Develop and refine the DS3622xs+ loader

yanjun · February 15, 2022

me too when I make the loader I add the mptsas3 driver .

[    5.092702] <redpill/override_symbol.c:287> Successfully restored original code of sd_ioctl
[    5.093339] <redpill/override_symbol.c:145> Freeing OVS for sd_ioctl
[    5.093880] <redpill/smart_shim.c:969> Canary finished - routing to sd_fops->ioctl = sd_ioctl_smart_shim+0x0/0x50 [redpill]<ffffffffa0002110>
[    5.095022] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[    5.095634] BUG: unable to handle kernel paging request at ffff88057bae8c00
[    5.096018] IP: [<ffff88057bae8c00>] 0xffff88057bae8c00
[    5.096018] PGD 5955067 PUD 80000005400001e3
[    5.096018] Oops: 0011 [#1] SMP
[    5.096018] Modules linked in: virtio_net(OE) virtio_pci(OE) virtio_mmio(OE) virtio_input(OE) virtio_ring(OE) virtio(OE) mpt3sas(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O) redpill(OE) [last unloaded: broadwellnk_synobios]
[    5.096018] CPU: 3 PID: 4886 Comm: sfdisk Tainted: P           OE   4.4.180+ #42218
[    5.096018] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[    5.096018] task: ffff880585dc2940 ti: ffff880582ac4000 task.ti: ffff880582ac4000
[    5.096018] RIP: 0010:[<ffff88057bae8c00>]  [<ffff88057bae8c00>] 0xffff88057bae8c00
[    5.096018] RSP: 0018:ffff880582ac7df0  EFLAGS: 00010216
[    5.096018] RAX: ffff88057bae8c00 RBX: 0000000000000000 RCX: 0000000000000000
[    5.096018] RDX: 0000000000001261 RSI: 000000000006001f RDI: ffff8805864c8000
[    5.096018] RBP: ffff880582ac7df8 R08: 000000000000000a R09: 00000000000004f6
[    5.096018] R10: ffffea00161860c0 R11: ffffffff81a0562d R12: ffff8805864c8000
[    5.096018] R13: 000000000006001f R14: 0000000000000000 R15: 0000000000001261
[    5.096018] FS:  00007f3ff8a19780(0000) GS:ffff88059fcc0000(0000) knlGS:0000000000000000
[    5.096018] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.096018] CR2: ffff88057bae8c00 CR3: 000000057d44d000 CR4: 00000000003606f0
[    5.096018] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    5.096018] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    5.096018] Stack:
[    5.096018]  ffffffffa0002150 ffff880582ac7e28 ffffffffa000bfa7 0000000000000000
[    5.096018]  0000000000000000 ffff8805864c8000 ffff8805843aac80 ffff880582ac7e78
[    5.096018]  ffffffff812c8d74 0006001f8554c658 ffff880582ac7e68 ffffffff811a18e8
[    5.096018] Call Trace:
[    5.096018]  [<ffffffffa0002150>] ? sd_ioctl_smart_shim+0x40/0x50 [redpill]
[    5.096018]  [<ffffffffa000bfa7>] sd_ioctl_canary.cold+0xc4/0x1b6 [redpill]
[    5.096018]  [<ffffffff812c8d74>] blkdev_ioctl+0x634/0x9c0
[    5.096018]  [<ffffffff811a18e8>] ? dput.part.25+0x158/0x1e0
[    5.096018]  [<ffffffff811c4f88>] block_ioctl+0x38/0x40
[    5.096018]  [<ffffffff8119d7a8>] do_vfs_ioctl+0x4b8/0x930
[    5.096018]  [<ffffffff81188669>] ? ____fput+0x9/0x10
[    5.096018]  [<ffffffff8106d86c>] ? task_work_run+0x7c/0xa0
[    5.096018]  [<ffffffff8119dcbc>] SyS_ioctl+0x9c/0xb0
[    5.096018]  [<ffffffff81564a8a>] entry_SYSCALL_64_fastpath+0x1e/0x8e
[    5.096018] Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <e0> 94 88 81 ff ff ff ff 00 88 ae 7b 05 88 ff ff 30 db 72 81 ff
[    5.096018] RIP  [<ffff88057bae8c00>] 0xffff88057bae8c00
[    5.096018]  RSP <ffff880582ac7df0>
[    5.096018] CR2: ffff88057bae8c00
[    5.096018] ---[ end trace 22a5eb6851cc625f ]---
[    5.166013] BUG: unable to handle kernel paging request at ffff88058329b9c0
[    5.166013] IP: [<ffffffff811a7d31>] put_files_struct+0x11/0xd0
[    5.166013] PGD 5955067 PUD 5958067 PMD 80000005832001e1
[    5.166013] Oops: 0003 [#2] SMP
[    5.166013] Modules linked in: virtio_net(OE) virtio_pci(OE) virtio_mmio(OE) virtio_input(OE) virtio_ring(OE) virtio(OE) mpt3sas(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O) redpill(OE) [last unloaded: broadwellnk_synobios]
[    5.166013] CPU: 3 PID: 4886 Comm: sfdisk Tainted: P      D    OE   4.4.180+ #42218
[    5.166013] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[    5.166013] task: ffff880585dc2940 ti: ffff880582ac4000 task.ti: ffff880582ac4000
[    5.166013] RIP: 0010:[<ffffffff811a7d31>]  [<ffffffff811a7d31>] put_files_struct+0x11/0xd0
[    5.166013] RSP: 0018:ffff880582ac7b28  EFLAGS: 00010096
[    5.166013] RAX: 0000000000000000 RBX: ffff880585dc2940 RCX: ffff8805860737c0
[    5.166013] RDX: 0000000000000001 RSI: ffff880583e2f2c0 RDI: ffff88058329b9c0
[    5.166013] RBP: ffff880582ac7b58 R08: 0000000000019e50 R09: ffffffff8115ba95
[    5.166013] R10: ffffea0015e79580 R11: ffffffffffffffff R12: ffff88058329b9c0
[    5.166013] R13: 0000000000000001 R14: 0000000000000000 R15: ffff88058005dee8
[    5.166013] FS:  0000000000000000(0000) GS:ffff88059fcc0000(0000) knlGS:0000000000000000
[    5.166013] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.166013] CR2: ffff88058329b9c0 CR3: 000000000560a000 CR4: 00000000003606f0
[    5.166013] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    5.166013] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    5.166013] Stack:
[    5.166013]  ffff880582ac7b40 ffff880585dc2940 ffff88058329b9c0 0000000000000001
[    5.166013]  0000000000000000 ffff88058005dee8 ffff880582ac7b78 ffffffff811a7e7c
[    5.166013]  ffff880585dc2940 ffff88058005de80 ffff880582ac7bf0 ffffffff810548de
[    5.166013] Call Trace:
[    5.166013]  [<ffffffff811a7e7c>] exit_files+0x3c/0x50
[    5.166013]  [<ffffffff810548de>] do_exit+0x27e/0xa60
[    5.166013]  [<ffffffff8109f50f>] ? kmsg_dump+0x8f/0xb0
[    5.166013]  [<ffffffff81008174>] oops_end+0x84/0xb0
[    5.166013]  [<ffffffff810426ad>] no_context+0xfd/0x2a0
[    5.166013]  [<ffffffff8104295b>] __bad_area_nosemaphore+0x10b/0x1f0
[    5.166013]  [<ffffffff81042a4e>] bad_area_nosemaphore+0xe/0x10
[    5.166013]  [<ffffffff81042e0e>] __do_page_fault+0x1ee/0x3e0
[    5.166013]  [<ffffffff8104300c>] do_page_fault+0xc/0x10
[    5.166013]  [<ffffffff81566892>] page_fault+0x22/0x30
[    5.166013]  [<ffffffffa0002150>] ? sd_ioctl_smart_shim+0x40/0x50 [redpill]
[    5.166013]  [<ffffffffa000bfa7>] sd_ioctl_canary.cold+0xc4/0x1b6 [redpill]
[    5.166013]  [<ffffffff812c8d74>] blkdev_ioctl+0x634/0x9c0
[    5.166013]  [<ffffffff811a18e8>] ? dput.part.25+0x158/0x1e0
[    5.166013]  [<ffffffff811c4f88>] block_ioctl+0x38/0x40
[    5.166013]  [<ffffffff8119d7a8>] do_vfs_ioctl+0x4b8/0x930
[    5.166013]  [<ffffffff81188669>] ? ____fput+0x9/0x10
[    5.166013]  [<ffffffff8106d86c>] ? task_work_run+0x7c/0xa0
[    5.166013]  [<ffffffff8119dcbc>] SyS_ioctl+0x9c/0xb0
[    5.166013]  [<ffffffff81564a8a>] entry_SYSCALL_64_fastpath+0x1e/0x8e
[    5.166013] Code: 83 f0 05 00 00 48 85 c0 74 03 f0 ff 00 c6 83 68 06 00 00 00 5b 5d c3 0f 1f 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <f0> ff 0f 74 0f 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 4c
[    5.166013] RIP  [<ffffffff811a7d31>] put_files_struct+0x11/0xd0
[    5.166013]  RSP <ffff880582ac7b28>
[    5.166013] CR2: ffff88058329b9c0
[    5.166013] ---[ end trace 22a5eb6851cc6260 ]---
[    5.392407] BUG: unable to handle kernel paging request at ffff880583293f98
[    5.393247] IP: [<ffffffff81162506>] unlink_anon_vmas+0x126/0x1c0
[    5.393247] PGD 5955067 PUD 5958067 PMD 80000005832001e1
[    5.393247] Oops: 0003 [#3] SMP
[    5.393247] Modules linked in: virtio_net(OE) virtio_pci(OE) virtio_mmio(OE) virtio_input(OE) virtio_ring(OE) virtio(OE) mpt3sas(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O) redpill(OE) [last unloaded: broadwellnk_synobios]
[    5.393247] CPU: 5 PID: 4345 Comm: sleep Tainted: P      D    OE   4.4.180+ #42218
[    5.393247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[    5.393247] task: ffff880586308dc0 ti: ffff880583e28000 task.ti: ffff880583e28000
[    5.393247] RIP: 0010:[<ffffffff81162506>]  [<ffffffff81162506>] unlink_anon_vmas+0x126/0x1c0
[    5.393247] RSP: 0018:ffff880583e2bd60  EFLAGS: 00010246
[    5.393247] RAX: ffff880583293f90 RBX: ffff880583293f80 RCX: 000000010033002c
[    5.393247] RDX: ffff880583293f90 RSI: ffff880582940e40 RDI: ffff8805868039c0
[    5.393247] RBP: ffff880583e2bd98 R08: ffff880581422aa0 R09: 000000010033002c
[    5.393247] R10: ffffea0016050880 R11: ffff8805842d4618 R12: dead000000000200
[    5.393247] R13: ffff880583293f90 R14: dead000000000100 R15: ffff880583293f80
[    5.393247] FS:  0000000000000000(0000) GS:ffff88059fd40000(0000) knlGS:0000000000000000
[    5.393247] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.393247] CR2: ffff880583293f98 CR3: 00000005836e4000 CR4: 00000000003606f0
[    5.393247] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    5.393247] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    5.393247] Stack:
[    5.393247]  ffffffff8115b9ed ffff880582940e40 ffff880583293f18 00007ffab15df000
[    5.393247]  ffff880583e2bde8 0000000000000000 ffff8805816bcb80 ffff880583e2bdd8
[    5.393247]  ffffffff811559b6 0000000000000000 ffff8805816bc678 0000000000000000
[    5.393247] Call Trace:
[    5.393247]  [<ffffffff8115b9ed>] ? __remove_shared_vm_struct+0x2d/0x30
[    5.393247]  [<ffffffff811559b6>] free_pgtables+0x76/0xd0
[    5.393247]  [<ffffffff8115f1b4>] exit_mmap+0xb4/0x120
[    5.393247]  [<ffffffff8104f138>] mmput+0x38/0xf0
[    5.393247]  [<ffffffff8105489c>] do_exit+0x23c/0xa60
[    5.393247]  [<ffffffff8105513e>] do_group_exit+0x3e/0xa0
[    5.393247]  [<ffffffff810551af>] SyS_exit_group+0xf/0x10
[    5.393247]  [<ffffffff81564a8a>] entry_SYSCALL_64_fastpath+0x1e/0x8e
[    5.393247] Code: 00 01 00 00 00 00 ad de 49 bc 00 02 00 00 00 00 ad de 48 8b 7e 08 f0 ff 4f 30 74 46 48 8b 56 10 48 8b 46 18 48 8b 3d 62 09 9b 00 <48> 89 42 08 48 89 10 4c 89 76 10 4c 89 66 18 e8 e6 08 01 00 48
[    5.393247] RIP  [<ffffffff81162506>] unlink_anon_vmas+0x126/0x1c0
[    5.393247]  RSP <ffff880583e2bd60>
[    5.393247] CR2: ffff880583293f98
[    5.393247] ---[ end trace 22a5eb6851cc6261 ]---
[    5.166013] Fixing recursive fault but reboot is needed!
[    5.393247] Fixing recursive fault but reboot is needed!
[    5.633093] BUG: unable to handle kernel paging request at ffff88058334a000
[    5.633568] IP: [<ffffffff811553bb>] __tlb_remove_page+0x5b/0x90
[    5.633964] PGD 5955067 PUD 5958067 PMD 80000005832001e1
[    5.634056] Oops: 0003 [#4] SMP
[    5.634056] Modules linked in: virtio_net(OE) virtio_pci(OE) virtio_mmio(OE) virtio_input(OE) virtio_ring(OE) virtio(OE) mpt3sas(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O) redpill(OE) [last unloaded: broadwellnk_synobios]
[    5.634056] CPU: 1 PID: 4888 Comm: hotplug Tainted: P      D    OE   4.4.180+ #42218
[    5.634056] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[    5.634056] task: ffff880585cf6e00 ti: ffff8805843a0000 task.ti: ffff8805843a0000
[    5.634056] RIP: 0010:[<ffffffff811553bb>]  [<ffffffff811553bb>] __tlb_remove_page+0x5b/0x90
[    5.634056] RSP: 0018:ffff8805843a3a48  EFLAGS: 00010202
[    5.634056] RAX: ffff88058334a000 RBX: ffff8805843a3b70 RCX: 0000000000000000
[    5.634056] RDX: ffff88058334a000 RSI: 0000000000000000 RDI: ffffea00160cd2c0
[    5.634056] RBP: ffff8805843a3a50 R08: 0000000000019c08 R09: 0000000000000000
[    5.634056] R10: ffffffff81718fa6 R11: ffffea00160cd2c0 R12: 0000000000408000
[    5.634056] R13: ffff880578cca038 R14: ffff8805843a3b70 R15: 0000000000408000
[    5.634056] FS:  0000000000000000(0000) GS:ffff88059fc40000(0000) knlGS:0000000000000000
[    5.634056] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.634056] CR2: ffff88058334a000 CR3: 000000057df42000 CR4: 00000000003606f0
[    5.634056] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    5.634056] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    5.634056] Stack:
[    5.634056]  0000000000407000 ffff8805843a3b28 ffffffff8115610f 0000000000457fff
[    5.634056]  0000000000457fff ffff8805860e6000 ffff880583a80000 0000000000457fff
[    5.634056]  0000000000458000 0000000000458000 ffffffff818c6d40 0000000000458000
[    5.634056] Call Trace:
[    5.634056]  [<ffffffff8115610f>] unmap_single_vma+0x4ff/0x740
[    5.634056]  [<ffffffff81156bdc>] unmap_vmas+0x4c/0xa0
[    5.634056]  [<ffffffff8115f1a1>] exit_mmap+0xa1/0x120
[    5.634056]  [<ffffffff8104f138>] mmput+0x38/0xf0
[    5.634056]  [<ffffffff8118d727>] flush_old_exec+0x477/0x610
[    5.634056]  [<ffffffff811e0020>] load_elf_binary+0x260/0x1620
[    5.634056]  [<ffffffff811deeb0>] ? load_misc_binary+0x50/0x410
[    5.634056]  [<ffffffff8118d0a2>] search_binary_handler+0x92/0x1c0
[    5.634056]  [<ffffffff811df9e5>] load_script+0x1f5/0x220
[    5.634056]  [<ffffffff81153fbf>] ? get_user_pages+0x2f/0x40
[    5.634056]  [<ffffffff8118d0a2>] search_binary_handler+0x92/0x1c0
[    5.634056]  [<ffffffff8118e59a>] do_execveat_common.isra.40+0x5aa/0x6d0
[    5.634056]  [<ffffffff8118e6e7>] do_execve+0x27/0x30
[    5.634056]  [<ffffffffa0000831>] _do_execve+0x31/0x60 [redpill]
[    5.634056]  [<ffffffffa00006c5>] SYSC_execve_shim+0x65/0x90 [redpill]
[    5.634056]  [<ffffffffa00006fd>] SyS_execve_shim+0xd/0x10 [redpill]
[    5.634056]  [<ffffffff81564d75>] stub_execve+0x5/0x5
[    5.634056]  [<ffffffff81564a8a>] ? entry_SYSCALL_64_fastpath+0x1e/0x8e
[    5.634056] Code: 4a 08 29 c8 c3 83 7f 78 13 74 4b 55 31 f6 48 89 e5 53 48 89 fb bf 00 02 00 02 e8 e1 f2 fd ff 48 85 c0 74 35 48 89 c2 83 43 78 01 <48> c7 00 00 00 00 00 48 b8 00 00 00 00 fe 01 00 00 48 89 42 08
[    5.634056] RIP  [<ffffffff811553bb>] __tlb_remove_page+0x5b/0x90
[    5.634056]  RSP <ffff8805843a3a48>
[    5.634056] CR2: ffff88058334a000
[    5.634056] ---[ end trace 22a5eb6851cc6262 ]---
[    5.635042] BUG: unable to handle kernel paging request at ffff8805832d4000
[    5.635042] IP: [<ffffffff812e7f27>] clear_page_c_e+0x7/0x10
[    5.635042] PGD 5955067 PUD 5958067 PMD 80000005832001e1
[    5.635042] Oops: 0003 [#5] SMP

