malt0r Posted February 20, 2022 Share #1 Posted February 20, 2022 Got DSM 7.0.1 U2 running on a Supermicro X9SCA-F Board. Working good so far. I also added a LSI2008 HBA Card and after adding the mpt2sas extension it's recognized as well. One small hickup though: Onboard I have 6 SATA Ports + 8 Ports from the HBA card. I want to use the 8 Ports of the HBA first then use the 6 onboard SATA ports. I changed my SataPortMap and DiskIdxMap as follows: SataPortMap=68 DiskIdxMap=0800 Now my Onboard Sata Ports start at Disk 9 but the HBA Ports still start from Disk 6. When I lower the SataPortMap to e.g. 48 the HBA Disks start at 5 but I can only use 4 Ports from the onboard controller. Any idea what's going on or I'm doing wrong? Any help appreciated. Quote Link to comment Share on other sites More sharing options...
-iliya- Posted November 25, 2022 Share #2 Posted November 25, 2022 as I understood these parameters do not work with Sas adapters - it did not work for me with 9201 and 9300 cards. These options only work with PCI cards. my 1 build xpeno - i disable all sata port on MoBo and use only 9300-16i + 9201-16i sata\sas HBA Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.