Jump to content
XPEnology Community

DSM 7.1-42550 (Beta)


ilovepancakes
Message added by Polanskiman,

Please read the READ ME topic before posting:

 

Recommended Posts

1326316813_Screenshot2022-02-22at09-25-52DSM71BetaDownloadCenter.thumb.png.52cc851eb7bfb386225bd0d71ea42e11.png

 

https://prerelease.synology.com/en-global/download/dsm71_beta?builtin_name=synology_bromolow_3615xs

 

Spoiler

Important Note

This beta software is for evaluation purposes only and should not be installed in production environments. Synology cannot be held responsible for any damage, such as accidental data loss, caused by this beta software.

After installing this update, you will not be able to downgrade to a previous DSM version.

This update will restart your Synology NAS.

For the following models, DSM 7.1 will be the last upgradable version.

XS Series: RS3413xs+, RS10613xs+, RS3614xs+, RS3614xs, RS3614RPxs, RC18015xs+, DS3615xs, DS2015xs

Plus Series: DS2413+, DS1813+, DS1513+, DS713+, RS2414RP+, RS2414+, RS814RP+, RS814+, DS214+, RS815RP+, RS815+, DS2415+, DS1815+, DS1515+, DS415+, DS215+

Value Series: RS814, RS214, DS414, DS214, DS214play, DS114, RS815, DS1515, DS715, DS415play, DS115

J Series: DS213j, DS414slim, DS414j, DS214se, DS215j, DS115j, DS216se

Adjusted the LED indicator for drives' health status. When a drive's health status is critical or failing, the indicator will show static orange.

Windows 2000 domains are no longer supported.

Removed the "Synchronize with an NTP server every time a domain user signs in" option for Domain/LDAP advanced settings. Users can configure the "Synchronize with NTP server" option at Regional Options > Time instead.

Added support for the UPS power-off function at Control Panel > Hardware & Power > UPS.

Synology Storage Replication Adapter can only be used with DSM 7.0.1 or earlier versions. If you are using or plan to use Synology Storage Replication Adapter, please continue to use the current DSM version.

What’s New

SSD Cache Groups can be allocated to multiple volumes, allowing for more flexible management of SSD cache capacity.

Storage Manager now supports the management of the drives and storage of both active server and passive server in a Synology High Availability cluster.

If there is a file system error, DSM will unmount the volume to run file system checks without interrupting the services on other volumes.

Reduced the minimum threshold for low capacity notification from 5% to 3%.

Added support for custom OIDC (OpenID Connect) settings to integrate DSM with external SSO servers.

Added support for the RTF editor to allow users to preview notification message content and style in real-time when editing.

Added support for bypass traverse checking at Control Panel > File Services > Advanced to allow users to traverse folders and access permitted files or subfolders.

Supports specifying domains from the list of trusted domains to synchronize domain data.

Added the Greenwich Mean Time (GMT+00:00) time zone option at Control Panel > Regional Options > Time.

Added the synchronization status between DSM and NTP servers at Control Panel > Regional Options > Time.

Added icons on the taskbar to indicate ongoing background tasks that might affect system performance.

Users can now open tabs directly from search results in Control Panel.

Supports automatically updating the domain database and syncing domain data regularly. For Synology NAS that are used to create domains, the "Update User Groups/Lists" option in Control Panel > Domains/LDAP will be disabled by default after updating to DSM 7.1 Beta.

Limitation

The update progress bar on a Synology High Availability cluster might not display the actual progress percentage. This won't affect the update progress.

 

Edited by ilovepancakes
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 7.0.1-42218 UPDATE 2

- Loader version and model: Tinycore Redpill DS3615xs

- Using custom extra.lzma: NO

- Installation type: ESXi v7U3c

- Additional comments: Update completes and reboots successfully but DSM installation wizard comes up after reboot and prompts for a recover/migration of disks. After choosing to "Recover" via button provided, DSM takes a few seconds to "Recover" then reboots again. Same recover prompt/wizard comes up again, so DSM won't load fully.

Link to comment
Share on other sites

  • 1 month later...

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 7.0.1-42218 UPDATE 3

- Loader version and model: Tinycore-Redpill UEFI v0.4.6 DS918+

- Using custom extra.lzma: NO

- Installation type: Baremetal

- Additional comments:

 

Tried updating to DSM 7.1-42621 Release Candidate

 

Update completes and reboots successfully and Synology Assistant is able to find updated DSM through a scan but the status is Recoverable and the version reported is 7.0.1-42218 (update 3 is now missing from the version).

 

Link to comment
Share on other sites

  • 3 weeks later...

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Redpill Tinycore UEFI V0.4.5 DSM 7.0.1-42218 UPDATE 3 (DS918+)

- Loader version and model: Redpill Tinycore UEFI V0.4.6 DSM 7.1-42661 (DS918+)

- Using custom extra.lzma: NO

- Installation type: Baremetal

- Additional comments: Use official Synology .pat file.

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 7.0.1-42218

- Loader version and model: Tinycore-Redpill v0.4.6 vmdk (VMware image)

- Using custom extra.lzma: NO

- Installation type: ESXI 6.7

- Additional comments:

 

I can't update to these version either:

- 7.0.1-42218 Update 3
- 7.1-42621 RC

 

After the update is loaded and the Synology reboots, DSM does not boot anymore. Web UI can't be accessed and can't even ping the IP.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.0.1-42218

- Loader version and model: Tinycore-Redpill v0.4.6 vmdk (VMware image) DS3622xs+

- Using custom extra.lzma: NO

- Installation type: ESXI 6.7

 

After more trial and error, I adjusted a solution meant for baremetal from here:

https://xpenology.com/forum/topic/53817-redpill-tinycore-loader/page/100/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...