Jump to content
XPEnology Community

USB Drives as Internal Drives in XPEnology DSM 7


tintun2022

Recommended Posts

Hello,

 

I wonder if someone could help me out.  I can get the USB drives to act as internal drives in XPEnology DSM 6.2.3 by changing the

/etc.defaults/synoinfo.conf and /etc/synoinfo.conf

 

esataportcfg="0"
internalportcfg="0xffffffffff"
usbportcfg="0"
maxdisks=24

 

but I can't do that in DSM 7, because every time it reboots it reset to default values, I tried both XPEnology DS3615xs and DS918+ and did not work.

 

Thanks

 

Link to comment
Share on other sites

  • 4 months later...

@flyride also this configs doesn´t work. 

 

On my Test Xpenology DS918+ on DSM 7.1 the "synoinfo.conf"

Quote

AppleTalk="eth0"
BS_Thr_Enable="yes"
BS_Thr_Value="50"
HddEnableDynamicPower="yes"
addport="no"
allowanonymous="yes"
arp_ignore="yes"
auto_poweroff_timer="0"
autoblock_attempt_min="5"
autoblock_attempts="10"
autoblock_expriedday="0"
btrfs_default_compression="zstd"
buzzeroffcfg="0x00"
buzzeroffen="0xffff"
cache_advisor_default_size_gb="2048"
cache_max_total_size_gb="0"
cache_skip_seq_io_min_num_disk="1"
cache_support_pin="yes"
cache_support_skip_seq_io="yes"
codepage="ger"
company="synology"
company_title="Synology"
configured="yes"
ddns_reclaim_interval_mins="3"
ddns_select=""
ddns_update="no"
defaultfs="btrfs"
defgroup="users"
defquota="5"
defright="writeable"
defshare="public"
disk_inode_warning_percent="0.05"
disk_swap="static"
diskcache="on"
dsmtimeout="15"
enableRCPower="no"
enable_fan_debug="0x0"
enable_syno_token="yes"
enable_zram="yes"
enableguest="no"
esata_disk_warning_percent="0.1"
esata_partition_warning_percent="0.1"
esataportcfg="0x00000000"
eth0_mtu="1500"
eth0_wol_options="d"
eth1_mtu="1500"
eth1_wol_options="d"
ew20_website_url="https://account.synology.com/"
frame_options_built_in_allow_url="gofile.me/,find.synology.com/"
frame_options_deny_url=""
group_thread_cnt="auto"
hostname="DiskStation"
hostname_alias="SynologyNAS"
internal_disk_without_led_mask="no"
internalportcfg="0xffff"
is_business_model="no"
iscsi_target_type="lio4x"
language="def"
mailfrom="Synology DiskStation"
maillang="ger"
manager="Synology DiskStation"
max_btrfs_snapshots="65536"
max_c2fs_num="10"
max_dr_replica="32"
max_ha_spacecount="64"
max_iscsiluns="256"
max_iscsitrgs="128"
max_snapshot_per_lun="256"
max_snapshots_per_share="1024"
max_volumes="512"
maxaccounts="2048"
maxdisks="24"
maxgroups="256"
maxlanport="2"
maxlogsize="64"
maxprinters="2"
maxshares="512"
mem_max_mb="8192"
mem_min_mb="4096"
mfp_autotimer="60"
mfp_manualtimer="300"
myds_region_api_base_url="https://example.com"
netbkp="yes"
ntpdate_period="daily"
ntpdate_run_client="yes"
ntpdate_run_server="no"
ntpdate_server="time.google.com"
ntpdate_server_backup=""
online_help_base_url="http://help.synology.com/"
package_update_channel="beta"
php_openbasedir_customize="no"