yanjun · February 15, 2022

5 minutes ago, Aigor said:

Bad news

Also, I don't think it has anything to do with the driver made by pocopico, because I tried loading it manually, at least the mpt3sas.ko driver is working fine. This should also be caused by some judgments of the loader during the startup process.

Aigor · February 15, 2022

11 minutes ago, yanjun said:

Also, I don't think it has anything to do with the driver made by pocopico, because I tried loading it manually, at least the mpt3sas.ko driver is working fine. This should also be caused by some judgments of the loader during the startup process.

I'm not using mpt3sas only tg3 for broadcom

Aigor · February 15, 2022

[   25.569536] Marvell Storage Controller is found, using IRQ 0, driver version 6.0.0.1009N.
[   25.608357] Marvell Linux driver mv14xx, driver version 6.0.0.1009N.
[   25.638425] Start mv_hba_init.
[   25.652453] hba_desc->id=0.
[   25.665619] original device id=1475.
[   25.682438] ATHENA : BAR 0 :           (null).
[   25.703727] ATHENA : BAR 1 :           (null).
[   25.724922] ATHENA : BAR 2 :           (null).
[   25.746073] ATHENA : BAR 3 :           (null).
[   25.767263] ATHENA : BAR 4 :           (null).
[   25.789242] ATHENA : BAR 5 :           (null).
[   25.810424] HBA ext struct init'ed at ffff880430a7dc00.
[   25.835859] show module id[0] cached size[0x93cf50], addr[0xffffc900000f9000].
[   25.870149] show module id[1] cached size[0x26a4c0], addr[0xffffc90000a37000].
[   25.904379] HBA device id 0x1475, RunAsNonRAID:0.
[   25.926563] BUG: unable to handle kernel paging request at 000000000001c800
[   25.959540] IP: [<ffffffffa002dc29>] MV_REG_WRITE_DWORD+0x9/0x10 [mv14xx]
[   25.991516] PGD 430616067 PUD 43041e067 PMD 0
[   26.012417] Oops: 0002 [#1] SMP
[   26.027763] Modules linked in: mv14xx(O+) redpill(OE)
[   26.051470] CPU: 3 PID: 4288 Comm: insmod Tainted: G           OE   4.4.180+ #42218
[   26.087726] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019
[   26.121200] task: ffff8804311f8cc0 ti: ffff88042c124000 task.ti: ffff88042c124000
[   26.156511] RIP: 0010:[<ffffffffa002dc29>]  [<ffffffffa002dc29>] MV_REG_WRITE_DWORD+0x9/0x10 [mv14xx]
[   26.199570] RSP: 0018:ffff88042c1277e8  EFLAGS: 00010206
[   26.224483] RAX: 0000000000000000 RBX: 0000000000001520 RCX: 0000000000000001
[   26.258477] RDX: 0000000000000000 RSI: 000000000001c800 RDI: 000000000001c800
[   26.292096] RBP: ffff88042c1277e8 R08: 0000000000000002 R09: 0000000000000000
[   26.325663] R10: 0000000000000001 R11: ffffffff81a0562d R12: ffff88042c12783c
[   26.359301] R13: 0000000000000000 R14: 0000000000000020 R15: 0000000000000001
[   26.392917] FS:  00007f8b5eb93740(0000) GS:ffff8804456c0000(0000) knlGS:0000000000000000
[   26.431197] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   26.458198] CR2: 000000000001c800 CR3: 000000042b315000 CR4: 00000000000606f0
[   26.491951] Stack:
[   26.501466]  ffff88042c127828 ffffffffa0069160 00000000000dccbb ffff88042c1278f8
[   26.536874]  ffff88042c127988 0000000000000000 ffffffffa0078b78 ffff8804311a0480
[   26.571719]  ffff88042c127858 ffffffffa006a105 ffffffff81711cea ffff88042c1278f8
[   26.606699] Call Trace:
[   26.618187]  [<ffffffffa0069160>] SPI_BuildCmd+0x40/0x90 [mv14xx]
[   26.647058]  [<ffffffffa006a105>] OdinSPI_AtmelIdentify+0x35/0xa0 [mv14xx]
[   26.679526]  [<ffffffffa006a50d>] OdinSPI_Init+0xd/0xc0 [mv14xx]
[   26.707833]  [<ffffffffa0031d82>] mv_nvram_init_param+0xd2/0x4f0 [mv14xx]
[   26.739945]  [<ffffffff813843c3>] ? serial8250_console_putchar+0x33/0x180
[   26.772301]  [<ffffffffa00412a8>] core_get_chip_info+0xb8/0x230 [mv14xx]
[   26.804092]  [<ffffffff8109dc2c>] ? console_unlock+0x1bc/0x530
[   26.832271]  [<ffffffff8109e273>] ? vprintk_emit+0x2d3/0x4e0
[   26.860029]  [<ffffffff8109e49a>] ? vprintk+0x1a/0x20
[   26.883679]  [<ffffffff8109e4a9>] ? vprintk_default+0x9/0x10
[   26.910525]  [<ffffffff81129e49>] ? printk+0x46/0x4e
[   26.933873]  [<ffffffffa004152a>] Core_ModuleInitialize+0x9a/0x270 [mv14xx]
[   26.966934]  [<ffffffffa002dd25>] ? ossw_printk+0x65/0x70 [mv14xx]
[   26.996158]  [<ffffffffa002bcc4>] mv_hba_init+0x6b4/0xb00 [mv14xx]
[   27.025282]  [<ffffffffa002dd25>] ? ossw_printk+0x65/0x70 [mv14xx]
[   27.054357]  [<ffffffffa00276a9>] mv_probe+0x1c9/0x300 [mv14xx]
[   27.082159]  [<ffffffff81315dd4>] pci_device_probe+0x94/0x110
[   27.109244]  [<ffffffff813a07ba>] driver_probe_device+0xba/0x2f0
[   27.137614]  [<ffffffff813a0a69>] __driver_attach+0x79/0x80
[   27.163994]  [<ffffffff813a09f0>] ? driver_probe_device+0x2f0/0x2f0
[   27.193466]  [<ffffffff8139ea5f>] bus_for_each_dev+0x5f/0x90
[   27.220249]  [<ffffffff813a0209>] driver_attach+0x19/0x20
[   27.245763]  [<ffffffff8139fe16>] bus_add_driver+0x196/0x220
[   27.272456]  [<ffffffffa00a7000>] ? 0xffffffffa00a7000
[   27.296654]  [<ffffffff813a127b>] driver_register+0x5b/0xd0
[   27.322987]  [<ffffffff81314837>] __pci_register_driver+0x47/0x50
[   27.351798]  [<ffffffffa00a7093>] sas_hba_init+0x93/0x95 [mv14xx]
[   27.380500]  [<ffffffff810003b7>] do_one_initcall+0x87/0x1a0
[   27.407341]  [<ffffffff8112a28b>] do_init_module+0x5a/0x1bf
[   27.433639]  [<ffffffff810c7a13>] load_module+0x1c63/0x2250
[   27.459915]  [<ffffffff810c4ae0>] ? __symbol_put+0x40/0x40
[   27.485789]  [<ffffffff810c81cd>] SYSC_finit_module+0x7d/0xa0
[   27.512843]  [<ffffffff810c8209>] SyS_finit_module+0x9/0x10
[   27.539318]  [<ffffffff81564a8a>] entry_SYSCALL_64_fastpath+0x1e/0x8e
[   27.569770] Code: 00 00 55 89 f6 48 01 f7 48 89 e5 88 17 5d c3 0f 1f 00 55 89 f6 48 01 f7 48 89 e5 66 89 17 5d c3 66 90 55 89 f6 48 01 f7 48 89 e5 <89> 17 5d c3 0f 1f 00 55 89 f6 48 01 f                                                                 7 48 89 e5 8a 07 5d c3 0f
[   27.659413] RIP  [<ffffffffa002dc29>] MV_REG_WRITE_DWORD+0x9/0x10 [mv14xx]
[   27.691758]  RSP <ffff88042c1277e8>
[   27.708155] CR2: 000000000001c800
[   27.723792] ---[ end trace 3bdb4aee7fb8538e ]---

