Jump to content
XPEnology Community

5.2 로 다운그래이드 가능한가요? (6.0 업그레이드중문제)


djtiger77

Recommended Posts

그동안 DSM 5.2 update 4 버전을 사용중이였습니다.

근데 아무생각없이 최신버전 업데이트를 시행하였더니 DSM 5.2 update 5버전이 아니고 DMS 6.0으로 넘어갔는데..

쭉 설치진행하고 다시시작이 되면서 연결실패 및 수동검색화면이 뜹니다. 수동검색을 해서 다시 연결후(상태는 마이그레이션 가능) 다시 설치진행 및 다시시작후에는 처음 연결실패 및 수동검색화면으로 돌아갑니다. (계속반복). 보다보니 6.0으로 업데이트 되면서 생긴문제 같은데요.

그래서 수동설치로 DSM 5.2 update5버전으로 업로드후 설치진행을 하면 6.0버전이상으로 파일업로드해서 설치하라는 에러메세지가 뜨네요. ㅠㅠ

 

보다보니 부트로더와 DSM 버전 미스매치같은데 부트로더가 6.0버전이 나오면, 그버전으로 업그레이드를 해주면 해결이 될까요?

현재상황에서는 5.2버전으로 다운그래이드해서 쓸수있는 방법이 없는지요?

현재상황에서 데이터만 다시 살릴방법은 없는지요? ㅠㅠ

 

부트로더가 5.2버전대라 DMS 5.2버전대로 설치하면 되야되는게 맞는것 같은데...

뒤늦게 찾아보니 6.0부트로더 나오기전까지는 업데이트 하지마라는 글들을 발견하고 좌절입니다. 암생각없이 업데이트 진행했다가 난감해 졌네요.

Link to comment
Share on other sites

DISCLAIMER!

주의!

I’ll take no responsibility for any loss of data or any other problem caused by following this tutorial.

나는 이 설명서를 읽고 발생하는 어떠한 데이터 손실에 대해서도 책임지지 않는다.

 

Reinstall DSM (eg 5.2-5644) without losing the data on Volume:

DSM을 볼륨의 데이터 손실업이 재설치하는 방법

 

01. Enable SSH if it`s not & connect to SYNOLOGY

01. SSH 활성화

02. Open & edit the file \etc.defaults\VERSION

02. 파일을 열고 수정 \etc.defaults\VERSION

03. Exchange the data with one of previous ver.:

03. 이전버전의 데이터로 변경

 

 

majorversion="5"

minorversion="2"

buildphase="0"

buildnumber="5592"

builddate="2012/12/05"

 

04. Save & Exit

04. 저장 및 종료

05. Restart Synology

05. 재시작

06. Launch Synology Assistant

06. 어시던트 실행

07. Click 'Search'

07 검색

08. If you've done everything correctly you'll see a new 'DiskStation' has been found.

08 만일 올바르게 수정할 경우 'Diskstation'을 발견할 수 있다.

09. Disconnect the USB flash drive from the computer for this next step

09.다음단계에서 USB메모리를 컴퓨터로 분리하고 설치를 선택

10. Right-click the new 'DiskStation' and choose 'Install'

10. DiskStation의 오른쪽마우스를 클릭하고 '설치'를 실행

11. Browse and select the same version (5.2-5644.pat) which U already running

11. 5.2.5644를 선택

12. Choose a Name for the DiskStation, a new default admin password and IP configuration

12. Diskstaion 을 선택하고 새로운 관리자 비번과 ip설정

13. After installation is complete the DiskStation will reboot automatically.

13. 설치후에 자동으로 재부팅됨

14. Power it OFF manually now

14. 수동으로 전원OFF

15. Isert the same USB Flash drive (5.2-5644.img) back into PC

15. 기존의 USB메모리를 삽입

16. Power on PC & DSM will boot normally

16. 전원을 켜면 부팅됨

17. In Synology Assistant click 'Search' again

17 어시던트를 클릭해서 검색 실행

18. Depending on the name and network config you chose during installation you will see now a DiskStation has been found with the NAME you chose.

18. 설치중에 설정한 이름과 네트워크정보로 너는 Diskstion 을 발견할 수 있다.

 

 

여튼 발로 번역해 드렸으니 대충 보시고 하시면 됩니다.

원문 : viewtopic.php?f=2&t=13288

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...