pkg_source_trust_level="0"
pkg_term_version="0003"
pkgupdate_server="https://pkgupdate7.synology.com"
platform_name="apollolake"
portmap_admin="no"
portmap_ftp="no"
portmap_http="no"
portmap_http_add="no"
portmap_netbkp="no"
portmap_netbkp_encrypt="no"
printer_driver_host="https://global.download.synology.com/airprint/DSM7.0/latest"
product="DiskStation"
pswdprotect="no"
pushbrowser_server="https://notification.synology.com/web/"
pushservice_server="https://sns.synology.com/api/"
redirect_server="https://gofile.me/"
remain_life_mail_notify_thr_value="5"
remain_life_show_thr_value="20"
remain_life_thr_enable="yes"
remain_life_thr_value="10"
retain_admin_pwd="no"
rss_server="http://example.com/null.xml"
rss_server_ssl="https://example.com/null.xml"
rss_server_v2="https://update7.synology.com/autoupdate/v2/getList"
runmediaservice="no"
runupnp="no"
s2s_task_max="16"
sata_deep_sleep_en="yes"
satadeepsleeptimer="1"
sb_month_left_thres_value="6"
sb_month_left_warn_enable="yes"
sdcard_partition_warning_percent="0.05"
sdcard_warning_percent="0.05"
sdcopy="no"
sdkversion="no"
security_version_server="https://update7.synology.com/securityVersion"
showdisktemperature="yes"
small_info_path="https://example.com/null"
smsinterval="1"
smsneedinterval="no"
smspass=""
smsphone1=""
smsphone2=""
smsport="80"
smssepchar="+"
smsserver="clickatell"
smsssl="yes"
smstemplate="https://api.clickatell.com/http/sendmsg?user=@@USER@@&password=@@PASS@@&api_id=3148203&to=@@PHONE@@&text=@@TEXT@@"
smstest="no"
smsuser=""
ss_cms="yes"
ss_sync_event_player="yes"
ss_vs="yes"
standby_force="yes"
standbytimer="20"
strong_password_enable="yes"
supplang="enu,cht,chs,krn,tha,ger,fre,ita,spn,jpn,dan,nor,sve,nld,rus,plk,ptb,ptg,hun,trk,csy"
supportMFP="yes"
supportMTU="yes"
supportNFS="yes"
supportNFSKerberos="yes"
supportTc="yes"
supportVLAN="yes"
support_aesni_intel="yes"
support_app_privilege="yes"
support_apparmor="yes"
support_audio="yes"
support_auto_poweron="yes"
support_auto_repair="no"
support_btrfs="yes"
support_buzzer="yes"
support_c2fs="yes"
support_cable_overview="no"
support_chassis_sn="no"
support_console_port="no"
support_directory_service="yes"
support_disk_compatibility="no"
support_disk_hibernation="yes"
support_disk_latency_monitor="yes"
support_disk_msgr="yes"
support_disk_performance_test="yes"
support_disk_report="yes"
support_download="yes"
support_dr_replica="yes"
support_dr_snap="yes"
support_dsl_cmd="yes"
support_ez_internet="yes"
support_fan="yes"
support_fan_adjust_dual_mode="yes"
support_fast_repair="yes"
support_fw_security="yes"
support_group="yes"
support_ha="yes"
support_hfsplus_rw="yes"
support_hotspare="yes"
support_ihm="yes"
support_img_backupd="yes"
support_ipsec="yes"
support_iscsi_btrfs_lun="yes"
support_iscsi_lunbkp="yes"
support_iscsi_plugin="yes"
support_iscsi_target="yes"
support_iscsi_target_block="no"
support_led_behavior_v2="yes"