With user_config.json

{
  "extra_cmdline": {
    "pid": "0x4030",
    "vid": "0x0424",
    "sn": "2150SQRJP82ZN",
    "mac1": "00113297DF68"
  },
  "synoinfo": {

          "supportsystemperature": "no",
          "supportsystempwarning": "no",
          "maxdisks" : "16",
          "support_bde_internal_10g" : "no"

},
  "ramdisk_copy": {


}

}

altas · February 15, 2022

Test Done => Result successfully
Baremetal HP Gen8 Micro with DS3622xs
Networkcard => onboard
OnBoard HDD Controller

Aigor · February 15, 2022

Finally i installed DSM7 on DS3622xs+ but i think there is something strange in marvel handlig

To not taint post i added logs file from my Gen8
How i did it?
i used user_config from

wget https://github.com/dogodefi/redpill-loader-action/blob/main/user_config.DS3622xs.json

But with VID and PID from tinycore

build loader with tg3 modules, but without 10gbit card booted system, wait until the end, get apipa ip because i was diconnected from internet, download pat file, start installation, no automatic reboot, looking on serial i saw a loop, manualy reset, wait, installation goes well.

Feel free to ask

logGen8DS3622xs+.zip

Aigor · February 15, 2022

7 minutes ago, altas said:

Test Done => Result successfully
Baremetal HP Gen8 Micro with DS3622xs
Networkcard => onboard
OnBoard HDD Controller

Can you be more specific? i had a lot of trouble to get installed system, i'm in your same situation.

altas · February 15, 2022

Same to me
No manually Reboot, did hard reset
Current my 4TB HDD show me critial
Not verified Storage

Aigor · February 15, 2022

Just now, altas said:

Same to me
No manually Reboot, did hard reset
Current my 4TB HDD show me critial
Not verified Storage

I've successfully installed as DS3622xs on bare-metal, Denverton Supermicro server. (offline install is the only way right now)

 

Caveat: This build is going to look for "certified" Synology drives. If you're using something other than what's on the official list, you're likely to receive the dreaded "Unverified" critical drive warning after logging in.

 

I was able to get around the error by using the tutorial here: https://linustechtips.com/topic/1371655-synology-dsm-7-drive-lock-bypass/

 

TL;DR: ssh into your instance and using sudo, edit the correct file(s) for your build and drive details under /var/lib/disk-compatibility.

 

In my case, I prepended 



{"model":"ST4000LM024-2AN17V","firmware”:”0001”,”rec_intvl”:[1]},
to the "ds3622xs+_host_v7.db" file, saved, rebooted, and the warning went away. (I didn't have a *.new file listed)

I'm also able to see all the SMART details now as well.

Well done, I hope everyone will work together to make this loader more perfect while trying the loader

From Yanjun howto add your disk into synology DB

altas · February 15, 2022

Reboot from DSM not possible, looks like same as after the pat installation.

What i have to configure to get serial?!?

Aigor · February 15, 2022

9 minutes ago, altas said:

Reboot from DSM not possible, looks like same as after the pat installation.

What i have to configure to get serial?!?

ssh to ilo address, type "vsp" without a double quote, you get serial

same to me, no shutdown

Edited February 15, 2022 by Aigor

altas · February 15, 2022

Thx for the infos about critical error fix
Done and error gone

Aigor · February 15, 2022

44 minutes ago, altas said:

Thx for the infos about critical error fix
Done and error gone

which critical error and which fix?

tlsnine · February 16, 2022

Success: Bare-Metal with Working ixgbe Extension (with caveats)

TL;DR: If the onboard Intel x553 NICs are enabled, the script keeps failing on the ixgbe extension.

Supermicro 1U Denverton-based server with onboard Intel x533 NICs. All 4 ports are being recognized.

Four Seagate "unverified" drives are working fine. No errors reported.

UEFI boot from USB

The caveat: The Tinycore-RedPill build script fails with the onboard x553 NIC's enabled. I had to disable them using a jumper on the motherboard, slot in a generic e1000e Intel card to perform the build/install.

Once I got the build done using the e1000e card, I turned my server off, reenabled the onboard NIC's using the jumper, removed the PCIe network card, and it fired right up! (because the correct ixgbe extension is already part of the image and it doesn't fail trying to reload them from the net)

So, some slight-of-hand work had to be done, but it's working well now.

Thanks for everyone's help and hard work!! I hope my little blurb can help someone else.

EDIT: I should point out that http://find.synology.com doesn't always pick up my instance.

However, the Synology Assistant app, does.

Try both!

EDIT 2: Shutdown and reboot don't seem to work right now.

Edited February 16, 2022 by tlsnine

altas · February 16, 2022

which critical error and which fix?

The HDD incompatibility error

altas · February 16, 2022

@pocopico @yanjun

any idea how we can get the broken reboot fixed ?

Orphée · February 16, 2022

I will try to enable telnet and check what happens from it in the virtual machine this evening.

