How to have DS3622xs recognize nvme SSD cache drive (Maybe works on other models).
So I migrated my xpenology server from DS918+ model to DS3622xs, and the nvme cache no longer works since the model number no longer exist in libsynonvme.so.1. I dig into the libsynonvme.so.1 and found it might check your pcie location to have the nvme drive works properly. After inspect the file, I found it just checks /etc.defaults/.extensionPorts and we just need to modify that.
Here are the steps:
1. Check your nvme pci location(in my case it's 0000:00:01.0😞
udevadm inf
Hi to all,
Finally, I've configured SSD Cache in DSM 7.0.1 using virtual disks configured in ESXi. Here the disk configuration of the Virtual Machine (that hosts the DSM):
- redpill bootdevice: SATA disk.
- volume disks: configured as SATA disks.
- cache disks: configured as SCSI over paravirtual SCSI controller, and with the VMX config file edited to add scsi0:0.virtualSSD = "TRUE" for each cache disk.
Then I installed redpill tinycore for DS3622xs+ with D