support_mib="yes"
support_mib_adv_mode="yes"
support_mtd_serial="yes"
support_online_compr_switch="yes"
support_oob_ctl="no"
support_ovs="yes"
support_performance_event="yes"
support_postgresql_data_checksums="yes"
support_power_recovery="yes"
support_power_schedule="yes"
support_poweroff="yes"
support_printer="yes"
support_raid_disk_replacement="yes"
support_raid_dummy_read="no"
support_s2s="yes"
support_s2s_server="yes"
support_sct_cmd="yes"
support_share_encryption="yes"
support_share_quota="yes"
support_share_snapshot="yes"
support_share_user_quota="yes"
support_skip_copy="yes"
support_spectre_meltdown_mitigation="yes"
support_spectre_meltdown_mitigation_full="yes"
support_ssd_cache="yes"
support_ssd_related_ui="yes"
support_ssd_trim="yes"
support_stgmgmt_task_queue="yes"
support_storage_mgr="yes"
support_syno_hybrid_raid="yes"
support_synoacl="yes"
support_synodrive_ability="no"
support_synodrive_rule="1"
support_synopkg="yes"
support_synorbd_vspace="yes"
support_sys_time="yes"
support_task_scheduler="yes"
support_timebkp_server="yes"
support_trim="yes"
support_tutorial="yes"
support_upgrade_space_preserve="yes"
support_vaai="yes"
support_wdda="yes"
support_webinstall="yes"
support_wimax="yes"
support_wireless="yes"
support_wireless_number="2"
support_wol="yes"
support_wol_but_not_enable_ui="no"
support_write_cache="yes"
support_xa="no"
support_zram="yes"
supportdcacheui="yes"
supportddns="yes"
supportdomain="yes"
supportext4="yes"
supportfileindex="yes"
supportfilestation="yes"
supporthfsplus="yes"
supportitunes="yes"
supportldap="yes"
supportmediaservice="yes"
supportmemtest="yes"
supportmount="yes"
supportntfswrite="yes"
supportnvme="yes"
supportphoto="yes"
supportphotopersonal="yes"
supportquota="yes"
supportraid="yes"
supportraidcross="yes"
supportrcpower="yes"
supportrsrcmon="yes"
supportsmart="yes"
supportsnapshot="yes"
supportssh="yes"
supportstartupd="yes"
supportsurveillance="yes"
supportsystemperature="yes"
supportsystempwarning="yes"
supporttrustdomain="yes"
supportuart2="yes"
supportups="yes"
supportvideostation="yes"
surveillance_camera_max="40"
synobios="apollolake"
syslogport="514"
systemfs="ext4"
timebkp_max_task="8"
timezone="Amsterdam"
token_invalid_referer="fbsharing,fbdownload"
token_valid_user_agent=""
unique="synology_apollolake_918+"
update_server="http://update7.synology.com/"
update_server_ssl="https://update7.synology.com/"
updateurl="http://example.com/"
upgrade_pkg_dsm_notification="yes"
upnpdevicetype="DiskStation"
upnpfriendlyname="DiskStation Device"
upnpmanufacturerurl="http://www.synology.com/"
upnpmodeldescription="DiskStation UPnP Device"
upnpmodelname="DS918+"
upnpmodelurl=""
usb_disk_warning_percent="0.05"
usb_partition_warning_percent="0.05"
usbbkp="yes"
usbcopy="no"
usbportcfg="0xffff"
use_reserved_more_gdt="no"
vender="Synology Inc."
vpn_conn_max="40"
vs_version="1.1"
win98autodisconnect="yes"
wins="none"
wol_enabled_options="g"

support_bde_internal_10g="no"
support_memory_compatibility="no"
rolling_group_id="5878"
dsm_installation_id="eed7b44c-426b-4c84-abc1-5ea3b0873b2b"
disable_volumes=""
userpreference_realpath="/volume1/@userpreference"
ip_country=""
install_agent="webinstall"
smbxferlog="yes"
usb_standbytimer="0"
admin_configured="yes"
last_admin_login_build="426611"
upgrade_pkg_email_notification="no"
enable_pkg_autoupdate_all="no"
enable_data_collect="no"
udc_check_state="7.1"
confautobkp_check_state="done"
mib_check_state="7.1GM"
welcome_hide="yes"
promote_ew="yes"
brm_enable="no"
user_saw_new_upgrade_setting_toast="1"
showpooltab="yes"
first_admin_login_done="yes"
portcheck="yes"
dsm6_upgrade_to_dsm7_done="yes"
pushservice_ds_info_updated="no"
 

 

Edited by Chris007
Link to comment
Share on other sites

  • 3 months later...
  • 1 month later...
On 2/21/2022 at 1:36 AM, flyride said:

Internalportcfg set in user_config.json?  Update that instead.