Orphée · February 16, 2022

@pocopico

[  OK  ] Stopped hook on all packages ready.
         Stopping hook on all packages ready...
[  OK  ] Stopped target Packages start up done.
         Stopping VPN Client...
[  OK  ] Stopped target "synoindex start daemon target".
[  OK  ] Stopped Synology Building Tasks Restore for Storage Manager.
         Stopping Synology Building Tasks Restore for Storage Manager...
         Stopping Service for irq balance...
[  OK  ] Stopped Update all disk information in disk log.
         Stopping Update all disk information in disk log...
[  OK  ] Stopped Syno Data Protection - Btrfs Snapshot Count Sync.
         Stopping Syno Data Protection - Btrfs Snapshot Count Sync...
[  OK  ] Stopped Syno Data Protection - Btrfs Deleted Subvolume Clean.
         Stopping Syno Data Protection - Btrfs Deleted Subvolume Clean...
         Stopping Synology shutdown task...
[  OK  ] Stopped Update all disks firmware status.
         Stopping Update all disks firmware status...
[  OK  ] Stopped Set arp ignore.
         Stopping Set arp ignore...
[  OK  ] Stopped Synology Dump Bootup Log.
         Stopping Synology Dump Bootup Log...
         Stopping Periodic Command Scheduler...
         Stopping Adjust md resync speed after bootup done...
         Stopping WS-Transfer Server...
[  OK  ] Stopped target Login Prompts.
[  OK  ] Stopped Synology Event-based Task Scheduler Bootup Trigger.
         Stopping Synology Event-based Task Scheduler Bootup Trigger...
[  OK  ] Stopped Synology Log bootup done.
         Stopping Synology Log bootup done...
[  OK  ] Stopped Check disk compatiblity..
         Stopping Check disk compatiblity....
[  OK  ] Stopped Single Memory Channel Action.
         Stopping Single Memory Channel Action...
[  OK  ] Stopped Execute packages' scripts during the boot-up.
         Stopping Execute packages' scripts during the boot-up...
[  OK  ] Stopped Support channel checker.
         Stopping Support channel checker...
[  OK  ] Stopped Notify system partition error happened.
         Stopping Notify system partition error happened...
         Stopping eth0 DHCP Client...
[  OK  ] Stopped Notify system is detected for unsupported drive.
         Stopping Notify system is detected for unsupported drive...
[  OK  ] Stopped Synology Database Update.
         Stopping Synology Database Update...
[  OK  ] Stopped Notify bundle drive update after bootup done.
         Stopping Notify bundle drive update after bootup done...
         Stopping Set IP Conflict Detect...
[  OK  ] Stopped Check the disk is ssd/hdd.
         Stopping Check the disk is ssd/hdd...
[  OK  ] Stopped Syno ssd cache bootup missing check.
         Stopping Syno ssd cache bootup missing check...
         Stopping WS-Discovery Server...
[  OK  ] Stopped register ds region by ip.
         Stopping register ds region by ip...
[  OK  ] Stopped Notify data volume has been repaired by drop log tree..
         Stopping Notify data volume has been repaired by drop log tree....
         Stopping WD idle3 timer...
[  OK  ] Stopped Dump synoplatform info.
         Stopping Dump synoplatform info...
[  OK  ] Stopped Notify all idle drives after bootup done.
         Stopping Notify all idle drives after bootup done...
[  OK  ] Stopped Sync disk and related smart scheduler..
         Stopping Sync disk and related smart scheduler....
         Stopping Synology Database Update Daemon...
[  OK  ] Stopped target Low priority packages start up done.
         Stopping SynoFinder's service unit...
         Stopping OAuthService's service unit...
         Stopping Docker's service unit...
[  OK  ] Stopped Reassemble Pstore log into /var/log/pstore/.
         Stopping Reassemble Pstore log into /var/log/pstore/...
         Stopping SynologyPhotos's service unit...
[  OK  ] Removed slice Synology Cache Advisor.
[  OK  ] Stopped Syno Data Protection - Btrfs Snapshot Usage Task Clean.
         Stopping Syno Data Protection - Btrfs Snapshot Usage Task Clean...
[  OK  ] Stopped Preload synopki data to cache.
         Stopping Preload synopki data to cache...
[  OK  ] Stopped Synology Bundle SSD estimate lifespan calculation on bootup.
         Stopping Synology Bundle SSD estima...ifespan calculation on bootup...
[  OK  ] Stopped Customized post-install configuration.
         Stopping Customized post-install configuration...
[  OK  ] Stopped Check normal shutdown or improper shutdown.
         Stopping Check normal shutdown or improper shutdown...
[  OK  ] Stopped Schedule smart db update.
         Stopping Schedule smart db update...
         Stopping HybridShare's service unit...
         Stopping Control RC power...
[  OK  ] Stopped Build DB link for synolog.
         Stopping Build DB link for synolog...
[  OK  ] Removed slice system-serial\x2dgetty.slice.
[  OK  ] Stopped Fan debug check.
         Stopping Fan debug check...
         Starting Remove SAS firmware update fail list...
[  OK  ] Stopped Check malware and execute rc.local.
         Stopping Check malware and execute rc.local...
[  OK  ] Stopped Check Synology HotSpare Config for Disk Compat.
         Stopping Check Synology HotSpare Config for Disk Compat...
[  OK  ] Stopped Initial Disk Health Database.
         Stopping Initial Disk Health Database...
         Stopping Synology Network Event Daemon...
         Stopping FileStation's service unit...
         Stopping Write back disk latency to DB...
[  OK  ] Stopped Notification for firmware upgrade result.
         Stopping Notification for firmware upgrade result...
         Stopping dsm6-ui-compatible's service unit...
[  OK  ] Stopped broadcast synorelayd boot state.
         Stopping broadcast synorelayd boot state...
[  OK  ] Stopped Mount usb fs.
         Stopping Mount usb fs...
[  OK  ] Stopped target PostgreSQL adapter target.
         Stopping synomkthumbd...
         Stopping synomkflvd...
         Stopping synoindexd...
[  OK  ] Stopped Syno Data Protection - Btrfs Snaptree reconstruct.
         Stopping Syno Data Protection - Btrfs Snaptree reconstruct...
[  OK  ] Stopped target Timers.
         Stopping Synology daemon for monitoring disk latency....
[  OK  ] Stopped syno-mkdhparam.service.
         Stopping syno-mkdhparam.service...
[  OK  ] Stopped Syno Data Protection - Btrfs Snapshot Meta Sync.
         Stopping Syno Data Protection - Btrfs Snapshot Meta Sync...
[  OK  ] Stopped Synology Network Event Daemon.
[  OK  ] Stopped Service for irq balance.
[  OK  ] Stopped WS-Discovery Server.
[  OK  ] Stopped Periodic Command Scheduler.
[  OK  ] Stopped Synology Database Update Daemon.
[  OK  ] Stopped Synology daemon for monitoring disk latency..
[  OK  ] Stopped synoindexd.
[  OK  ] Stopped VPN Client.
[  OK  ] Stopped Adjust md resync speed after bootup done.
[  OK  ] Stopped WD idle3 timer.
[  OK  ] Stopped Set IP Conflict Detect.
[  OK  ] Started Remove SAS firmware update fail list.
         Stopping Daemon for container terminal session...
[  OK  ] Stopped pkg-SynoFinder-fileindexd.
         Stopping SynologyPhotos face-extraction...
         Stopping SynologyPhotos Geocoding...
[  OK  ] Stopped target "Synology Foto start daemon target".
         Stopping SynologyPhotos apid...
         Stopping SynologyPhotos User Check...
[  OK  ] Reached target "SynologyPhotos stop daemon target".
         Stopping SynologyPhotos Thumbnail Provider...
         Stopping SynologyPhotos JS Server...
         Stopping SynologyPhotos Thumb...
         Stopping SynologyPhotos Check Album Service...
         Stopping SynologyPhotos Background Jobs...
         Stopping "SynologyPhotos Synotify Daemon"...
         Stopping SynologyPhotos person-clustering...
[  OK  ] Removed slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
         Stopping synoindex workerd...
         Stopping synoindex scand...
         Stopping synoindex notifyd...
[  OK  ] Stopped Daemon for container terminal session.
[  OK  ] Stopped synoindex workerd.
[  OK  ] Stopped synoindex scand.
[  OK  ] Stopped synoindex notifyd.
[  OK  ] Stopped SynologyPhotos User Check.
[  OK  ] Stopped SynologyPhotos Check Album Service.
[  OK  ] Stopped SynologyPhotos Thumbnail Provider.
[  OK  ] Stopped SynologyPhotos Background Jobs.
[  OK  ] Stopped SynologyPhotos Geocoding.
[  OK  ] Stopped "SynologyPhotos Synotify Daemon".
[  OK  ] Stopped SynologyPhotos person-clustering.
[  OK  ] Stopped SynologyPhotos face-extraction.
[  OK  ] Stopped Synology shutdown task.
[  OK  ] Stopped SynologyPhotos Thumb.
[  OK  ] Stopped SynologyPhotos JS Server.
         Stopping daemon for monitor HW/system status...
[  168.081627] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-"
[  168.231664] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={70} ascii="p"
[  168.233373] <redpill/pmu_shim.c:235> Unknown 1 byte PMU command with signature hex="70" ascii="p"
[  OK  ] Stopped Control RC power.
[  OK  ] Stopped eth0 DHCP Client.
[  OK  ] Stopped DHCP client init.
         Stopping DHCP client init...
[  OK  ] Removed slice system-dhclient.slice.
[  OK  ] Stopped synomkflvd.
