught up fast as I came to the party late! Oh.. I used a slightly different method to get DSM 6 onto my baremetal server.. Modifying the MAC address was the next thing I tried - though it didn't resolve the 'no serial number' issue.. I did use ones generated by the spreadsheet - though didn't try to register them. I 'found' a ds3615xs serial number - but couldnt find a MAC address for it. Is there a way to generate linked MAC's from a valid (It is, I've checked) serial number? Thanks #H I don't recall ever registering my Synology device, though I may have. It has always pulled updates. I used the VMDK provided by the OP and it already had the Serial in it. So what method did you use to get it installed on your own hardware if you don't mind sharing? Link to comment Share on other sites More sharing options...
dead2me Posted September 18, 2016 Share #484 Posted September 18, 2016 Yep (thanks though). Read through that and watched the video a couple of days ago (pretty useful). I'm getting caught up fast as I came to the party late! Oh.. I used a slightly different method to get DSM 6 onto my baremetal server.. Modifying the MAC address was the next thing I tried - though it didn't resolve the 'no serial number' issue.. I did use ones generated by the spreadsheet - though didn't try to register them. I 'found' a ds3615xs serial number - but couldnt find a MAC address for it. Is there a way to generate linked MAC's from a valid (It is, I've checked) serial number? Thanks #H I don't recall ever registering my Synology device, though I may have. It has always pulled updates. I used the VMDK provided by the OP and it already had the Serial in it. So what method did you use to get it installed on your own hardware if you don't mind sharing? Link to comment Share on other sites More sharing options...
meimeiriver Posted September 18, 2016 Share #485 Posted September 18, 2016 I don't recall ever registering my Synology device, though I may have. It has always pulled updates. I used the VMDK provided by the OP and it already had the Serial in it. I never registered anything either. So, what benefits are there to registering a seial number/mac address? Will it get rid of the error 21 whilst trying to upgrade? Link to comment Share on other sites More sharing options...
Hostilian Posted September 18, 2016 Share #486 Posted September 18, 2016 To get it working on bare metal, I first tried the install ISO and PAT file manually. No dice. I already had a VM working in VMWare workstation (downloaded earlier in this thread) and noticed the BOOT.vmdk (I knew this worked fine). Basically, I took a copy of Boot.vmdk and ran a great little tool called VMDKtoPhys to transfer it to a USB disk.. (simple, huh) Plugged the new USB Boot drive into my physical machine with my 2x 3TB drives, disabled the sound card in the BIOS (and sorted the boot order).. As it's a USB drive, it's easy to edit the Syslinux.cfg file. Add SN and MAC if you want (when plugged into your normal computer). I booted to the USB drive, selected 'Install' option. Followed the Wizard. Voila, working.. You need to keep booting in install mode (after you've set up the disks). I've set this to the default option now. Downloading the Update-1 and Update-2 files for 7393 manually and installing manually worked fine. Only thing that doesn't work is BTRFS (that I've tested so far) and I can't update to 8451. Oh and it's SERIOUSLY fast - compared to my little Synology 216j NAS.. #H Link to comment Share on other sites More sharing options...
boota Posted September 18, 2016 Share #487 Posted September 18, 2016 Anyone here found how to enable mpt3sas in DSM6 on esxi6? Started with oktisme's work here and have DSM 6 working- just want it to recognize my LSI controller. thanks Link to comment Share on other sites More sharing options...
38aytac38 Posted September 18, 2016 Share #488 Posted September 18, 2016 Is there a way the get quickconnect working on DSM 6? I edited the syslinux.cfg but it still doesn't work and the serial number is still empty in the settings Link to comment Share on other sites More sharing options...
Ziomalski Posted September 18, 2016 Share #489 Posted September 18, 2016 tldr; Would a crossflashed IBM m1015 or a Dell h310 work if I passed it through to a DSM 6 VM on ESXi 6? If flashed in LSI IT mode, both cards should work fine. The matching kernel drivers are included for "older" LSI cards I posted a list of the ko files here: viewtopic.php?f=2&t=16114&start=250#p68157. I'm trying to get passthrough working on my r710 (ESXi 6) with H200 flashed to LSI 2118it. I don't know what I'm doing wrong as it doesn't get recognized in DSM. Maybe I flashed the wrong version it firmware. Can anyone help me out? In ESXi when adding the passthrough, it is recognized as "Dell 6Gbps SAS HBA Adapter". But durring post, it does label the card as 2118IT. Is this normal? Thanks Link to comment Share on other sites More sharing options...