 

Old thread, i get it.. But i have opposite problem i believe..

Can you help flyride?

 

So no matter what device i plug into any usb port of my DS918+ 7.1 ARPL, it instantly recognizes it as INTERNAL, i need to use EXTERNAL USB to transfer files to the NAS.

 

What could i have done wrong, to where i cannot use USB EXTERNALLY????

 

I've tried multiple ports, flash drives and external hdd/ssds

 

 

And could This Below, be a solution?

https://mariushosting.com/synology-how-to-add-usb-support-on-dsm-7/

 

 

 

Edited by Captainfingerbang
Link to comment
Share on other sites

  • 2 months later...

@CaptainfingerbangI had the same issue and found the solution.

 

When using ARPL, you need to set the correct number of max drives when you configure the ARPL.
when not setting this number manually, if you don't use enough internal discs, all additional USB drives will be seen as internal discs in their place. Like drives 21, 22 and so on.

 

Setting the max number of drives correctly, will fix the problem.
Number: ARPL disc + your internal discs.

Like: 1 + 2 internal discs mean set it to max 3 discs.

 

Then, all usb discs attached, will normally be seens as external discs.

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...
On 10/17/2022 at 4:02 PM, webaib said:

It's actually possible and it works. You need to add/change in the user_config.json file follow lines

"synoinfo": {

  "maxdisks": "22",

  "esataportcfg": "0",
  "usbportcfg": "0",
  "internalportcfg": "0xffffffff",

  ...

 

 

I changed this in ARPL and my disks still don't show?? I had it working in DSM 6.2, was wanting to upgrade to 7.2.

Link to comment
Share on other sites

  • 2 weeks later...

hello,
I wanted to report that after upgrading ARPL to latest version and also being on latest dsm for ds918+, running baremetal on lenovo y410p laptop with usb 3 4bay mediasonic probox as the drive enclosure.

was working fine until I lost power, now I have tried reinstalling, DSM with arpl so many times I am the point of giving up since there doesnt seem to be many people who are having this issue. 
 

Previously was able to set to these last known working values during dsm 7.0.1

lkm: dev
model: "DS918+"
build: "42218"
sn: "serialnumber"
maxdisks: "24"
layout: qwerty
keymap: ""
zimage-hash: "e3f8367fd662d9f0a93a2fa579e37fc915695324cb0a3a98f0edf68045071f8a"
ramdisk-hash: "ea49dd27e810222cbaa1aa643e45883c2c92daa3882e498c47ae6d1e0bd36513"
cmdline:
  netif_num: "1"
  mac1: 28d24428d8d3
synoinfo:
  support_disk_compatibility: no
  support_memory_compatibility: no
  esataportcfg: "0"
  support_led_brightness_adjustment: ""
  support_leds_lp3943: ""
  internalportcfg: "0xfffff"
  usbportcfg: "0"
  buzzeroffen: "0xffff"
  rss_server: https://raw.githubusercontent.com/fbelavenuto/arpl/main/rss.xml
  rss_server_ssl: https://raw.githubusercontent.com/fbelavenuto/arpl/main/rss.xml
  rss_server_v2: https://raw.githubusercontent.com/fbelavenuto/arpl/main/rss.json
  small_info_path: https://example.com/null
  security_version_server: https://example.com/smallupdate
addons:
  misc: ""
  acpid: ""
  i915: ""
  lsiutil: ""
  dbgutils: ""
  9p: ""
original-mac: macaddress
vid: "0x18a5"
pid: "0x0250"


Since losing power and then updating arpl, I have not been able to restore my Volume 1 Raid 5 volume. 
I have set this in /etc/ /etc.defaults/ and in the arpl user_config.yml, but everytime I boot into DSM drives show as external and my RAID 5 Volume 1 is not accessible at all. 
Looking for assistance, I have tried so many things and at this point am looking into other solutions over xpenolgy... its been rough when the system goes down... I only store backups with active backup but its still very time consuming and super annoying when this shiz happens. 

Edited by beefyjoe
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...