         Stopping pkg-SynoFinder-synoelasticd...
         Stopping synoindex mediad...
[  OK  ] Stopped synoindex mediad.
[  OK  ] Stopped Write back disk latency to DB.
[  OK  ] Stopped WS-Transfer Server.
[  OK  ] Stopped "start/stop synovfs daemon".
[  OK  ] Stopped synomkthumbd.
         Stopping synoindex plugind...
[  OK  ] Stopped check synoindex database is needed to upgrade.
         Stopping check synoindex database is needed to upgrade...
[  OK  ] Stopped synoindex plugind.
         Stopping "FileStation Thumbnail Daemon"...
[  OK  ] Stopped check mediaserver database is needed to upgrade.
         Stopping check mediaserver database is needed to upgrade...
[  OK  ] Stopped synoindex check if there are any synoindex-related packages.
         Stopping synoindex check if there a...ny synoindex-related packages...
[  OK  ] Removed slice Synology Index slice (WAT).
[  OK  ] Stopped dsm6-ui-compatible's service unit.
[  OK  ] Stopped "FileStation Thumbnail Daemon".
[  OK  ] Removed slice dsm6-ui-compatible's slice.
[  OK  ] Stopped OAuthService's service unit.
[  OK  ] Removed slice OAuthService's slice.
         Stopping Docker Application Container Engine...
[  168.410894] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-"
[  OK  ] Stopped SynologyPhotos's service unit.
         Stopping SynologyApplicationService's service unit...
         Stopping CodecPack's service unit...
[  168.532202] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={6b} ascii="k"
[  168.534107] <redpill/pmu_shim.c:235> Unknown 1 byte PMU command with signature hex="6b" ascii="k"
[  168.694449] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-"
[  168.844484] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={74} ascii="t"
[  168.846316] <redpill/pmu_shim.c:239> Executing cmd OUT_FAN_HEALTH_OFF handler cmd_shim_noop+0x0/0x30 [redpill]
[  168.848070] <redpill/pmu_shim.c:45> vPMU received OUT_FAN_HEALTH_OFF using 1 bytes - NOOP
[  OK  ] Stopped pkg-SynoFinder-synoelasticd.
[  OK  ] Stopped FileStation's service unit.
[  OK  ] Removed slice FileStation's slice.
         Stopping Synology Application Service notification send daemon...
[  OK  ] Stopped Synology Application Service notification send daemon.
[  OK  ] Stopped CodecPack's service unit.
[  OK  ] Removed slice CodecPack's slice.
[  OK  ] Stopped SynologyPhotos apid.
         Stopping "SynologyPhotos Task center"...
[  OK  ] Stopped "SynologyPhotos Task center".
         Stopping SynologyPhotos PgBouncer...
[  OK  ] Stopped SynologyPhotos PgBouncer.
[  OK  ] Removed slice SynologyPhotos's slice.
[  OK  ] Stopped HybridShare's service unit.
[  OK  ] Removed slice HybridShare's slice.
[  OK  ] Stopped SynoFinder's service unit.
[  OK  ] Removed slice SynoFinder's slice.
[  OK  ] Stopped Docker Application Container Engine.
[  169.567514] audit_printk_skb: 99 callbacks suppressed
[  169.568426] audit: type=1325 audit(1645009792.824:44): table=filter family=2 entries=26
[  169.572237] audit: type=1325 audit(1645009792.829:45): table=filter family=2 entries=25
[  169.576105] audit: type=1325 audit(1645009792.833:46): table=filter family=2 entries=24
[  169.579890] audit: type=1325 audit(1645009792.836:47): table=filter family=2 entries=23
[  169.583835] audit: type=1325 audit(1645009792.840:48): table=filter family=2 entries=22
[  169.587666] audit: type=1325 audit(1645009792.844:49): table=filter family=2 entries=21
[  169.591475] audit: type=1325 audit(1645009792.848:50): table=filter family=2 entries=20
[  169.597514] audit: type=1325 audit(1645009792.854:51): table=filter family=2 entries=19
[  169.603407] Module [xt_ipvs] is removed. 
[  169.613699] Module [ip_vs_rr] is removed.
[  169.614435] IPVS: [rr] scheduler unregistered.
[  169.628663] Module [ip_vs] is removed.
[  169.641053] IPVS: ipvs unloaded.
[  169.649844] Module [xt_mark] is removed. 
[  169.658784] Module [iptable_mangle] is removed.
[  169.674657] Module [br_netfilter] is removed.
[  169.687056] Module [macvlan] is removed.
[  169.695806] Module [bridge] is removed. 
[  169.731184] Module [stp] is removed.
[  169.744334] Module [aufs] is removed. 
[  169.766929] Module [veth] is removed.
[  169.781078] Module [nf_conntrack_ipv6] is removed.
[  169.836930] Module [nf_defrag_ipv6] is removed. 
[  169.861708] Module [ip6table_filter] is removed.
[  169.876976] Module [ip6_tables] is removed.
[  169.898678] Module [xt_REDIRECT] is removed. 
[  169.909734] Module [xt_nat] is removed.
[  169.924892] Module [nf_nat_redirect] is removed. 
[  169.942696] Module [xt_recent] is removed.
[  169.962690] Module [xt_iprange] is removed.
[  169.973712] Module [xt_limit] is removed. 
[  169.983547] Module [xt_state] is removed.
[  169.992658] Module [xt_tcpudp] is removed.
[  170.002429] Module [xt_multiport] is removed.
[  170.014372] Module [xt_LOG] is removed.
[  OK  ] Stopped Docker's service unit.
[  OK  ] Removed slice Docker's slice.
[  OK  ] Stopped daemon for monitor HW/system status.
[  OK  ] Removed slice scemd.
         Stopping Synology Application Service pgbouncer...
[  OK  ] Stopped Synology Application Service pgbouncer.
[  172.911012] <redpill/smart_shim.c:644> Got SMART *command* - looking for feature=0xd0
[  172.912358] <redpill/smart_shim.c:388> Generating fake SMART values
         Stopping Synology Application Service vapid send daemon...
[  OK  ] Stopped Synology Application Service vapid send daemon.
[  OK  ] Stopped Synology Application Service session watcher daemon.
         Stopping Synology Application Service session watcher daemon...
[  OK  ] Stopped SynologyApplicationService's service unit.
[  OK  ] Removed slice SynologyApplicationService's slice.
         Stopping PostgreSQL adapter...
         Stopping Node.js_v12's service unit...
[  OK  ] Stopped Node.js_v12's service unit.
[  OK  ] Removed slice Node.js_v12's slice.
[  OK  ] Stopped target Hook on volume ready.
         Stopping PostgreSQL database server...
[  OK  ] Stopped PostgreSQL database server.
[  OK  ] Stopped PostgreSQL adapter.
[  OK  ] Stopped target Synology bootup done.
[  OK  ] Stopped Synology Cache Advisor Boot Clean Up.
         Stopping Synology Cache Advisor Boot Clean Up...
[  OK  ] Stopped target Synology Web console login available.
[  OK  ] Stopped target High priority packages start up done.
         Stopping ScsiTarget's service unit...
         Stopping ActiveInsight's service unit...
         Stopping SMBService's service unit...
         Stopping Python2's service unit...
         Stopping SecureSignIn's service unit...
[  OK  ] Stopped Synology Web console login prepare.
         Stopping Synology Web console login prepare...
[  OK  ] Stopped Before upgrade ready.
         Stopping Before upgrade ready...
[  OK  ] Stopped target Multi-User System.
         Stopping Synology Schedule Daemon...
         Stopping Internet Service Daemon...
         Stopping Synology log notification service...
         Stopping daemon for monitor logs and generate alert...
         Stopping daemon for handle hotplug event...
         Stopping Log Rotate Daemon...
         Stopping Synology Cron Daemon...
         Stopping synoconfd daemon...
[  OK  ] Removed slice BTRFS Optimization.
         Stopping Network Time Service...
         Stopping Synology SCGI...
         Stopping Synology log accounting service...
         Stopping Synology daemon for monitoring space/disk/cache status...
[  OK  ] Stopped System Profile Tuning.
         Stopping System Profile Tuning...
         Stopping SSD Cache Pin File Daemon...
[  OK  ] Removed slice RAID Resync Process. ...ing Resync, Repair and Reshape..
         Stopping Login Service...
         Stopping synobackup daemon...
         Stopping OpenBSD Secure Shell server...
[  OK  ] Removed slice Synology Swap Works.
         Stopping Avahi daemon...
         Stopping findhost daemon...
[  OK  ] Stopped Synology Event Task Scheduler Init.
         Stopping Synology Event Task Scheduler Init...
         Stopping Daemon of performance alarm...
         Stopping deal with remote/ISO mount during when bootup and poweroff...
         Stopping Synology CGI Auth Daemon...
[  OK  ] Removed slice Synology Flashcache.
[  OK  ] Removed slice BTRFS Space Reclaim.
         Stopping Synology SCGI SocketIO...
         Stopping SSDP service...
[  OK  ] Stopped Entry for WS-Transfer and WS-Discovery Server.
         Stopping Entry for WS-Transfer and WS-Discovery Server...
[  OK  ] Stopped target Packed In File Protocols.
         Stopping Shared Folder Sync Daemon...
         Stopping Samba SMB Daemon...
[  OK  ] Stopped synobackup daemon.
[  OK  ] Stopped Synology log accounting service.
[  OK  ] Stopped Login Service.
[  OK  ] Stopped synoconfd daemon.
[  OK  ] Stopped Log Rotate Daemon.
[  OK  ] Stopped findhost daemon.
[  OK  ] Stopped Network Time Service.
[  OK  ] Stopped Synology Cron Daemon.
[  OK  ] Stopped daemon for monitor logs and generate alert.
[  OK  ] Stopped Synology daemon for monitoring space/disk/cache status.[  181.483440] Module [udf] is removed.