dead2me Posted September 19, 2016 Share #490 Posted September 19, 2016 To get it working on bare metal, I first tried the install ISO and PAT file manually. No dice. I already had a VM working in VMWare workstation (downloaded earlier in this thread) and noticed the BOOT.vmdk (I knew this worked fine). Basically, I took a copy of Boot.vmdk and ran a great little tool called VMDKtoPhys to transfer it to a USB disk.. (simple, huh) Plugged the new USB Boot drive into my physical machine with my 2x 3TB drives, disabled the sound card in the BIOS (and sorted the boot order).. As it's a USB drive, it's easy to edit the Syslinux.cfg file. Add SN and MAC if you want (when plugged into your normal computer). I booted to the USB drive, selected 'Install' option. Followed the Wizard. Voila, working.. You need to keep booting in install mode (after you've set up the disks). I've set this to the default option now. Downloading the Update-1 and Update-2 files for 7393 manually and installing manually worked fine. Only thing that doesn't work is BTRFS (that I've tested so far) and I can't update to 8451. Oh and it's SERIOUSLY fast - compared to my little Synology 216j NAS.. #H Thix for the info, I had not run across VMDKtoPhys before. I have been using a DS414Slim and adding new drives to expand the array has literally taken over a week. I would love to have something faster but don't like the options Synology has as far as processors go. I gave it 4 cores in the VM but it only sees 2. It doesn't throttle CPU much but it will use as much RAM as you give it, as evidenced in the VMWare statistics. It's a pig... Link to comment Share on other sites More sharing options...
Hostilian Posted September 19, 2016 Share #491 Posted September 19, 2016 No worries. Works fine for me! I gave it 4 cores in the VM but it only sees 2. Where are you seeing that on the console? Confirmed using SSH and 'more /proc/cpuinfo' that mine has 4 cores.. Cheers, #H Link to comment Share on other sites More sharing options...
dead2me Posted September 19, 2016 Share #492 Posted September 19, 2016 No worries. Works fine for me! I gave it 4 cores in the VM but it only sees 2. Where are you seeing that on the console? Confirmed using SSH and 'more /proc/cpuinfo' that mine has 4 cores.. Cheers, #H Link to comment Share on other sites More sharing options...
Hostilian Posted September 19, 2016 Share #493 Posted September 19, 2016 I read that that wasn't correct (and safe to ignore).. Try the command I mentioned. #H Link to comment Share on other sites More sharing options...
dead2me Posted September 19, 2016 Share #494 Posted September 19, 2016 Will do.. every so often while it's not doing any visible work it just hammers the CPU. No open sessions or streams, and it goes to 90-95%. Movies stream much better vs. my 414Slim. Go figure btw, in case you had not seen this thread: viewtopic.php?f=15&t=1353&start=150 Link to comment Share on other sites More sharing options...
Hostilian Posted September 20, 2016 Share #495 Posted September 20, 2016 Yep, read through that thread and tried everything. Not that fussed though as I won't be using the features that use it.. Thanks! edit.. Power management (timed shutdowns) working fine on Bare Metal! Link to comment Share on other sites More sharing options...
meimeiriver Posted September 20, 2016 Share #496 Posted September 20, 2016 I would love to have something faster but don't like the options Synology has as far as processors go. I gave it 4 cores in the VM but it only sees 2. It doesn't throttle CPU much but it will use as much RAM as you give it, as evidenced in the VMWare statistics. It's a pig... The Info Center data for your CPU is either simply hard-coded (to conform to the model used), or otherwise bogus. For instance, the Info Center tells me I have an INTEL Core i3-4130, with 2 cores, whereas 'more /proc/cpuinfo' correctly shows an i7 980X, with CPU 0 and CPU 1, each with 2 cores (exactly as I specified in the VM). Link to comment Share on other sites More sharing options...
dead2me Posted September 20, 2016 Share #497 Posted September 20, 2016 I would love to have something faster but don't like the options Synology has as far as processors go. I gave it 4 cores in the VM but it only sees 2. It doesn't throttle CPU much but it will use as much RAM as you give it, as evidenced in the VMWare statistics. It's a pig... The Info Center data for your CPU is either simply hard-coded (to conform to the model used), or otherwise bogus. For instance, the Info Center tells me I have an INTEL Core i3-4130, with 2 cores, whereas 'more /proc/cpuinfo' correctly shows an i7 980X, with CPU 0 and CPU 1, each with 2 cores (exactly as I specified in the VM). Pretty much the same here. I gave it 4 cores of a Xeon and it shows two cores of an i3 Link to comment Share on other sites More sharing options...
dead2me Posted September 20, 2016 Share #498 Posted September 20, 2016 I would love to have something faster but don't like the options Synology has as far as processors go. I gave it 4 cores in the VM but it only sees 2. It doesn't throttle CPU much but it will use as much RAM as you give it, as evidenced in the VMWare statistics. It's a pig... The Info Center data for your CPU is either simply hard-coded (to conform to the model used), or otherwise bogus. For instance, the Info Center tells me I have an INTEL Core i3-4130, with 2 cores, whereas 'more /proc/cpuinfo' correctly shows an i7 980X, with CPU 0 and CPU 1, each with 2 cores (exactly as I specified in the VM). Pretty much the same here. I gave it 4 cores of a Xeon and it shows two cores of an i3 Link to comment Share on other sites More sharing options...
abced Posted September 20, 2016 Share #499 Posted September 20, 2016 Info of CPU is hardcoded in DSM, so it will always show i3. This has been said unlimited times around here already. Link to comment Share on other sites More sharing options...
dead2me Posted September 21, 2016 Share #500 Posted September 21, 2016 Info of CPU is hardcoded in DSM, so it will always show i3. This has been said unlimited times around here already. it's a good thing there's no limit, because you just said it again... Link to comment Share on other sites More sharing options...
Recommended Posts