dannieboiz Posted February 15, 2022 Share #1 Posted February 15, 2022 I followed the instruction from the link below to install DSM 7 on a ReadyNAS 4200. All went perfect except Xpenology can only see 4 of the 9 drives I have on the 12 Bay. I think I may have missed something. https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ Is there a way to change it now or I have to start all over? Quote Link to comment Share on other sites More sharing options...
IG-88 Posted February 15, 2022 Share #2 Posted February 15, 2022 maybe there is a reason why its still in the developer section of the forum? just try the better tested loaders for 6.2.3 and try 7.0 later? Quote Link to comment Share on other sites More sharing options...
dannieboiz Posted February 16, 2022 Author Share #3 Posted February 16, 2022 (edited) trying to install 6.2.3 right now not having much luck. Go to loading DSM but after it reboot it couldn't detect disk station. FWIW the ReadyNAS 4200 V2 should have 2 sata controller. Might is slightly different thant he one below but inspecting the MB, I only see 4 Sata cable running to the front panel of the 6 ports from the board and the rest through what a separate bundle of cable. I'm a little confused as to how I need to configure the sataport configuration I set it at 66 assuming that I have 6 host on 1 and another 6 on another but I think I should really be setting to 48 is that the right approach? Edited February 16, 2022 by dannieboiz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.