[  OK  ] Stopped Daemon of performance alarm.
[  OK  ] Stopped daemon for handle hotplug event.
[  OK  ] Stopped Synology log notification service.
[  OK  ] Stopped Synology SCGI SocketIO.
[  OK  ] Stopped SSD Cache Pin File Daemon.
[  OK  ] Stopped Synology CGI Auth Daemon.
[  181.504919] Module [isofs] is removed.
[  OK  ] Stopped Internet Service Daemon.
[  OK  ] Stopped OpenBSD Secure Shell server.
[  OK  ] Stopped active insight monitor.
         Stopping SCSI Target Monitor...
         Stopping Synology Storage Console Server...
[  OK  ] Removed slice OpenBSD Secure Shell server.
[  OK  ] Removed slice Internet Service Daemon.
[  OK  ] Removed slice Performance alarm.
         Stopping Daemon for Resource Monitor...
[  OK  [  181.539206] Module [loop] is removed.
] Stopped Check Synology HotSpare Config.
         Stopping Check Synology HotSpare Config...
[  OK  ] Removed slice Synology DSM Storage Service.
[  OK  ] Removed slice synobackup daemon slice.
[  OK  ] Stopped Daemon for Resource Monitor.
[  OK  ] Stopped SCSI Target Monitor.
[  OK  ] Stopped Synology Storage Console Server.
[  OK  ] Stopped Python2's service unit.
[  OK  ] Stopped SSDP service.
[  OK  ] Stopped Avahi daemon.
         Stopping D-Bus System Message Bus...
[  OK  ] Removed slice SSDP service.
[  OK  ] Removed slice Python2's slice.
         Stopping iSCSI Service...
         Stopping SNMP Daemon...
[  OK  ] Stopped D-Bus System Message Bus.
[  OK  ] Stopped Samba SMB Daemon.
         Stopping NetBIOS name server...
[  OK  ] Stopped target User and Group Name Lookups.
[  OK  ] Stopped NetBIOS name server.
[  OK  ] Stopped Samba Environment Setup Unit.
         Stopping Samba Environment Setup Unit...
[  OK  ] Stopped deal with remote/ISO mount during when bootup and poweroff.
[  OK  ] Stopped SMBService's service unit.
[  OK  ] Removed slice SMBService's slice.
[  OK  ] Stopped LIO Userspace-passthrough daemon(tcmu-runner).
[  181.662407] Module [ocs_fc_lio] is removed.
[  181.663522] ocs_lnx_xport_detach: releasing transport layer
[  181.684576] [10409]: ocs_fc_lio: ocs_thread_thunk:1054::ocs_proxy    terminated
[  181.693647] Module [tcm_qla2xxx] is removed.
[  181.720673] Module [qla2xxx] is removed. 
[  181.729645] Module [libfc] is removed.
[  181.737611] Module [scsi_transport_fc] is removed.
[  181.745661] Module [iscsi_target_mod] is removed.
[  181.762630] Module [tcm_loop] is removed. 
[  181.774618] Module [vhost_scsi] is removed.
[  181.788647] Module [vhost] is removed.
[  181.794648] Module [target_core_user] is removed.
[  181.811632] Module [target_core_ep] is removed. 
[  181.833658] Module [target_core_multi_file] is removed.
[  181.854695] Module [target_core_file] is removed. 
[  OK  ] Stopped SecureSignIn's service unit.
[  OK  ] Removed slice SecureSignIn's slice.
[  181.871651] Module [target_core_iblock] is removed.
[  181.886669] Module [target_core_mod] is removed.
[  OK  ] Stopped SNMP Daemon.
[  OK  ] Removed slice SNMP.
[  OK  ] Stopped ActiveInsight's service unit.
[  OK  ] Removed slice ActiveInsight's slice.
[  181.905731] Module [syno_extent_pool] is removed.
[  181.906625] iSCSI:extent_pool.c:780:ep_exit syno_extent_pool successfully finalized
[  181.913733] Module [rodsp_ep] is removed.
[  181.914535] iSCSI:target_core_rodsp_server.c:844:rodsp_server_exit RODSP server stopped.
[  OK  ] Stopped iSCSI Service.
[  OK  ] Stopped ScsiTarget's service unit.
[  OK  ] Stopped target Hook on root ready.
[  OK  ] Stopped always preprocess jobs before any package is started.
         Stopping always preprocess jobs before any package is started...
[  OK  ] Removed slice Package Center Slice.
[  OK  ] Stopped target Network is Online.
[  OK  ] Stopped Wait for Synology Network to be Configured.
         Stopping Wait for Synology Network to be Configured...
[  OK  ] Stopped Check if network is ready.
         Stopping Check if network is ready...
[  OK  ] Removed slice ScsiTarget's slice.
         Stopping Nginx...
[  OK  ] Stopped Nginx.
[  OK  ] Stopped Synology SCGI.
[  OK  ] Removed slice Synology DSM desktop service.
         Stopping Synology task manager...
[  OK  ] Stopped Shared Folder Sync Daemon.
[  OK  ] Removed slice Shared Folder Sync.
[  OK  ] Stopped target Synology shared folders.
[  OK  ] Stopped Load Bypass Traverse Checking.
         Stopping Load Bypass Traverse Checking...
[  OK  ] Stopped Migrate all volume and share to quota DB.
         Stopping Migrate all volume and share to quota DB...
[  OK  ] Stopped Prepare var service tmp.
         Stopping Prepare var service tmp...
[  OK  ] Stopped Check share snapshot.
         Stopping Check share snapshot...
[  OK  ] Stopped Check Synology shared folders.
         Stopping Check Synology shared folders...
[  OK  ] Stopped Keep var services homes existing.
         Stopping Keep var services homes existing...
[  OK  ] Stopped target Synology data volumes.
[  OK  ] Stopped Synology volume mount post hook.
         Stopping Synology volume mount post hook...
         Stopping Synology volume service...
[  OK  ] Stopped target Network.
         Stopping PPPoE...
[  OK  ] Stopped Set Multiple Geteway.
         Stopping Set Multiple Geteway...
         Stopping Synology Network Daemon...
[  OK  ] Stopped Synology Network Daemon.
         Stopping D-Bus Session Message Bus...
[  OK  ] Stopped D-Bus Session Message Bus.
[  OK  ] Stopped PPPoE.
[  OK  ] Stopped target Network (Pre).
[  182.730940] BTRFS info (device dm-2): using free space tree
[  182.731964] BTRFS info (device dm-2): using free block group cache tree
[  OK  ] Stopped Synology volume service.
[  OK  ] Stopped Synology filesystem check service.
         Stopping Synology filesystem check service...
[  OK  ] Stopped target Synology storage pool.
         Stopping Synology virtual space service...
[  OK  ] Stopped Synology virtual space service.
         Stopping Synology space service...
[  182.972846] md2: detected capacity change from 12242124800 to 0
[  182.974022] md: md2: set sdb3 to auto_remap [0]
[  182.975115] md: md2 stopped.
[  182.975119] md: unbind<sdb3>
[  OK  ] Stopped Synology Schedule Daemon.
[  OK  ] Removed slice Task Scheduler Group.
[  182.980953] md: export_rdev(sdb3)
[  182.989936] <redpill/smart_shim.c:359> ATA_CMD_ID_ATA confirmed *no* SMART support - pretending it's there
[  OK  ] Stopped Synology space service.
         Stopping Synology filesytem check on bootup...
         Stopping Synology firmware DLMC...
[  OK  ] Stopped Synology firmware DLMC.
[  OK  ] Stopped Synology filesytem check on bootup.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Sockets.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Synology synoboot2 done.
[  OK  ] Stopped target Slices.
[  OK  ] Removed slice User and Session Slice.
[  OK  ] Stopped bootup upgrade sha package.
         Stopping bootup upgrade sha package...
[  OK  ] Stopped target System Initialization.
[  OK  ] Stopped Apply kernel variable vm.min-free-kbytes.
         Stopping Apply kernel variable vm.min-free-kbytes...
         Stopping unbind USB device...
         Stopping Synology swap...
[  OK  ] Stopped target Synology local user and group ready.
[  OK  ] Stopped Check Synology group info consistency.
         Stopping Check Synology group info consistency...
[  OK  ] Stopped Check Synology user info consistency.
         Stopping Check Synology user info consistency...
[  OK  ] Stopped Synology Log bootup start.
         Stopping Synology Log bootup start...
         Stopping System Logger Daemon...
[  OK  ] Stopped Set Eunit Sequence.
         Stopping Set Eunit Sequence...
[  OK  ] Stopped Check /etc/synoinfo.conf.
         Stopping Check /etc/synoinfo.conf...
[  OK  ] Stopped target Create SDK locks directory.
[  OK  ] Stopped Apply kernel variable kernel.sem at least 1024.
         Stopping Apply kernel variable kernel.sem at least 1024...
[  OK  ] Stopped target Swap.
[  OK  ] Stopped Apply kernel variable kernel-shmmni at least 16384.
         Stopping Apply kernel variable kernel-shmmni at least 16384...
[  OK  ] Stopped Apply Kernel Variables.
         Stopping Apply Kernel Variables...
[  OK  ] Stopped Apply etc/sysctl.conf kernel variable..[  183.046699] md1: detected capacity change from 2147418112 to 0
[  183.047807] md: md1: set sdb2 to auto_remap [0]
[  183.048638] md: md1 stopped.
[  183.049191] md: unbind<sdb2>

