Domery Posted February 21, 2022 Share #1 Posted February 21, 2022 Hi, tanks a lot for the support! i have this problem now, when i try to install my xpenology on my server, i found my server, but the system cant found hdd! my server have (sas hdd) inside, somebady can help me ? i tryed with synoboot_3615, with one versione before, and i cant found the hdd, but with this version (XPEnology_DSM_6.1.x-quicknick-3.0) i can see the server and hdd, but when i try to install PAT file, go back and give me back error. how i can resolve ? Thanks a lot. Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 23, 2022 Share #2 Posted February 23, 2022 dsm only supports non raid controller in HBA mode or IT mode there seemed always to be some problems with the hpsa driver too maybe try this to switch the controller in hba mode https://medium.com/@terryjx/enable-it-mode-on-hp-smart-array-p410i-raid-card-on-hp-dl380-gen7-servers-4e827eeb78ca or use a more common/supported hba like sas2008 based cards (lots of oem cards for cheap, need to be flashed into IT mode, not IR mode) on normal systems a sata/ahci controller would be suggested but as you want/need to use your sas backplane ... the generic one is LSI 9211-8i if the hp controller is in raid mode you could define every single disk as a raid0, but that would make it hard to distinguish between disks when one fails or you use a hypervisor like esxi or proxmox, that way you can use the controller the normal raid way and have the storage virtual to dsm 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.