         Stopping Apply etc/sysctl.conf kernel variable....
[  OK  ] Stopped Apply etc.defaults/sysctl.conf kernel variable..
         Stopping Apply etc.defaults/sysctl.conf kernel variable....
[  OK  ] Stopped Clean UPS config.
         Stopping Clean UPS config...
[  OK  ] Stopped target Synology root filesystem (rw) ready.
         Stopping Disabling fan checking flag ......
[  183.064955] md: export_rdev(sdb2)
[  OK  ] Stopped unbind USB device.
[  183.072710] <redpill/smart_shim.c:359> ATA_CMD_ID_ATA confirmed *no* SMART support - pretending it's there
[  OK  ] Stopped System Logger Daemon.
[  OK  ] Removed slice Synology DSM internal service.
[  183.218755] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-"
[  183.368795] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={74} ascii="t"
[  183.370341] <redpill/pmu_shim.c:239> Executing cmd OUT_FAN_HEALTH_OFF handler cmd_shim_noop+0x0/0x30 [redpill]
[  183.370343] <redpill/pmu_shim.c:45> vPMU received OUT_FAN_HEALTH_OFF using 1 bytes - NOOP
[  OK  ] Stopped Disabling fan checking flag ....
[  183.386679] Module [zram] is removed.
[  183.387749] zram: Removed device: zram0
[  183.395807] zram: Removed device: zram1
[  183.404540] zram: Removed device: zram2
[  183.411569] zram: Removed device: zram3
[  OK  ] Stopped Synology task manager.
[  OK  ] Stopped synodsmnotify.
         Stopping synodsmnotify...
[  OK  ] Stopped Create Volatile Files and Directories.
         Stopping Create Volatile Files and Directories...
[  OK  ] Reached target Shutdown.
[  183.424515] zram: Removed device: zram4
[  183.433912] zram: Removed device: zram5
[  184.077809] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[  184.081616] systemd-journald[5725]: Received SIGTERM from PID 1 (systemd-shutdow).
[  185.083422] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[  185.086761] systemd-shutdown[1]: Unmounting file systems.
[  185.087782] systemd-shutdown[1]: Unmounting /config.
[  185.092630] systemd-shutdown[1]: Unmounting /tmp.
[  185.236789] EXT4-fs (md0): re-mounted. Opts: (null)
[  185.239279] EXT4-fs (md0): re-mounted. Opts: (null)
[  185.240136] EXT4-fs (md0): re-mounted. Opts: (null)
[  185.241006] systemd-shutdown[1]: All filesystems unmounted.
[  185.241975] systemd-shutdown[1]: Deactivating swaps.
[  185.242871] systemd-shutdown[1]: All swaps deactivated.
[  185.243793] systemd-shutdown[1]: Detaching loop devices.
[  185.245099] systemd-shutdown[1]: All loop devices detached.
[  185.246256] systemd-shutdown[1]: Detaching DM devices.
[  185.247191] systemd-shutdown[1]: All DM devices detached.
systemd-shutdown: run synobios_uninit OK
[  185.269638] systemd-shutdown[1]: Powering off.
[  186.272393] <redpill/override_symbol.c:250> Obtaining lock for <GetHwCapability+0x0/0x100 [broadwellnk_synobios]/ffffffffa0acb430>
[  186.274465] <redpill/override_symbol.c:250> Writing original code to <ffffffffa0acb430>
[  186.275831] <redpill/override_symbol.c:250> Released lock for <ffffffffa0acb430>
[  186.277096] <redpill/override_symbol.c:221> Obtaining lock for <GetHwCapability+0x0/0x100 [broadwellnk_synobios]/ffffffffa0acb430>
[  186.279082] <redpill/override_symbol.c:221> Writing trampoline code to <ffffffffa0acb430>
[  186.280471] <redpill/override_symbol.c:221> Released lock for <ffffffffa0acb430>
[  186.281733] <redpill/bios_hwcap_shim.c:66> proxying GetHwCapability(id=8)->support => real=0 [org_fout=0, ovs_fout=0]
[  186.622615] sd 1:0:0:0: [sdb] Stopping disk
[  186.623404] sd 0:0:0:0: [synoboot] Stopping disk

at stop VM hangs there

Same for reboot :

[  OK  ] Stopped Synology swap.
[  OK  ] Stopped Synology task manager.
[  OK  ] Stopped synodsmnotify.
         Stopping synodsmnotify...
[  OK  ] Stopped Create Volatile Files and Directories.
         Stopping Create Volatile Files and Directories...
[  OK  ] Reached target Shutdown.
[  338.243314] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[  338.247315] systemd-journald[5737]: Received SIGTERM from PID 1 (systemd-shutdow).
[  339.248654] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[  339.252487] systemd-shutdown[1]: Unmounting file systems.
[  339.253502] systemd-shutdown[1]: Unmounting /config.
[  339.258797] systemd-shutdown[1]: Unmounting /tmp.
[  339.373373] EXT4-fs (md0): re-mounted. Opts: (null)
[  339.375876] EXT4-fs (md0): re-mounted. Opts: (null)
[  339.376925] EXT4-fs (md0): re-mounted. Opts: (null)
[  339.377783] systemd-shutdown[1]: All filesystems unmounted.
[  339.378751] systemd-shutdown[1]: Deactivating swaps.
[  339.379710] systemd-shutdown[1]: All swaps deactivated.
[  339.380622] systemd-shutdown[1]: Detaching loop devices.
[  339.381959] systemd-shutdown[1]: All loop devices detached.
[  339.382926] systemd-shutdown[1]: Detaching DM devices.
[  339.383843] systemd-shutdown[1]: All DM devices detached.
systemd-shutdown: run synobios_uninit OK
[  339.406926] systemd-shutdown[1]: Rebooting.
[  340.409886] <redpill/override_symbol.c:250> Obtaining lock for <GetHwCapability+0x0/0x100 [broadwellnk_synobios]/ffffffffa0acb430>
[  340.412033] <redpill/override_symbol.c:250> Writing original code to <ffffffffa0acb430>
[  340.413431] <redpill/override_symbol.c:250> Released lock for <ffffffffa0acb430>
[  340.414736] <redpill/override_symbol.c:221> Obtaining lock for <GetHwCapability+0x0/0x100 [broadwellnk_synobios]/ffffffffa0acb430>
[  340.416769] <redpill/override_symbol.c:221> Writing trampoline code to <ffffffffa0acb430>
[  340.418199] <redpill/override_symbol.c:221> Released lock for <ffffffffa0acb430>
[  340.419486] <redpill/bios_hwcap_shim.c:66> proxying GetHwCapability(id=8)->support => real=0 [org_fout=0, ovs_fout=0]
[  341.393665] sd 1:0:0:0: [sdb] Stopping disk
[  341.394548] sd 0:0:0:0: [synoboot] Stopping disk

Maybe some ACPI issue

Edited February 16, 2022 by Orphée

Aigor · February 16, 2022

@Orphéei don't want to bother you, but for better reading, you should use "code" tag to put log, code pieces and so on

🙂

Orphée · February 16, 2022

@AigorI don't know what you ara talking about 😛

Dfds · February 16, 2022

Quote

@Orphée when you reply to a post there is a toolbar at the top of the window, the icon I’ve circled in red is the code tag button.

Orphée · February 16, 2022

35 minutes ago, Dfds said:

@Orphée when you reply to a post there is a toolbar at the top of the window, the icon I’ve circled in red is the code tag button.

It was a joke dude

neonflx · February 16, 2022

I was able to install using tc 3622, needed to disable 10g on board now it boots recognizes all 10 drives but installation fails at 8%

After I was able to create the img, i re-enable the 10g nic, booted and found the nas the proceeded to install 6 drives running of LSI 9211-8 and 4 running of the onboard sata, used the pat created by tc

any ideas?

Edited February 16, 2022 by neonflx

Aigor · February 16, 2022

14 minutes ago, neonflx said:

I was able to install using tc 3622, needed to disable 10g on board now it boots recognizes all 10 drives but installation fails at 8%

any ideas?

Can you access to some logs?

neonflx · February 16, 2022

2 minutes ago, Aigor said:

Can you access to some logs?

How can I access the logs?

Develop and refine the DS3622xs+ loader

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation